Used Plasma Cutting Machine for sale (66,528)

Condition: good (used), Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm Nkedpfx Aeyuu H Hsbvjw -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm cutting length: max. 3.000 mm wire feeding speed: 5 - 120 mtr./min Nsdpfsyxgtuox Abvekw * machine is equipped with chamfering unit by grinding*

Condition: used, Year of construction: 2013, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Nksdpfx Asx N Nc Hobvsw Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1989, Diameter max. 75 mm Dimensions (L/W/H) 800x600x1200 mm weight ca. 150 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Njdpfoxrg D Rox Abvskw Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Main current (20% ED) 5 - 280 A Main current (100% ED) 180 A power supply 3 x 400 V In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Nsdpeyu U E Nofx Abvskw

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Nksdjyxc Afspfx Abvow

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Highly dynamic and precise CNC laser machine Njdpfsyvfuwsx Abvokw solid polymer concrete machine body cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control

Condition: good (used), Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice Njdpfev Tz N Iox Abvjkw -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 04/2028, type of input current: AC, total length: 440 mm, total width: 1,700 mm, total height: 470 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 470 mm, space requirement length: 440 mm, space requirement width: 1,700 mm, Cutting LEO with extended infeed conveyor Pretzel Bun Baguette - Schneider Tabletop unit made of stainless steel Knife height adjustable for average Belt speed adjustable DGUV V3 tested Connection 230 / 240V, 50 Hz, ready to plug in Passage width / height 140/90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW machine With guarantee optional: - Mobile table for LEO - Cutting - freight costs - Shipping wooden crate Nksdpfx Aof Epwvjbvjw VISIT our sales center with bakery equipment and many bakery machines

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back Nedpfx Asx H A Rxsbvekw This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 14250 kg Control Unit Brand BYSTRONIC Main Drive Laser power 6000watt IPG Number of axis 3 Additional Equipment Incl ByTrans Extended This 3-axis Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 was manufactured in 2014. Ideal for precision fiber laser cutting, this machine ensures efficient operation and consistent performance. Consider the opportunity to buy this Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 fiber laser cutting machine. Contact us for more information. Nkjdjx D Eivjpfx Abvjw Application Types Cutting

Year of construction: 2016, condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Nsdpfx Aex D Dpbobvekw Incl tower This 3-axis AMADA LC-3015F1NT 4kW CO2 was manufactured in 2016. It features a 4000-watt CO2 resonator and handles a maximum sheet size of 3000x1500mm, including a tower. If you are looking to get high-quality laser cutting capabilities, consider the AMADA LC-3015F1NT machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,197 h, This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information. Nkodpfx Abox E Eb Devjw Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,843 h, Main Drive Njdpsx D R Dxjfx Abvskw Number of axis 3 Additional Equipment Resonator: 4kW Co2 This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Nkedpoywwrfefx Abvsw Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: Nkodoywwq Uspfx Abvew • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: good (used), Year of construction: 2003, Paper cutting machine Polar 66, year of manufacture 2003, light barriers, air table, program control, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment. Nkodpfx Aen Hqgnsbvsw

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Nkedpfefirx Nsx Abvjw Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 64,820 h, machine/vehicle number: A1220A0892, laser hours: 34,068 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 710 kg, overall weight: 11,500 kg, space requirement height: 2,260 mm, space requirement length: 9,600 mm, space requirement width: 7,760 mm, working range: 3,000 mm, Special equipment: + 3200 on Laser TruFlow 6000 + RotoLas with automatic. Chuck + Base jaws jaw type 7-9 + Prism set jaw type 8 + Base carrier with sliding device + Workpiece carrier D 15-310 mm Standard equipment: - Closed machine frame with integrated laser unit, - Movement unit for high-precision machining, - Torque drive in combination with linear direct drives, - Closed beam guidance, - Single cutting head strategy, - Cooling unit, - Automatic pallet changer in longitudinal direction, - Wide longitudinal conveyor belt, - 17" touch color screen, - Work area lighting, - Position laser diode, - Spray device, - PierceLine, - FocusLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - Universal cutting head quick-change device (UTI), - ControlLine, Control - Simple / advanced workshop programming, - Fast Reproduction - Integrated technology data, - Automatic shutdown, - Production plan, - Programmable cutting gas/pressure selection, - SprintLine, - ContorLine, - Microweld, - FasLine, - AdjustLine, - Teleservice, - Diagnostic functions, - Online help, - FlyLine Data transfer - USB interface, - RJ-45 network connection Safety - CE marking, - Light barriers, - Laser monitoring system, - Multi-chamber extraction system, - Compact dust extraction system, - Machine cover with Makrolon panes Extended machine equipment: + Thin sheet metal - Productive package - High-speed cutting Nsdpfsvn Stmex Abvskw - Lens cutting head 130mm focal length - Compressed air cutting + Pallet changer cross including safety device + MDE interface + LoadMaster including loading station and spreading magnet

Condition: like new (used), functionality: fully functional, Very nice mobile paper cutting machine for sale. Heavy-duty construction with hydraulic clamping. Can store up to 99 jobs, equipped with light safety curtains and cutting guide light. LCD screen, single phase 230 volts. Complete with extra knife, cutting strips, tools, and manual. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: Netherlands). Regards, Henk Hoos. Nodsyvhryjpfx Abvokw

Condition: used, Year of construction: 2008, Crowning CNC controlled Bending length 4250 mm Njdpfx Ajyvr Ewjbvskw 5-axis backgauge Work area lighting Parking position 900 mm Hydraulic lower tool clamping Hydraulic upper tool clamping CNC lower tool displacement Installation height 615 mm ACB preparation

Condition: used, Year of construction: 2008, Crowning CNC controlled Bending length: 4250mm 6-axis backgauge Work area lighting Park position: 900mm Lower tool hydraulic clamping Upper tool hydraulic clamping Lower tool CNC positioning Nsdpsyvr Apjfx Abvjkw Installation height: 615mm ACB preparation

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, STOCK MACHINE - IMMEDIATELY AVAILABLE New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Nkodpfx Absywufijvjw Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 4,000mm x 2000mm Connection value max. 30kW Installation area approx. 11,000mm x 4,000mm x 2,200mm The machine is included 24 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years, of which we have been selling their fiber lasers for around 8 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. Njdpfxew Udy No Abvskw This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air) • Light barrier • Programmable • Jogger – RAB2 • Lift – L600-3 • Three extra spare knives Nodpfx Absytb A Sjvjkw • In production • Available: 05/2026