Used Pneumatic Valve for sale (12,466)

Condition: used, Pneumatic tilting roller table 1500x2000x900mm Pneumatically tiltable roller table, stand. Size: 1500 x 200 x 900mm Ibsdpfxouglrzj Ag Nsc The height of the table in the open state: 1850 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Rotary Airlock Valve / Rotary Valve Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge strips Technical data: Ibedpfx Aew Rcp Uog Noc Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Max. volumetric flow: 28,000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. We are happy to answer your questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the stated information or possible errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment required, without warranty or guarantee.

Condition: like new (used), Pneumatic stuffing ingredient pump Maximum allowable usable pressure: 11 bar Raise from plunger by pneumatic piston. Characteristic : 1: pneumatic 2: max 11 bar Ibodpfx Ageiyyxgj Nsc Mark: hopper topper Condition: flawless Dimensions: height + - 190 cm Width +- 200cm Depth +- 90 cm

Condition: excellent (used), Year of construction: 2015, operating hours: 6,233 h, load capacity: 5,000 kg, lifting height: 3,480 mm, free lift: 150 mm, fuel type: electric, mast type: tele-panorama, construction height: 2,580 mm, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 09/2026, fork length: 1,200 mm, Equipment: CE marking, cabin, lighting, sideshift, Operating hours: 6,233 Lifting capacity: 5,000 kg Lifting height: 3,480 mm Ibodpfxowpld Hs Ag Njc Overall height: 2,580 mm Year of manufacture: 2015 Still 5.0 Ton Electric Forklift with full cabin and heater, battery at 89%, like-new Continental tires, telescopic full-visibility mast, fork positioner with side shift, road-legal lighting according to StVZO, single-pedal operation, fork length 1,200 mm, charger included. Ex-works price, including a major service according to STILL manufacturer specifications and a valid FEM (UVV) inspection at the time of sale. Inspection, demonstration, and test drive are available by appointment. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp trailer (transport costs on request). For further information and additional offers, please visit our newly redesigned website.

Condition: excellent (used), functionality: fully functional, CATALOGUE NUMBER 7559 TECHNICAL DATA - loading fields 2 - manually adjustable side clamps 2x4pcs - vertical pneumatic clamps 2x4pcs - max length of glued elements 3300mm - max height of glued elements 1020mm - max thickness of glued elements 100mm - dimensions length/width/height 4270x1600x2000mm - weight about 800kg ADVANTAGES - two working fields - gluing length 3300mm - pneumatic actuators - used press, very good condition Net price: PLN 10900 Net price: EUR 2570 depending on the price EUR 4.25 Ibedpfxev Dirxe Ag Nec (Prices may change with higher fluctuations)

Year of construction: 2008, condition: used, Apple Engineering Ibodpeb Ua E Sofx Ag Noc Four head pneumatic depositor Model: MD Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame

Condition: new, Year of construction: 2025, Valve bag packer including load cells for dosing and packing of bulk material, granulates such as grain, cereals or pellets. AMTEC’S valve bag packing machine fills up to 25kg of the bulk material into valve bags. Dosing of the material by load cells. - Specifications: Weighing range: max. 25 kg; max. speed of machine in neutral: 150 cycles/hour; accuracy: +/- 0.5% FS; compressed air: 4-6bar; current: 380/220V, 3P; product contact parts form SUS 304. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ijdpfx Aev Nm D Ajg Nobc

Condition: used, pressure 5 t throat 150 mm stroke 40 mm no. of strokes 0 - 80 /min distance table/ram, max. stroke up, adjustment up 260 mm table surface area 340 x 270 mm hole in the table 45 mm table height over floor 780 mm table adjustable 120 mm ram surface 60 mm weight 0,3 t dimensions (WxDxH) 0,4 x 0,8 x 1,4 m pneumatic knuckle-joint press permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Iodjvuuk Uopfx Ag Njbc with pneumatic driven knuckle-joint system, speed down adjustable, manual stroke adjustment, adjustable table, foot operation, electro-pneumatic control can be inspected in provisorical running condition in our warehouse (see video)

