Used Pet Blow Moulding Machine for sale (65,251)

Condition: used, Year of construction: 2003, Overview SIG Corpoplast BLOMAX 18 Series III rotary stretch blow moulder for PET bottles, built in 2003. Rated output is up to 27,000 bottles per hour on 0.5, 1.0 and 1.5 L bottles and up to 24,300 bottles per hour on 2.0 L. The machine last produced 1.0 L bottles for mineral water and carbonated soft drinks at 27,000 bottles per hour with a PCO 1881 neck finish. It ran in production until August 2026 and is still installed and under power. The preform feeding (box tipper, inclined elevator and unscrambler) and the chiller are part of the sale. Technical data - Manufacturer: SIG Corpoplast - Model: BLOMAX 18 Series III - Year of construction: 2003 - Machine type: rotary stretch blow moulder for PET bottles - Rated output: max. 27,000 bottles per hour on 0.5 / 1.0 / 1.5 L, max. 24,300 bottles per hour on 2.0 L Gedpfx Aez Ng Aaed Reui - Last format: 1.0 L bottle, 32 g, 28 mm PCO 1881 neck finish, petaloid base - Blow air pressure: 40 bar - Blow air consumption, nominal: 1,072 m³/h on 0.5 L and 1,724 m³/h on 1.0 L at 27,000 bottles per hour - Connected load: 255 kVA machine, 62 kVA chiller - Working voltage: 400 V, 3 phases + N, 50/60 Hz - Rated current: 480 A, max. fuse 500 A - Control voltage: 24 V DC - Dimensions (L x W x H): 11.5 x 11.2 x 4.2 m including preform feeding - Weight: 30,550 kg - CE marked Scope of delivery - BLOMAX 18 blow moulder with preform heating oven and blow wheel - Two operator panels with touchscreen HMI - Electrical cabinets and media connections - Preform box tipper for octabins and mesh boxes - Inclined preform elevator - M. Tanner preform unscrambler with access platform - Chiller - Spare parts from stock, list available on request Blow moulds are not included in the sale. Condition Used in water bottling until August 2026. The machine is still installed and under power and can be inspected. Availability Dismantling is possible from week 49 of 2026; the machine is available from 30 November 2026.

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW Guedpfx Aecuwpted Rsi INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz Gusdpfexl Hi Tsx Ad Rei delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 1994, condition: ready for operation (used), A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible. Gedpjzl Enhofx Ad Roui

Condition: used, Wittmann Battenfeld 3 Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Calculated displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar distance: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Gjdpszpwrgsfx Ad Rjui Disassembly and collection must be carried out by the buyer. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Guodpfx Adjz A Ialo Rsi

Condition: used, Year of construction: 2001, machine/vehicle number: SO95, Technical Specifications & Performance Data The Sipa 8/4 is a compact, reliable Blow Molding Machine ideal for small-format PET bottle production within a used bottling line. Built for continuous duty in beverage production and industrial packaging environments, it combines proven mechanical design with essential utilities to support efficient operation. Manufacturer: Sipa Model: 8/4 Year of manufacture: 2001 Category: Blow Molding Machine Nominal output: up to 3,500 bph (bottles per hour) No. of cavities: 4 Bottle format: 0.06 L (60 ml) Primary container material: PET (preform-based stretch blow molding) Gedpfx Ade Adywxj Rsui Preform neck type: Corvaglia e 29/21 Included utilities: Compressor (1), Chiller (1) Not included: Preform unscrambler (0), Preforms tipper (0), Elevator (0), Air Recovery System (0) Condition: In storage Documentation: Manuals available Advanced Automation & Control Systems This second hand Sipa 8/4 offers straightforward operation through a centralized operator interface designed for routine parameter adjustments. Heating, stretching, and blowing parameters can be configured to suit the specified preform and neck finish, supporting consistent bottle quality for small-volume applications. Central control panel with recipe/parameter management for quick setup Multi-zone preform oven for precise thermal conditioning (typical for the series) Integrated alarms and diagnostics to assist maintenance and uptime Safety features included with guarding and interlocks around moving and hot sections Standard industrial three-phase electrical connection (exact ratings available on request) Production Line Integration Capabilities Designed for seamless integration in a used bottling line, the machine can be fed by a preform hopper/elevator and unscrambler (not included) and discharges to conveyors toward rinsing, filling, capping, and labeling systems. Its output matches compact lines handling small PET bottles for water, juice, functional shots, syrups, and other beverages. Upstream compatibility with preform tipper, elevator, and unscrambler systems Downstream integration with rinsing, filling, capping, labeling, inspection, and packing Supports beverage production workflows for water, juice, beer, wine, and more (downstream processes may include PET, glass, or aluminum packaging) Format changes within the 0.06 L range via appropriate molds and change parts Machine Condition & Maintenance History The unit is currently in storage with manuals available, facilitating recommissioning and operator training. As with any second hand industrial packaging equipment, a full inspection, routine service of the pneumatic and heating circuits, and verification of utilities are recommended prior to start-up. Wear parts and consumables should be assessed to align with production targets. Operational Performance & Versatility With four cavities and a 3,500 bph nominal speed, th...

