Used Plate Development for sale (13,519)

Condition: ready for operation (used), NOVALITH / Measuring plate / Hard rock plate / 3000x1500x1000mm incl. accessories & adjustable feet -Plate dimensions 3000x1500x1000mm -Tilting device -Adjustable feet Dimensions: L x W x H 3 x 1.5 x 1 meters / Weight approx. 4000 KG Lredpfxj Aaz Nho Ah Sou Errors and omissions excepted.

Condition: ready for operation (used), Measuring plate / cast plate / layout plate / stand, type 4000x1500x1300mm incl. 2 x tailstocks -Plate dimensions L x W x H 4000x1500x1300mm -2 x tailstocks / center height 400mm Lrjdj Aazgaspfx Ah Seu -Adjustable feet -Total weight approx. 2500 KG Errors and omissions excepted.

Condition: ready for operation (used), Granite – Measuring plate & height gauge TESA – Micro-Hite - Plate dimensions: 3000x1300x350 mm Lrsdpfx Aj Aazamjh Sou - 2 x tailstock centers / center height 250 mm - Height gauge – TESA Micro-Hite / measuring range up to 600 mm Dimensions: L x W x H 3.3 x 1.4 x 1 meter / Weight approx. 3000 kg Errors and omissions excepted.

Condition: used, Year of construction: 1982, machine/vehicle number: 10628, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: hydraulic squaring shear Machine weight: approx. 5 t Working area Sheet metal width: 3,000 mm Sheet metal thickness: 4 mm Frame width: 3,300 mm Lodpfo Aa A A Aox Ah Ssru Back gauge: 700 mm Cutting data Stroke rate: 19–50 strokes/min Motor power: 7.5 kW Total power requirement: approx. 10 kW Dimensions Space requirement: approx. 3.7 × 1.5 × 1.9 m EQUIPMENT 2 stop blocks Digital display Illuminated cutting gap Additional bar with a length of 2.6 m

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY Lrjdpfx Aoy Aubush Ssu plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), Year of construction: 2021, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm voltage 400 V total power requirement 1.1 + 2.2 kW weight of the machine ca. 2370 kg range L-W-H 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!) Features: - Electro-hydraulic 4-roll plate bending machine * ??Equipped with a driven top roll and bottom roll * Sturdy welded construction - Application range: * Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls Lredpfx Asz St Rveh Sju - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls (SAE 1050 / CK 45 steel) - Conical bending device - 3-axis digital display for precise roll positioning - Electro-hydraulic drop-end (swing-out bearing) - Operating manual (PDF)

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Ljdpfx Ahe Afby Rj Sjru Diameter of all rollers: 350 mm Hydraulic folding bearing Control panel with digital display Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, This listing is for a Microm EC 350-2 Cryoconsole. The unit is in full working condition and is ready for immediate release. The Microm EC 350-2 cryoconsole is an essential tool for laboratories focused on histology and sample preparation, particularly when working with paraffin-embedded samples. Its advanced design and functionality ensure reliable performance for optimal results. Key Features: Large Cooling Plate: The EC 350-2 is equipped with a spacious cooling plate specifically designed for the solidification and maintenance of samples in paraffin. This feature ensures that samples are uniformly cooled, which is critical for preserving sample integrity. Adjustable Temperature Range: Users can easily set the temperature between 0 and -15ºC, allowing for precise control based on specific sample requirements. This flexibility is crucial for various protocols that may necessitate different cooling conditions. Microprocessor Control: The operations of the cryoconsole are managed through a microprocessor integrated into the paraffin dispenser, ensuring accurate temperature management. This technology helps maintain consistent conditions, minimizing the risk of temperature fluctuations that could affect sample quality. Independent Operation: The EC 350-2 can operate efficiently at its maximum performance of -15ºC without requiring any adjustments. This feature makes it a dependable choice for laboratories that demand stability and reliability in their sample processing. Applications: The Microm EC 350-2 is ideal for: Histology Laboratories: Perfect for preparing tissue samples for sectioning, ensuring that paraffin solidifies correctly for optimal slicing. Research Settings: Supports various experimental protocols requiring precise temperature control during sample preparation. Lredoxxyf Ujpfx Ah Ssu