Condition: ready for operation (used), Schmidt 32-60 pneumatic press Toggle press Brand: Schmidt type: 32-60 Year of construction: 2010 Compressive force: 15 kN min/max operating pressure: 3/6 bar Stroke: 60mm Weight: 45 kg You are welcome to come by for a viewing. Iodpfoqmmbiox Ag Nsbc We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 2017, operating hours: 8,595 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 150 mm, load center: 600 mm, fuel type: diesel, mast type: tele-panorama, construction height: 3,500 mm, DGUV certified until: 08/2026, Equipment: CE marking, air conditioning, cabin, lighting, sideshift, Linde H 50 D-02 - 600 Diesel Forklift with the following specifications: Lifting capacity: 5,000 kg at 600 mm load center Lifting height: 5,000 mm Overall height: 3,500 mm Ijdpfx Agewybz Aj Nobc Year of manufacture: 2017 Operating hours: 8,595 Linde 5.0-ton diesel forklift with full cabin and heating, air conditioning, 4-cylinder engine, telescopic clear view mast, fork positioner with side shift, dual pedal controls, good non-marking tires, fork length 1,200 mm The machines are fully operational. For more information about the machine, feel free to contact us by phone or email. Transport can be arranged with our own low-loader with ramp, but is not included in the offer. Sale is only to businesses. Subject to prior sale, errors, and typing mistakes. More information and offers can be found on our website!

Condition: excellent (used), CATALOGUE NUMBER 6933 TECHNICAL DATA - loading fields 1 - from the front manually adjustable clamping beams 6 pcs - from the top pneumatic pressure beams 4 pcs - length of each pressure beam 795 mm - from the side pneumatic clamps 2 pcs - max length of glued elements 3300 mm - max height of glued elements 1300 mm - max thickness of glued elements 170 mm - dimensions length/width/height 4200x800x1960 mm - weight 820 kg Ibjdpfxsk Uxwws Ag Noc ADVANTAGES - Polish production - mobile - unpainted - used press, very good condition Net price: PLN 23900 Net price: EUR 5620 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: good (used), Manufacturer: Moog Type: D 651-130 Ijdpfexfzczjx Ag Nobc Serial number: P 249

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Max. Capacity: Round: Ø 305 mm Square: 305 × 305 mm Rectangular: 305 × 400 mm Blade: Blade speed: 21, 39, 55, 68, 81 m/min Blade size: 3820 × 41 × 1.1 mm Motors: Blade motor: 3.7 kW Hydraulic motor: 0.2 kW Coolant pump: 0.1 kW Ibsdpfxjxm Rnie Ag Nec OFFER – 29 October 2018 The Pinnacle of Cutting Performance Weight: 800 kg Power supply: 380 V, 3-phase, 50 Hz Space required (L × W × H): 1,905 × 800 × 1,700 mm Working height: 740 mm

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Rotary valve. Type 6-bladed, with drive Ijdpew H Agaefx Ag Nebc -Speed: 3.55 rpm -Drive motor: ABM 0.12 kW -Inlet/outlet: 280 x 1340 mm -Dimensions: 755/1545/H755 mm -Weight: 198 kg

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, Iodpfxova Nq Hj Ag Nsbc - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: good (used), Year of construction: 2014, operating hours: 5,699 h, load capacity: 2,500 kg, lifting height: 3,330 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, construction height: 2,300 mm, battery voltage: 80 V, DGUV certified until: 09/2026, fork length: 1,200 mm, Equipment: CE marking, lighting, sideshift, Jungheinrich EFG 425 Electric Forklift with the following specifications: Operating hours: 5,699 Lifting capacity: 2,500 kg Lift height: 3,330 mm Overall height: 2,300 mm Year of manufacture: 2014 Jungheinrich 2.5-ton electric forklift with open cabin and windscreen, good battery, new tires front and rear, duplex mast with full free lift, side shifter, joystick control, 4th valve, fork length 1,200 mm, charger available on request. Includes service and valid safety inspection (UVV test). Inspection, demonstration, and test drive available by telephone appointment. Sale to commercial customers only. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs upon request). Isdowzg R Ejpfx Ag Nobc For further information and offers, please visit our newly redesigned website.