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Gedpfj Adtttjx Ad Reui

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Gedpfx Adsz Hn Spe Rsui

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Gsdpfx Aszhpg Ted Reui delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1996, functionality: fully functional, working width: 300 mm, planing height: 200 mm, High-performance planing and profiling machines / Four-sided planer Manufacturer: Weinig Type: Hydromat 30 / H 30 N The machine comes from a parquet manufacturing facility. Planing width: approx. 300 mm (according to the model designation) Planing height: approx. 120 mm (estimated) Spindle arrangement: Bottom (surfacing), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Feed rate adjustable, 12 - 120 m/min. Voltage: 380 V, 50 Hz Godpez D Exbjfx Ad Roui Expected availability from January 2027!

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Gusdpfxsyab I Ue Ad Rsi

Condition: ready for operation (used), Year of construction: 1999, operating hours: 57,830 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 400 ccm/s Screw speed 218 1/min Plasticising rate max. 75 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 35 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads Gsdpfjy Nk Tajx Ad Reui Additional Options: - 1 x Air valve - 3 x Core pulls - Robot interface according to Euromap 12

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Gedpfeibyatjx Ad Reui Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Year of construction: 2021, condition: used, Clamping force: 2700kN, injection volume: 500cm³, injection pressure: 3500bar, EUROMAP size: 2700-1750, rated power: 22kW, weight: approx. 10.7t, nozzle contact force: 58kN, total current: 138A, upstream fuse: 160A, max. short-circuit current: 10kA, enclosure type (UL): 1, hydraulic motor operating hours: 730h, hydraulic pump (clamping force): 65h, operating system active: 3,360h, was regularly maintained, is in well-maintained condition, an on-site inspection is possible. Guodpfx Adjz Ekdlo Rsi

Condition: used, Year of construction: 2013, machine/vehicle number: ET255, Used FUJI 410 sleeve applicator labeling machine for PET 10000 BPHTechnical Specifications & Performance DataThe Fuji Seal 410 DT-STH-DHA is an automatic linear sleeve labeling machine designed for the application of sleeve labels to PET bottles. Built in 2013, this high-performance unit reaches a maximum output of 10,000 bottles per hour, supporting efficient label application in industrial packaging and beverage production environments.Manufacturer: Fuji SealModel: 410 DT-STH-DHAYear of construction: 2013Maximum speed: 10,000 bottles per hourMachine configuration: LinearContainer material: PETCurrent bottle format: 2.0LLabeling method: Sleeve applicationMaximum reel diameter: Ø 500 mmWorking table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for controlled and simplified operation. Its six-reel configuration and automatic reel changeover are designed to support continuity during production, reducing interruptions associated with reel replacement. Clockwise operating direction is specified for integration planning and conveyor layout.Siemens PLC control system6 label reelsAutomatic reel changeoverElectrical supply: 400V, 3 Ph+N+TElectrical rating: 16ACompressed-air pressure: 6 barProduction Line Integration CapabilitiesThis sleeve labeling machine can be positioned downstream of filling and capping equipment and upstream of secondary packaging machinery in a used bottling line. Its linear architecture is suitable for inline PET bottle handling and can be coordinated with conveyors, accumulation systems, inspection equipment, shrink wrappers, and palletizing equipment. The stated 2.0L format provides a defined basis for assessing bottle-handling components and change-part requirements.Automatic sleeve labeling is applicable to beverage production lines processing soft drinks, still water, sparkling water, milk, beer, wine, alcoholic beverages, oil, and preserved products. As with other industrial packaging machines, line synchronization should consider bottle stability, conveyor speeds, sleeve material, and downstream package requirements.Machine Condition & Maintenance HistoryThe machine is stated as ready for use, refurbished, and supplied with compatible spare parts. A 6-month warranty is indicated. This condition makes the unit suitable for operators seeking second hand bottling equipment intended for prompt integration into a production line. The machine is offered under an as-inspected sale condition.Operational Performance & VersatilityThe Fuji Seal sleeve labeling system is intended for accurate automatic application of sleeve labels on PET bottles. Sleeve labeling provides a versatile decoration solution for beverage production and industrial packaging, allowing bottle presentation to be adapted to product and brand requirements. The label magazine, six reel positions, and automatic changeover arrange... Gujdpfjz E Dg Hsx Ad Rji

