Used Panel Sizing Machine for sale (80,437)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Gbsdpfx Aezz R Rgoanjw Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 - Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: used, Year of construction: 1989, with electrical height and swivel adjustment   used, great condition Panhans make Type 688 Year of manufacture 1989 Machine no. 287 GS-approved Godpfx Aajvxr Sqonsbw Motor 5.5 kW brake Cutting width approx. 1250 mm Cutting length approx. 2700 mm swiveling up to 45 ° Scoring unit Parallelogram protection Electric height adjustment Electric swivel adjustment Angle stop as a miter stop Extraction connection D 120 mm / 80 mm Required space approx. 2800 mm x 3400 mm x 1400 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 2000, Used machine Year of manufacture 2000 special SCM guide system of the saw carriage. The arc-shaped arrangement between balls and running guides as well as the hardened contact surfaces ensure exceptional and constant precision the scorer can be swivelled in and out from outside without any problem; a special plate enables precise positioning the fence is extremely robust and can be used for both rip cuts and angle cuts; fast return to the initial position. The precise flip stops enable a direct reading of the dimensions over the entire length Table dimensions 830 x 1200 mm Saw carriage 1500 x 290 mm Cutting length 1500 mm Tilt of the saw blade 45° max. diameter main saw blade 300 mm max. diameter scoring saw blade 100 mm max. cutting height 90° = 95 mm max. cutting height 45° = 67 mm Saw blade speed 4000 rpm Scoring saw speed 8000 rpm Godpozlbr Aefx Aanjbw Cutting width with parallel guide 1000 mm Diameter extraction port 100 mm Motor 4 kW Weight: 425 kg Availability: at short notice Storage location: Röllbach

Condition: good (used), Power supply: 24 VDC Gedpfx Aaozcvd Nonobw Application: Lisec machines (AKL) Width: 425 mm Height: 160 mm Depth: approx. 30 mm Weight: 1402 g Condition: good, second-hand

Condition: used, Year of construction: 1987, With new electrics – electronic brake – automatic star-delta start-up. Machine overhauled, various parts replaced, cleaned – function-tested – fully adjusted – trial cuts. Used, in good condition Manufacturer: Ulmia Model: 1728 Year of manufacture: 1987 Gbjdpfx Aaovwgibensw Machine no.: 262 GS-certified Reinforced motor 5.0 kW Steel guides Carriage length approx. 1600 mm Cutting width approx. 950 mm Cutting length (sliding table travel) 1900 mm Cutting height approx. 105 mm Max. blade diameter 350 mm Tiltable up to 45° Parallelogram guard Weight approx. 600 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Gbodpfx Aswhi Sleanjw Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: used, Year of construction: 1994, with Supergehrfixangle mitre fenceused, good conditionmake Panhanstype 690year of construction 1994machineNo. 1286GS wood dust testedmotor 5.5 kWsteel guidescarriage length approx. 3200 mmcutting width approx. 1250 mmswivel up to 45°scoring unitparallelogram protectiontable top extensionhydraulic height adjustmenthydraulic swivel adjustmentdigital display:- cutting angleangle stop as mitre fence with length compensation / super mitre fixsuction connection D 120/80 mmspace requirement approx. 3200 mm x 3700 mm x 1700 mmWeight approx. 1000 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loadingHandover as is, as inspectedwithout guarantee and warranty Gedpfx Aasvxr Npsnsbw

Condition: good (used), Version with key switch Gbodpfx Aaeyr Inlensw Area of application: Lisec machines Width: 425 mm Height: 160 mm Depth: 50 mm Weight: 1078 g Condition: Good, second-hand

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels Gbedpfjf Ih Hcex Aanjw also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm Gbedpfx Aszrk N Reanjw - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm - Arbor flange diameter 87.5 mm - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Dimensions of folded machine 2020x3380x1200mm Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: new, Panel saw VPS 22-51 VR ED KS Holzkraft -Exhibition machine- -----Technical data----- Cutting length: 5100 mm, Cutting height: 2200 mm, Cutting depth: 60 mm, Saw blade diameter: 250 mm, Motor: 3 kW, Dust extraction port diameter: 100 mm, Space requirement (L x W x H): 6300 x 1800 x 3200 mm - Clamping force of clamping system: 250 kg Gbjdewnrf Uspfx Aanew Dust extraction connection: - Dust extraction port diameter: 100 mm - Minimum air flow for dust extraction: 1800 m³/h - Minimum air velocity: 20 m/s Equipment: - Lower material support: metal rollers - Adjustable slat bed: automatic - Vertical dimension display: digital - Horizontal dimension display: digital - Panel clamping system - Locking of the saw carriage: pneumatic Electrical data: - Power of drive motor: 3 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: used, Year of construction: 1981, used, in good condition cleaned, lubricated partially overhauled fully adjusted parts replaced Brand: Martin Model: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Parallelogram guard Table extension Height adjustment hydraulic Tilting adjustment hydraulic Godpfxowkvw To Aanebw Mitre fence Extraction connection D 120/80 mm Required space approx. 2800 mm x 3400 mm x 1200 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without any warranty or liability

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x2800x1100 mm Weight 310 kg Total power requirement 3,8 kw Gbjdjvz Hcpopfx Aansw

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Gedpjvyd Dbofx Aanjbw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1860x2700x1450 mm Weight 350 kg Total power requirement 5 kw Gsdpfx Aasvz Hahjnsbw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1450x2700x1450 mm Weight 350 kg Total power requirement 3,5 kw Gsdpfx Aovz E Udeansbw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6800x3350x1500 mm Gjdpfx Aaovz E Hgonjbw Weight 700 kg Total power requirement 5 kw

Condition: new, Panel saw ALTENDORF F 25, Type 6 -Exhibition machine- Double roller carriage, swiveling, manual height and swivel adjustment, parallel fence with manual fine adjustment, angle/miter fence, prepared for subsequent installation of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, cutting width: 1,000 mm, cutting height: 100 mm, max. saw blade diameter: 315 mm, max. saw blade overhang: 104 mm, Non-CE version: max. saw blade diameter: 350 mm, max. saw blade overhang: 121.5 mm, rip fence extendable up to: 3,450 mm, speeds: 4,200 rpm, motor power: 4.0 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - Godpfx Aou R S Hceansbw - new exhibition machine -

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, Gbedpfez Eh Nljx Aansw 30 station ATC, through spindle coolant, swarf conveyor.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, compressed air connection: 6 bar, plate length: 1,200 mm, product height (max.): 3 mm, tank capacity: 3 l, warranty duration: 12 months, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Gbsdswg E Hvopfx Aanew Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. Gbjdpfxot Dyl Sj Aanew +F00 SN 158.719A

Condition: new, Year of construction: 2025, Sawblade tiltable 0-46 ° Length of the rolling table 3200 mm cutting width 1000 mm Motor output 5,5 kW Cutting height 179 mm Cutting height at 45° 123 mm Saw blade diameter 500 mm Speed 3/4/5000 U/min. weight of the machine ca. 1300 kg Gbsdpfxszycp Ej Aansw

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush Gbjdpfsxwvruex Aanew - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches Godpfozf Nk Tsx Aanobw • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: Gbsdszyy Daepfx Aanow - Cutting length: 2700 mm - Cutting width: 1050 mm - Cutting height: approx. 145 mm - Motor: 5.5 kW - 2,800 - 4,000 - 5,500 rpm - Hydraulic lifting, lowering, and swiveling of the saw unit up to a maximum of 45.5° - With scoring unit - With parallel cutting device Weight: approx. 1,270 kg