Year of construction: 2016, condition: new, functionality: fully functional, NY Model: D920-143 Year: 2016 Ijdpfxeufxvde Ag Nobc R16KB910HXYX

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm Ibsdpfx Agerx Tats Noc - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: VAR1001122X, total length: 418 mm, total width: 426 mm, 2x wam diverter valve (can be sold separately), good as new: pipe diameter : 102mm installation size : 418mm Iedpfjudxagox Ag Nsbc descending line : 30 product contact : stainless steel exterior : aluminium Stand detector EX (atex) certified Dimensions : enclosure

Year of construction: 2000, condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor Ibjdow Hzx Uopfx Ag Nsc -Rotary valve. Type JK-S w/ 6 blades, with drive -Speed: 19 rpm -Drive motor: KEB 0.55 kW -Inlet/outlet: 220 x 1500 mm -Dimensions: 340/1970/H305 mm -Weight: 113 kg

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Isdpjwqx H Rsfx Ag Nobc Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: ready for operation (used), Schmidt 33-156-01 Toggle Press PressControl 500 Pressing force: 15 kN Stroke: 40 mm Overrun time: 0.07 sec Overrun distance: 15 mm Ibedpoxcn Apsfx Ag Nec PressControl 500 Two-hand operation You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, the conveying of wood pellets (such as pellet, sawdust), plastic granules, sand, abrasive powders (including even corundum), and steel fibre reinforcement for concrete mixers or within batching facilities, among others. Our systems can also be used for aerating a variety of materials, including hay, cereals, herbs, and more. They are ideal for providing fresh air to production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and hazardous welding fumes. Flexible hose systems can also be used as needed. Key specifications: - High performance blower with 5.5 kW/400V motor - Robust, modular steel construction; pipes and bends made from 3.6 mm thick steel, enabling transport of even the most challenging materials while ensuring long service life - We also supply light and heavy flexible hoses for the above-mentioned materials - Easily transports material over long distances (distance depends on the material type) - High blower output ensures capability for both horizontal and vertical transport - Extensive experience in production, with machine segments bolted with M8 screws for easy replacement and versatile use On request, we can produce parts or the entire unit in a STAINLESS STEEL version (including pipes), or in galvanized finish. We apply the Kaizen method in production—Kaizen, meaning 'change for the better', is a management philosophy emphasizing continuous process and operational improvement. REPLIES ARE BEST SENT VIA E-MAIL In the standard version we sell only the blower with a flanged outlet to accommodate various pipe connections. We manufacture pipes and bends from 3.6 mm thick steel. Impeller speed: 2,800 rpm. (OPTION: with extensive electronic speed regulation, available from stock). The use of three-phase motor speed controllers offers multiple benefits, including energy savings, precise torque control, and improved overall system efficiency. Additionally, they reduce energy losses, positively impacting production performance. Our blowers are highly efficient. The machine is built from easily replaceable modular segments (joined by M8 bolts), which we always keep in stock, enabling versatile applications. All individual modules are also available separately (e.g., the blower only). We can adapt the construction to meet customer requirements. The blower is easy to transport—one person can easily move it, and it can be transported even by a small car, van, or trailer. Assembly and operation are straightforward. We also produce optional wheels to facilitate moving the unit (two types available). Net prices: - Basic set (without electronic speed control): 10,300 PLN (EUR 2,453) - With electronic speed control: 13,400 PLN (EUR 3,190) - Blower only, without feed hopper: 10,300 PLN (EUR 2,452) - Galvanized air splitter (2 pipe inlets/outlets, with flanges and fixing holes): 1,900 PLN (EUR 452) - Galvanized air splitter (3 pipe inlets/outlets, with flanges and fixing holes): 2,400 PLN (EUR 571) - Additional wide-range electronic speed controller: 2,900 PLN (EUR 690) Iodpfxsw Aqamj Ag Nsbc For more information, please contact us by e-mail. We operate 24/7.

Condition: good (used), Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine Isdpfx Ageqku Nus Nobc -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/pc.

Year of construction: 2012, condition: good (used), Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Handover: in the current condition as seen -Maintenance unit: incomplete, see photos -Manufacturer: Festo, maintenance unit from CNC machining center Santenberg GTC S 2 -Type: D-MIDI BD43 BO43 Individual components see photos Iedpfsi Sdg Dsx Ag Nebc -Pressure: max. 16/12 bar -Dimension: 530/105/H270 mm -Weight: 4.9 kg