Condition: used, Year of construction: 2010, Overview Sidel SBO 10/10 Universal rotary stretch blow moulder with 10 cavities, built in 2010, for PET bottles. The machine is still installed and can be visited by appointment. It is offered together with its preform feeding system and a Sidel-Alsim air conveyor. Technical data - Manufacturer: Sidel - Model: SBO 10/10 Universal - Year of manufacture: 2010 - Number of cavities: 10 - Neck finish: 28 mm PCO 1881 - Products: PET bottles Scope of Delivery - Stretch blow moulder | Sidel | SBO 10/10 Universal | 10 cavities, operator panel | 2010 - Preform feeding system | Sidel | Preform hopper, elevator and roller unscrambler | 2010 - Air conveyor | Sidel-Alsim | Bottle air conveyor at the outfeed | 1999 Condition Gusdpfx Ado Af S E Ie Rsi Still installed. Inspection on site is possible by appointment. Availability Available immediately.

Condition: excellent (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 678 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 operation hours: 78454 h clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included: Machine WITHOUT robot!! screen text german Guodpfez A U Ivjx Ad Rei CEE-socket 16A pressure accumulator for parallel function of hydr.ejector and core pulling core pulling hydraulically 2x machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: repair required (used), Year of construction: 1998, functionality: not functional, For sale: Demag 110 9 t machine, year 1998. The machine is not operational and requires refurbishment. Guodpfjx A Sptjx Ad Roi

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Gjdpsztzqzefx Ad Rsui

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Guodpeznx Hiofx Ad Rji

Year of construction: 1990, condition: used, Clamping force: 250kN, operating voltage: 380V, heating power: 3.46kW, pump motor power: 7.5kW, total power: 11.3kW, weight: 1.5t, with documentation, has been serviced. Gedpfj Ah Tyxex Ad Roui

Year of construction: 1996, condition: used, lamping force: 500kN, max. holding force: 37kN, mold protection force: 3-37kN, max. opening force: 37kN, max. increased opening force: 194kN, max. opening stroke (adjustable): 375mm, min. mold installation height: 250mm, max. distance between platens: 625mm, clear distance between tie bars: 320x320mm, platen dimensions: 490x490mm, max. ejector force: 38kN, max. ejector retraction force: 26.7kN, max. ejector stroke (hydraulic): 150mm, screw diameter: 25mm, screw L/D ratio: 20, max. screw stroke: 100mm, max. shot volume: 49cm³, max. nozzle contact force: 60kN, max. nozzle retraction stroke: 180mm, total installed power: 15.5kW, length: 4030mm, width: 1850mm, height (horizontal/vertical): 2000/3060mm, weight without oil: 3.06t, an on-site inspection is possible. Guedpfo Ah Tyisx Ad Rji

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Gusdpfx Adeymn Rvj Rji Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Gujdow E E Evepfx Ad Rji Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.