Used Plastickoil Concep Qs for sale (869)

Year of construction: 2017, condition: used, New: Yes Rsdpfx Aexu Dfwsh Ujl Power: 133 kW (181 HP)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 245 h, load capacity: 3,600 kg, lifting height: 4,830 mm, free lift: 1,840 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,683 kg, total length: 2,340 mm, drive type: Elektro, construction width: 1,600 mm, Reach Truck Load center of gravity: 600 Fork width: 140 mm Rsdpfx Ahjwf Skxo Ujl Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Dimos model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EQS4542FU. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Full free lift,

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Robatech Concept B 5/4: 5 kg, 4 hose connections. The gluing unit has been serviced by us and is fully operational. Rodpexr Dp Rsfx Ah Usl

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Rodsdx R Dmopfx Ah Ujl Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Homag Edgeteq S-380 Profiline / PROFI KDF 670 Max edge thickness: 12 mm Max panel thickness: 60 mm Max rolled material thickness: 3 mm Min workpiece width: 70 mm Processing units and groups: End trimming / pre-milling unit Strip edge magazine Cross-cutting saw unit Flush / radius / chamfer trimming stations Corner copying unit Rjdpfx Asx Itf Nsh Ujl Profile scraper blade Flat scraper blade Polishing unit Edge sanding Edge sanding groups Control system: Homag powerTouch

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, Ganomat Selekta and Case Clamp We are offering a Ganomat Selekta machine as well as a case clamp for sale. Both machines have only been used for a few days and are therefore in excellent, almost new condition. Rodpfew U Nxwox Ah Uol Location: Bosnia and Herzegovina For further information or pictures, please feel free to contact us.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 879 1 0052, clamping force: 3,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Redpfxoxtmpvs Ah Usl

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Rodpoh I Ahxsfx Ah Ujl Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1095512-001, type of input current: AC, input voltage: 380 V, input current: 25 A, power: 9.5 kW (12.92 HP), Robatech Concept Diamond 8/6 glue unit. This unit has: - 6 hose connections - a separate display with an internal controller - an automatic filling system - 8 liter tank capacity Rodpfx Ahjwazrzj Uel The glue unit has been completely cleaned internally and externally by us, tested and is fully functional.

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Redpfx Ahedx R D Ds Uol Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Homag EDGETEQ S-380 - Optimat KDF 660 SC Max. edge bonding thickness: 12 mm Max. workpiece thickness: 60 mm Max. thickness of rolled material: 3 mm Redpfx Aox Itb Reh Usl Min. workpiece width: 70 mm Suitable for PUR glue PUR melting unit Strip/edge magazine Joint milling unit NC-controlled pressure zone Cut-off saw unit (cut to length) Trimming/radius/chamfer stations Corner copying unit Profile scraper, flat scraper Polishing unit (brushing)

Condition: like new (used), Year of construction: 2012, operating hours: 15 h, functionality: fully functional, EMCO control system (PC control, Windows-based, 12.1" LCD screen, 1 x RS232, 2 x USB, 3 x LAN 10/100-bit) Table size 700 x 520 mm Max. table load: 500 kgs T-slots on the table: 5 x 18 x 100 mm X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Distance between spindle nose and table surface: 100–600 mm Speed: 0–10000 rpm Spindle taper: SK40 Rapid traverse X/Y/Z: 24 m/min Rsdpsx Atv Usfx Ah Ujl Feed rate X/Y/Z: 10 m/min Drive power: 13 kW Power requirements: 400 V / 3 PE Full load: 20 kVA Weight: 4200 kg Dimensions Dimensions (L/W/H): 2100 x 2500 x 2700 mm Equipment and accessories: - Coolant system - Tools - Machine feet The machine is in nearly new condition. It was used in a training workshop.

Condition: used, Year of construction: 2007, clamping force: 420 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,000 kg, load hours: 53,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Rodjxr N Urspfx Ah Ujl

Condition: used, Year of construction: 2016, Marel labelling machine - Concept 500 - Top labeller Redpfx Aoxnkh Ssh Uol

Year of construction: 2025, condition: new, functionality: fully functional, table height adjustment: 300 mm, Equipment: USB port, Workshop workstation with adjustable worktop height – Workbench PowerLift and Workbench Standard tables. A solid adjustable table with the possibility of adjusting the worktop height is an ideal solution for demanding users. Adjustable worktop height: mechanical, reliable height change allows you to adjust the work station to individual needs, ensuring ergonomics and work comfort. Worktop adjustable in the range of approx.: 760-1130 [mm] The height of the worktop and tool board is adjusted mechanically using the included folding crank or any screwdriver. Solid construction: Made of the highest quality materials, it guarantees stability even with uneven load. Load capacity up to 500 kg: The table is designed for working with heavy tools and materials, ideal for intensive use. Mobility: Extendable wheels allow easy movement of the work station in the workshop, without compromising stability during work. Lighting: Equipped with a professional lamp with adjustable light intensity, adjusted locally using a knob or through the building management system. As standard, the table is equipped with lighting in the Dali system. Electrical panel: standard emergency button, three 230V sockets and a lighting intensity controller, which increases functionality and work safety. An additional fourth socket is located under the table top. Tool board: Perforated board allows convenient organization of tools, helping to maintain order at the workstation. As a renowned manufacturer of workbenches, Karnatech offers a 100% Polish product, characterized by the highest quality of workmanship and attention to detail. PowerLift is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. We also have more budget workstations without the possibility of lifting the worktop in various versions. Workstations designed and manufactured in the EU. Redpfxswn Da Do Ah Uol

