Used Pneumatic Feeder for sale (9,694)

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Todpsz Duhxsfx Al Aoc Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm Todpfxoitdike Al Asc -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020849GA07, bar length: 3,200 mm, bar diameter (min.): 5 mm, bar diameter (max.): 51 mm, Very good IEMCA Boss 551E Bar feeder. The Boss is the bar feeder for long bars which has been sold the most in the world with more than 30,000 installed units. The Boss 551 Easy is an automatic bar feeder suitable for lathes with fixed and mobile headstock. Round bars: 5 – 51 mm Tjdjzlh I Djpfx Al Ajc Hexagonal bars: 5 – 44 mm Square bars 5 - 36 mm Bar length: 3200 mm Max. spindle diameter: 65 mm Remnant length 400 mm Bar changeover time 31 sec. (for bar length 3200 mm) Loader weight: 830 kg Year: 2008

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER Tjdpfx Aoyypb Rol Aoc BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 6151710200, Demo tool with only 2 operating hours: Chicago Pneumatic CP4210AS push riveting machine with short alligator head Take advantage of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Experience the benefits of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Year of manufacture: 2025 Technical specifications: Max. compression force (90 psi/6.2 bar): 13.3 kN Max. piston stroke: 15.9 mm Height: 92 mm Length: 233 mm Todpfx Aoxwu Rcsl Aoc Weight: 1.7 kg Jaw type: Alligator short Main material: Aluminum Max. rivet size aluminum (in): 1/8 Max. rivet size aluminum (mm): 3.2 Max. rivet size steel (in): 3/32 Max. rivet size steel (mm): 2.4 Starting system: Safety lever Air inlet thread size (in): 1/4 Air inlet thread size: NPT Max. working air pressure: 6.3 bar Min. hose diameter (5 m hose length): 0.38 in Min. hose diameter (5 m hose length): 9.5 mm Visit our store; we always have a wide selection of Pneumatic tools for industry and trade in stock.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free Tedpsxwn R Ajfx Al Ajc

Year of construction: 2019, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 19/018, Dosing and bagging scale for solids and powders: Dosing machine for solid and powdered products (from 5 to 1,000 grams of coffee). The product, stored in the buffer hopper, is automatically dosed by a two-speed vibrating channel into a weighing basket. The operator can control the dispensing of the dosed product into the container to be filled. It is possible to prioritize either dosing speed or weighing accuracy. The machine is supplied with various funnels of different diameters for powders or solids. Tedpfxjz Ehm Ro Al Aoc

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Tjdpfx Aov Tbh Rjl Ajc Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Tsdpfx Aevllbrel Ajc Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar All manuals and documentation available

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Shear angle 3 degrees Working pressure 7 to 10 bar Tjdpfx Aszia Nzol Ajc Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Rear guarding Trailing footswitch

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm Tsdoh Tm A Eopfx Al Asc total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: good (used), functionality: fully functional, Net price: 1,100.00 EUR Gross price: 1,309.00 EUR You will receive a proper invoice. Internal article number: 26093 Pneumatic press Schmidt Pressing force: 32 kN Stroke: 100 mm Connection: 220 V Ram holder: D20 mm Table: 300 x 220 mm Todpfx Alsz E N Dwo Aec Hole in table: D50 mm Dimensions (L x W x H): 35 x 60 x 130 cm Weight: approx. 100 kg Fully functional. The pneumatic hoses should be replaced as they are partially porous. You are welcome to inspect the press while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: used, Year of construction: 2019, functionality: fully functional, pressing force: 5 t, stroke length: 60 mm, throat depth: 240 mm, ram plate width: 260 mm, ram plate length: 220 mm, overall weight: 233 kg, Equipment: CE marking, We are offering this used TOX PFHL 056.002.A.060 pneumatic knee-lever press, manufactured in 2019. Type: PFHL 056.002 Serial number: 439487.144 Description: Pneumatic press Maximum pressing force: 57.5 kN Total stroke: 60.0 mm Minimum air pressure: 3 bar Maximum air pressure: 6 bar Weight: 233.0 kg Year of manufacture: 2019 Tjdpfx Aozy Uz Hel Aoc With stroke counter Including tool holders Mobile base frame optionally available (see last image) Condition: see images, mechanically in perfect condition If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Todpfxoyt Hu Ts Al Ajc Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used . More photos and full specifications: /

