Used Pneumatic Bandfeeder for sale (7,284)

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137 Lasdpozrxnbefx Afwjf

Condition: used, Technical data: - Piston diameter: 50 mm - Stroke: 100 mm Ledpjzrxm Djfx Afwoaf

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Ljdpey S A I Usfx Afwjaf

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Laedezpbqtepfx Afwsf Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg in good condition

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Lsdpfx Afozk Eqmoweaf Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, GE Druck PACE5000 High-Precision Pressure Controller Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device Type: Modular High-Precision Pressure Controller / Pneumatic Pressure Controller Pneumatic Control Module: CM0-B-16G For sale is a used GE Druck PACE5000 High-Precision Pressure Controller. This modular pressure control system was developed for demanding calibration, testing, and automation tasks and is suitable for calibration laboratories, research, development, quality assurance, and industrial test benches. The device impresses with its high control accuracy, fast pressure regulation, and extensive communication interfaces. Technical Data Control Range: -1 to 70 bar(g) Maximum Allowable Working Pressure (MWP): 94 bar Accuracy: up to 0.001% of full scale (model-dependent) Long-Term Stability: up to 0.001% FS Dimensions (W × H × D): approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Pressure Control Modular pressure control system High pressure control speed Automatic pressure regulation Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections Supply Output Vent Reference G1/8" connection Power Supply 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Equipment Pneumatic Control Module CM0-B-16G Color touch display Ethernet interface USB Host / USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pressure connections Power cable Accessories as shown in the pictures Application Areas Calibration laboratory Test benches Quality assurance Automotive industry Aerospace Mechanical engineering Metrology Research and development Automation technology Pressure sensor calibration Shipping Data Dimensions: approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Condition Used The device was last used in an industrial setting. Optical condition as shown in the pictures. Normal wear and tear due to age. Scope of Supply GE Druck PACE5000 Power cable Ljdpfx Aeziyqrjfweaf Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Lsdpfx Afobuqn Hjwoaf Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the all-in-one solution for any application. The display is user-friendly. Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as in other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer from 1 to 240 seconds offer flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone. Lsdpfx Afeziivqswjaf

Year of construction: 1990, condition: good (used), machine/vehicle number: 8988, Offer 22523 Technical data: - Pressing force at 10 bar: 35 kN - Plunger stroke: 12 mm Ledpfx Afjk Rugvoweaf - Outreach: 95 mm - Installation height: approx. 134 mm - Table size: approx. 230 x 190 mm - Air consumption per stroke: 8.0 l - Air inlet pressure: 6 - 10 bar - Space required: approx. W 520 x H 1450 x D 600 mm - Weight: approx. 100 kg - Includes: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN Lajdjzfh Hyepfx Afwef - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Lasdpjyfchgefx Afwef Technical Data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 867011, Offer 25419 Technical data: Ledpfx Afezc Hl Dowsaf - Pressing force approx. 80 kN - Working stroke approx. 50 mm - Power stroke 24 mm - Overhang approx. 150 mm - Table size 300 x 200 mm - Table plate thickness 45 mm - Installation height adjustment up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Overall space requirement approx. W 800 x H 2000 x D 900 mm - Weight approx. 400 kg

Condition: excellent (used), Gericke PTA50 Pneumatic conveying system Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator Lodjy Tbfnspfx Afwsaf

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 2500 mm - Max height of glued elements: 1330 mm - Max thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones – Gluing length of 2500 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Ledpfjzh H Egjx Afweaf

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit Laedjwv Uq Aopfx Afwef - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 160 -Diameter: 160 mm Ledpfx Ajmydmqefwsaf -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 5x gate valve available -Price per piece -Dimensions: 530/220/H150 mm -Weight: 4.5 kg/pc.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 180 -Diameter: 180 mm -Valve drive: 220 V, convertible to 24 V Lajdpfxsmydmuo Afwsf -Nominal pressure: max. 6 bar -Number: 2x gate valve available -Price per piece -Dimensions: 600/250/H140 mm -Weight: 5 kg/pc.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 300 -Diameter: 300 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 1x gate valve available -Price per piece -Dimensions: 850/360/H200 mm Ljdpfx Aemydm Rsfwsaf -Weight: 12,1 kg/pc.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke distance: 570 mm -Piston: Ø 80 mm Lodpfx Asfxrfrjfwoaf -Piston rod: Ø 25 mm/M20x1.5 -Dimensions: 785/95/H95 mm -Weight: 7 kg

Condition: good (used), Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 1400 mm -Piston rod: Ø 15 mm -Recording piston rod: M12 x 1.5 mm -Pressure: max. 12 bar -Dimensions: 1570/50/H50 mm Laedjd Rz Dwspfx Afwof -Weight: 8.1 kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-40-600 PPV-A -Piston: Ø 40 mm -Stroke: 600 mm Laodpod Sti Dsfx Afwjf -Max. Pressure: 10 bar -Price: per piece -Number: 4 pieces -Dimensions: Ø 46 x 800 mm -Weight: 2.15 kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-40-160-PPV-A -Piston: Ø 40 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 325/55/H55 mm -Weight: 1.5 kg Laedod S A U Sspfx Afwjf

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 A 50.0 PTFE VA -Connection: DN50 PN16 -Dimension: 290/103/H260 mm Lodpeigwcyefx Afweaf -Weight: 4.4 kg

Condition: used, Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve, pressure build-up valve Laedpsii Sfuefx Afwsf -Manufacturer: Festo, on-off valve pressure build-up valve orig -Type: HEL-D-MIDI Mat. no. 170691 U643 series -Working pressure: 3 - 16 bar -Dimensions cardboard: 65/55/H130 mm -Weight: 0.5 kg.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter Ø mm -Piston rod: 20 mm (connection M 16 x1.25 thread) -Total length: 230 mm Ledpfx Afsb A S D Hewoaf -Total length extended: 280 mm -Air inlet and outlet: adjustable -Quantity: 3 pieces available Price: per piece -Weight: 1.6 kg/piece