Used Plastic Baler for sale (6,303)

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: Very good! Fully checked for operation. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Feel free to request a quotation. Isdsykrm Ajpfx Aadsan At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly have the right machine at your disposal. You are very welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we have ample time to inform you properly and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Processing

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder Isdpfx Aex E U Hcjadoan - Condition: The silos have always been stored indoors and are in very good condition. Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Year of construction: 2012, condition: good (used), Colortronic Dry-Flex M400 Granule Dryer Iajdpfx Aaexlqztsdon For sale is a used Dry-Flex M400 granule dryer from Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (Germany) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating power: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granule dryer / plastic dryer Area of ​​application: Plastics processing, injection molding, extrusion Condition: Used, functional Financing through our bank is also possible. komplett-konzept.leasingo.de Buy Colortronic Dry-Flex M400 granule dryers and other items at a great price – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Iedpfx Asf Ey Eaeadoan Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, functionality: unexamined, Year of construction: 2020, Kuhn FBP 3135 Intelliwrap baler wrapper (2020) Iasdsyack Djpfx Aadjn

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Iaedpfoxbgnhjx Aadon Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2016, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 1,190 mm, total length: 6,500 mm, total width: 1,950 mm, total height: 450 mm, power: 0.75 kW (1.02 HP), motor manufacturer: SEW, Equipment: type plate available, Plastic Modular Belts / Belt Conveyor Condition: Used Year of manufacture: 2016/2017 Total length: approx. 6,500 mm Total width incl. motor/feet: approx. 1,950 mm Total width without motor: approx. 1,320 mm Conveyor width: approx. 1,190 mm Conveying height (adjustable): approx. 410 to 450 mm Material: Steel/Plastic Belt type: Plastic Colour: Light grey/Dark grey Includes SEW motor (0.75 kW) with Movimot (variable speed control) Includes feet (height-adjustable) Stock quantity: 7 units Price per unit Internal item number: 2026021103 The conveyor system was operational up until dismantling. Due to the excellent craftsmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We are happy to provide a customised offer or assist you with design and installation matters. Simply tell us about your requirements and site conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have successfully completed projects for companies in a variety of industries, such as logistics, pharmaceuticals, crafts, and electronics. Together, we will develop solutions to efficiently and sustainably optimise your processes and material flow. We can even offer fully automated sorting systems or additional components such as order picking racks or containers. Features: Condition: Fully operational, with signs of use Ideal for rapid material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) Isdpfx Aaoyinbuedoan

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Power supply: 3/N/PE/400V AC Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Scope of delivery: (see picture) Ijdpfjgqux Njx Aadean (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: good (used), Included in the scope of delivery: 01x open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimension: front half-side open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Isdpjw E D Iiefx Aadoan Colour: blue Weight per unit: 1.59 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be requested from us depending on the delivery location and delivery scope.

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Colour: similar to anthracite grey Weight: 0.62 kg per unit Notes: The material is food-safe and made of polypropylene (PP). General information about the item: Iaodpfx Ajw E Ixrsadjn This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery.

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: With every machine, we supply a bundle of baling wire (120 wires). Need additional bundles of baling wire? Request a no-obligation quote. Iedpfxsyfnfko Aadean At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly get the right machine. You are welcome to inspect the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have ample time to inform you properly and show you the right machines. We are happy to assist you! Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile baler, waste processing.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Ijdpsx Irw Rsfx Aadjan Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Ideal for plastic drums, crates, bins. Ijdpfx Aaewxfggjdean For price contact seller for more information & a video of the machine operating if required.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational Iodpox Dnb Usfx Aadean • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Iedpfx Aaok Abpaodjan Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: ready for operation (used), A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading. Iaedpsw I E Diofx Aadjn

Condition: used, Year of construction: 2017, Mono rotor shredder 800 series 2017 used, working blades and sieve in good condition, ready for use. including switch box. Iaedpfxswcp H Ss Aadjn 30 kW, 40 mm sieve, other sizes in consultation, rotor length 800 mm, hopper dimensions 800 x 1200 x 950 mm Depth machine is immediately available and can be inspected.

Condition: new, Year of construction: 2025, Plastic processing plant(s) In any size and for any capacity. Ijdpfxsvi I Dwj Aadean Plastic, Wood, Rubber, Customized/ designed to your available space. are you looking for a partner to design, manufacture, install and also assist in the operation of your plant. call or email us, don't forget to mention your name, Firmaname and phone number, we will definitely call you.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel Iaodsx A U Ncjpfx Aadsn • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Iodpfx Aaoygx Uredoan Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Isdpfx Aajxpxhvjdoan Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. This item is part of an online auction Iedpfsyc Sqxex Aadsan Sale is subject to the approval of the client.

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. Iodpjyc Sh Djfx Aadoan This item is part of an online auction. The sale is subject to the approval of the seller.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 112010, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works, and without packaging. The press is cleaned and function-tested. Technical details: Isdpfx Aajwnpyvjdoan Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation site: indoor / covered outdoor Serial number: 112010 Year of manufacture: 2011 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 113889, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Iaodpfx Aswnpx Eoaden Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales/hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation location: indoors / outdoors under cover Serial number: 113889 Year of construction: 2012 We point out the respective original documentation, which can be obtained directly from the manufacturer.