Condition: ready for operation (used), Year of construction: 2000, SAMSYS MUS 2000 / Bar Feeder Magazine -CE marking -Year of manufacture 2000 Tjdpfez Eqwxjx Al Aoc -Country of origin: Switzerland -Bar diameter: 5 - 80 mm -Bar length: 250 - 1550 mm -Longitudinal movement: 600 mm -Height adjustment: 775 - 1175 mm Dimensions: L x W x H 2.2 x 1.1 x 1.7 meters / Weight 500 kg Subject to errors and omissions.

Condition: used, Year of construction: 2013, operating hours: 11,801 h, functionality: fully functional, total length: 4,500 mm, total width: 1,530 mm, total height: 1,100 mm, overall weight: 1,500 kg, We are offering this used Breuning IRCO SIMAC 50.1 bar feeder, manufactured in 2013. We have a bar loader available: Breuning SIMAG 50.1. It was previously connected to a TWIN 42 machine. Here are some details: Year of manufacture: 12/2013 Operating hours: 11,801.5 hours Accessories: Collets 14, 17, 32, 38, 46 Tjdoztqq Ropfx Al Asc If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Tsdpfx Aov Tbz Del Aoc Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: ready for operation (used), Burger D05 Pneumatic Press Weight: 230 kg Tsdpjz Hya Ejfx Al Ajc Pressing force: 6000 kg Stroke: 39 mm Operating pressure: 6 bar You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and view our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Overhang 130 mm Tedpjz Hv U Sefx Al Aoc Table 200 x 150 mm

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer Todpfx Asvptx Tel Ajc with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Condition: Todpfxjyuuc Ij Al Ajc This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Tedpowd Nthofx Al Aoc Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1 x Bar feeder Iemca CH 220/32 Year of manufacture: 1999 Bar machining diameter: 2 - 20 mm Bar length: 3200 mm Built-in channel: 16 mm Previously used with a CNC long turning lathe Star SA 16 Tsdjz Hpnfepfx Al Ajc The bar feeder can be inspected at our warehouse at any time.

Condition: used, pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. -Speed: 175 rpm -Dimensions: 790/260/H110 mm Tedpfx Alelw Az Ae Aec -Weight: 11 kg

Condition: used, Jürgen Jahn Sorting System SGJ 450 Complete infeed and sorting system enclosed in a high-quality soundproof cabinet, which significantly reduces the noise level in the production facility. Manufacturer: Jürgen Jahn Sorting and Infeed Technology GmbH Cabinet Type: Aluminum profile frame construction Noise Protection: Integrated soundproof cabinet with high-quality convoluted foam lining Accessibility: Maintenance doors with handles for quick access to the sorting technology Overall Dimensions (Cabinet): 1300 mm x 1200 mm (Width x Depth) Component 1: Vibrating spiral conveyor (drive & hopper) Drive Model: SGJ 450 Hopper Diameter: 450 mm Capacity (Volume): 3 dm³ (3 liters) Connection Voltage: 230 V Tjdpfxsz E Rt He Al Aoc Current Consumption: 4 A Operating Frequency: 25 Hz (optimized for heavy metal or stamped parts) Component 2: Linear Conveyor (outfeed section) Rail Model: LFJ 4 Function: Precisely timed buffering and forwarding of the sorted components Connection Voltage: 230 V Current Consumption: 1 A Operating Frequency: 50 Hz Level Monitoring: Integrated optical sensor (manufacturer: ifm) for automatic monitoring of blockages and minimum quantities on the linear rail The system is ideal for the automatic alignment, sorting, and feeding of bulk materials such as stamped parts, screws, brackets, or similar metal and plastic components. The matching control units (control units for hopper 25 Hz / linear rail 50 Hz) can be purchased separately from us. Please contact us if you are interested. "Everything from a single source: We would be happy to offer you a suitable financing solution for your project." More items – new and used – can be found in our shop! International shipping costs on request!