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) Rjdpfxjdx R Dts Ah Uol • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: excellent (used), Year of construction: 2018, Variable feed rate 8–14 m/min Boomerang TFU 140/20 interface Upper roller pressure Release agent spraying unit for workpiece Jointing milling group 40 mm jointing cutter set Interface for Baltivan pre-melter QA65 N 1200 / 1400 gluing unit Rsdpfx Ahex Rhmao Usl Coated tank for EVA/PU adhesive Magazine for edging strips from 3 mm and up Edging thickness up to 8 mm Pressure zone with 2 additional pressure rollers Front and rear edge lubricant End trimming unit Antistatic solution spraying system Multi-stage milling group Copying / shaping unit Multi-stage scraper group MZ40 Cleaning agent spraying unit for workpiece Brush unit with 2 motors PowerTouch control system The machine is sold without tools Available January 2026

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Rodsu T Tt Tepfx Ah Uol Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Movement system: suction cups.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: - Cutting capacity at 90° (round): 250 mm Rodpfxoxup Rfs Ah Uel - Cutting capacity at 90° (flat): 275 x 180 mm - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: good (used), Year of construction: 1997, Müller Martini Graphac Concept – Type MM 1 (24”) Year of manufacture: 1997 _____ TECHNICAL SPECIFICATIONS Description Specification Format range 16 – 28 1/8″ Cylinder circumference 24″ = 609.6 mm Printing width max. 515 mm (min. 200 mm) Paper width max. 520 mm (20 ½″) Roll diameter max. 1270 mm (50″) Core diameter pneumatic – for 70 mm cores Printing sleeves one 76 mm spindle for MM 1, 2 and 3 – not suitable for Alpha UV drying 6 UV lamps – 2 per printing unit (optional for Alpha) Side register yes – switchable Web direction Main drive 1/3 – straight Web tension control Work 1 + 2 / Work 2 + 3 / Work 3 + 4 Web tension 8 mm Printing units 1 station – central shaft Ø 70 mm Embossing station 1 station for embossing or die-cutting Matrix waste rewind 2 × rewind – double shaft Sheeter 1 sheeter with Ø 70 mm shafts Punching unit 2 double punching stations in fixed layout Die-cutting cylinder 1 magnetic cylinder with micrometric fine adjustment Cross perforation window perforation and suitable for 80 g paper Longitudinal perforation 2 cylinders with 4, 6, 8, 12 divisions – pitch 23.3 mm Punching stations 2 stations – pneumatic punch removal Slitting station 3 × upper, lower and edge trim knives Cross cutting external sheeter – cross knife Folding unit G17 – special fold – min. sheet 210 mm Cross cutting type 6 – 24 teeth rotary knife, fully adjustable Unwinder Motorised – roll Ø max 1270 mm / 70 mm core Rewinder Motorised – roll Ø max 1270 mm / 70 mm core Plate mounting 1 × 70 mm sleeve for Graphac Concept Printing pressure 0.14 mm adjustment Rsdpfxoxv A Dhe Ah Ujl Web thickness up to 0.22 mm printing thickness Printing speed up to 250 m/min _____ TOOLING & ACCESSORIES • Print sleeves and magnetic cylinders • Various punching, slitting and perforating tools • UV lamps and cooling system • Complete documentation and technical drawings The 6th printing unit is included – however, the infeed frame for the 6th unit is not available (it was previously removed and is no longer usable).