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW Lodpfx Ahoz Hd R Ie Ssru weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: good (used), Used horizontal boring mill/drilling machine by Cornac Type BS 65 Spindle diameter 65 mm Lsdpfx Ahoz Iarqs Soru Table dimensions approx. 600 x 1000 mm X / Y / Z = 1000 / 800 / 650 mm

Condition: good (used), Offer 26327 Technical specifications: - Length: approx. 2000 mm - Width: approx. 1000 mm - Plate thickness: approx. 170 mm - Table height: 840 mm - 4 height-adjustable support feet Lrsdpfs Ad Hz Rsx Ah Sou - Weight: approx. 1200 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Used PICOT rolling machine Year: 2019 Type: RCS235-30 Lsdpfx Aez D Suveh Soru 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: ready for operation (used), Year of construction: 1996, Picot rolling machine Type RCS 205 – 30 cn Capacity: 6 mm rolling and 4 mm edging Lredpfx Aez Rvlysh Sju CNC controlled Year: 1996 Rollers in very good condition Minimum coil diameter: 266.5 mm (6 mm rolling and 4 mm edging) Maximum coil diameter: 2050 mm (10 mm rolling and 6 mm edging)

Condition: excellent (used), Year of construction: 2013, Granite measuring plate Dimensions: 150 x 140 x 32 cm, weight: 2700 kg Base frame 4 hydraulic buffers Last calibration: 2023 Lrodpjzmidcefx Ah Ssu

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table Lredpfx Ahjzvq Etj Sou - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Ljde Aax Axopfx Ah Seru Total power requirement 83 kW Additional information incl. 15 plates

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Ljdoxn Rhrepfx Ah Seru Weight: 20,000 kg

Condition: used, This listing is for a Sakura Tissue-Tek Tec 5 CM E-2 Cold Plate The Sakura Tissue-Tek TEC 5 CM E-2 Cold Plate is the cryogenic cooling component (cold plate) of the broader Sakura Tissue-Tek TEC 5 tissue embedding system — a key part of histology workflows in pathology and research labs. It’s designed to rapidly cool and solidify paraffin-embedded tissue blocks during processing Typical Use Case This cold plate is used by histology technicians and pathologists to cool paraffin blocks immediately after embedding so that they are firm and stable enough for trimming and sectioning on microtomes — a critical step toward producing high-quality histological slides for diagnosis or research. Lsdpfjxzgzbex Ah Seru

Condition: used, Wall plate with fixed key – reliable anchoring for facade scaffolding Used wall plate with fixed key for securely anchoring facade scaffolding to a building or wall. In combination with a scaffolding tube and coupling, the wall plate provides a stable connection between the scaffolding structure and the facade. Suitable for professional use in scaffolding construction, construction, and rental. Lrjdpj Aawwhjfx Ah Ssu 🔧 Specifications Type: Wall plate with fixed key Material: Galvanized steel Condition: Used Application: Anchoring of facade scaffolding Compatibility: Suitable for standard scaffolding tubes and couplings ✅ Advantages Sturdy and reliable facade anchoring Easy and quick to assemble Robust steel construction Suitable for professional use Cost-effective alternative to new material Application Suitable for safely anchoring facade scaffolding to buildings and walls and for creating a stable connection between the scaffolding and the facade.

Condition: used, each with 38 stations with divider plate suitable for 76 blocks : - dimensions 1 full block per station -> ± 1.070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm Lsdpfj Aa Riqsx Ah Ssru max. thickness blocks 75 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.548 x 1.600 x 1.120 mm 38 blocks weighing ± 20 kg or 76 blocks weighing ± 10 kg ± 1482 kg / Cycle (2h30)

Condition: used, Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Lodpfs Aax Dcsx Ah Seru Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Ljdpez It Skjfx Ah Soru Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: used, floor-plate length:3140 mm floor-plate width:1800 mm floor-plate height:100 mm Lrods Ad Si Hopfx Ah Sju groove width:36 mm no. of flutes:10 flute distance:260 mm weight of the machine ca.:4,1 t dimensions of the machine ca.:3140 x 1800 x 100 m

Condition: used, sheet width 3100 mm plate thickness 6 mm Lredpfx Ahj Aa A Hho Ssu stroke 160 mm rear stop 1000 mm total power requirement 5,5 kW machine weight ab. 6.500 kg

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Serial number: 1403204 Type: Welded plate heat exchanger Material: 1.4404 stainless steel (316L) Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg Lodpfx Ahsz Iubme Sjru The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.