Condition: new, functionality: fully functional, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,700 kg, empty load weight: 3,740 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, number of seats: 21, Year of construction: 2025, fuel: diesel, machine/vehicle number: NEW-12, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seating capacity: 19+1+1 - (COC / 2007/46 for 5.5t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Remote control key Active 'Assist' service system Electric windows and heated side mirrors AGM 12V 95 Ah battery + additional AGM battery Additional pulley for second compressor (roof air conditioning) Factory-installed automatic climate control (4.5 kW, independent of roof air conditioning) 93-liter fuel tank Cruise control Additional hot water heating installed at factory Auxiliary battery Adjustable multifunction steering wheel 5-inch color driver display 10.25" MBUX multimedia radio system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Equipment package (reinforced front and rear suspension, long-life battery, reinforced shock absorbers, reinforced front axle) 205/75 / R16C summer tires (reinforced) Spare wheel Lane departure warning system Active brake assist Hill start assist Crosswind assist JA7 – Blind Spot Assist BA3 – Active Brake Assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (legally certified) Suspended, adjustable driver’s seat with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), chock SEGE passenger seats with full adjustment (reclining backrests and split side supports) Seats equipped with: armrests, 3-point seat belts, magazine nets, handles, contoured headrests Seats made of artificial leather and perforated synthetic leather, black with colored accents, manufactured by Intap 19+1+1 seating configuration Platforms spanning the entire length of the vehicle Partition wall behind the last row of seats Windows – double-glazed, tinted, FLOCK Curtains on rails – black Four convectors along the entire length of the passenger compartment (approx. 3 m) Convector heating for the passenger compartment, controlled by potentiometer, produced by VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via Climatronic panel, with individual adjustment for each passenger via X-Line panels White LED lighting on entry step White LED ceiling lighting White LED passenger compartment lighting LED platform lighting – orange Contour LEDs White LED trunk lighting Audio/video kit: additional DVD player Rjdpfx Ahjibu U Io Ujl LCD monitor, roof-mounted at the co-driver’s seat Wired microphone Speakers in the passenger compartment Reversing camera Recessed floor Luggage racks on both sides of the passenger compartment Non-slip, waterproof PVC flooring Safety hammers - 3 units Sliding roof with end cap enabling emergency exit Seat belt fixing mark (sticker) Ergonomic handle at vehicle entry Interior trim in eco-leather and soft-touch material – easy to clean Thermal insulation for interior Electric panoramic door – heated Delivery, leasing, or financing available. Available for immediate delivery. Contact us: Auto-Wardenga Irenäus Wardenga – also via WhatsApp

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force Redpjdx Daaefx Ah Ujl • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: used, Year of construction: 2018, The print head is not working properly and must be replaced. The cost of a new one is 4000€, so for 9000€ you have a brand new printer and with guarantee. You save more than 10.000€, price new from the factory is 21.000€. Rjdpfsx Dlf Dex Ah Usl Five big frames and five small frames are included in the price (Cost more than 1.000€). Digital screen maker. Up to 600 dpi. From computer to printed item in less than 8 Minutes. Can print an image from 50 x 50mm up to 420 x 620mm. Transport through Europe could be available at a reasonable price.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 300 mm, turning diameter: 200 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 1,600 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 300 kg, Operating voltage: 230 V Rsdpow Ivvijfx Ah Uel Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height over bed: approx. 100 mm Travel: X: approx. 100 mm Z: approx. 200 mm The machine is equipped with a tailstock, a three-jaw chuck, a special tool turret including a mobile workbench and suitable accessories.

Condition: good (used), Year of construction: 2002, Müller Martini Graphac Concept UV, 5-color press, Year of manufacture: 2002 Type MM 2 (24”) In very good condition and available immediately. This press has been meticulously maintained and comes equipped with numerous valuable options and components, making it ideal for high-quality UV printing and finishing tasks. Technical specifications: Format range: 16–28 1/8" Cylinder circumference: 24” = 609.6 mm Maximum printing width: 508 mm (minimum 200 mm) Maximum paper width: 520 mm (20 ½”) Maximum roll diameter: 1270 mm (50”) Core diameter: pneumatic – for 70 mm cores (option for 76 mm) Printing sleeves: only one 76 mm spindle for MM 1, 2, 3 (not applicable for Alpha) UV drying: up to 3 UV lamps, 2–3 per unit (air and water cooled) Side register: Yes – switchable Web direction: Main drive 1/3 – straight Web tension control: Work 1+2, Work 2+3 Web tension: 8 mm Printing units: 1 station – central shaft Ø 70 mm Embossing station: 1 station for embossing or die-cutting Matrix waste removal: 2× rewind – double shaft Sheeter: 1 sheeter with Ø 70 mm shafts Punching unit: 2 double punching stations (fixed layout) Die-cutting cylinder: 1 magnetic cylinder with micrometric fine adjustment Cross perforation: window perforation and suitable for 80 g paper Longitudinal perforation: 2 cylinders with 4, 6, 8, 12 divisions – perforation pitch 23.3 mm Punching stations: 2 stations – pneumatic punch removal Slitting: 3× upper, lower and edge trim knives Cross cutting (external sheeter): cross knife Folding: G17 special folding, minimum sheet 210 mm Cross cutting type: 6–24 teeth rotary knife, fully adjustable Unwinder: motorised, roll Ø max 1270 mm, 70/76 mm cores Rewinder: motorised, roll Ø max 1270 mm, 70/76 mm cores Plate mounting: 1 piece 70 mm sleeve, 1 piece 76 mm sleeve for Graphac Printing pressure: 0.14 mm adjustment Rsdpfxjxu I Rwe Ah Uol Web thickness: up to 0.22 mm printing thickness Printing speed: up to 250 m/min