Used Portable Sawmill for sale (1,297)

Condition: excellent (used), Year of construction: 2017, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2017 CIMC 20FT ISO Tank Container Nedpfx Aoykrl Esfaocn 25,040 L L4BN T12 Steam heating Bottom discharge Design temperature: -40/+130°C 2.5Y TEST/CSC valid until 03-2027 = Further Information = General Information Year of manufacture: July 2017 Model year: 2017 Weights Empty weight: 3,660 kg Payload: 32,340 kg Gross weight: 36,000 kg Functional Cargo compartment capacity: 25,000 l Body make: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2017, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2017 CIMC 20FT ISO Tank Container 25,010L 22K2 Nodpfxsykq Uxo Afascn L4BN T11 Steam heating Bottom discharge Design temperature: -40/+130°C 2.5Y TEST/CSC valid until 07-2027 = Further Information = General Information Year of manufacture: June 2017 Model year: 2017 Weights Tare weight: 3,660 kg Payload: 32,340 kg Gross weight: 36,000 kg Functional Loading capacity: 25,000 L Body make: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2017, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2017 CIMC 20FT ISO Tank Container 25,030L Ncedpfx Afeykqr Deaen 22K2 L4BN T11 Steam heating Bottom discharge Design temperature: -40/+130 °C 2.5Y TEST/CSC valid until 11-2027 = Further Information = General Information Year of manufacture: June 2017 Model year: 2017 Weights Empty weight: 3,660 kg Payload: 32,340 kg gross weight: 36,000 kg Functional Cargo capacity: 25,000 l Body make: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Additional Information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. Ncsdoylkl Tjpfx Afaen • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Technical Specification Taper Size SK 40

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement Ncjdpfsymlhrox Afaon - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with a Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw measuring arm for manual tool measurement • Ball screw with enhanced precision, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for particularly large workpieces • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tool capability • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency stop impact switch greatly simplifies program setup • Belt-style chip conveyor • Worklight for complete illumination of the work area • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic turret head VDI 40 • All 12 turret stations powered by an integrated motor capable of speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree inclination • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with the door open • Functional safety also protects against high costs! Ncsdeymk Ukspfx Afaen Complete Package • Safety Integrated • Remnant detection and machining • ShopMill step programming • Manage network drives • 3D simulation • Remote view/assistance SIEMENS OSS Plus Additional Package • 12 months; Item no. 3589020 • 24 months; Item no. 3589021 • 36 months; Item no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (factory option) Angular accuracy: 51 '' Repeatability: 20 '' Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed Range Speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle nose: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle taper: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical Spindle Drive motor power S1 continuous duty: 11 kW Drive motor power S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30%: 140 Nm Feed Force Feed force, X-axis: 8.4 kN Feed force, Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN 5480 Number of tool stations: 12 Drive motor power: 4.82 kW Max. permissible speed at tool coupling: 6000 rpm Max. tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Ncjdpfsymkkfox Afaon Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations Nsdpfx Afjymkdxjaecn • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life. • Machine base constructed from cast iron for high rigidity • Carousel-type tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier • Coolant system with 70-liter coolant tank • Tool change performed automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, high-precision milling table – large dimensions and precision ground finish • Generously dimensioned access doors minimize cleaning and maintenance time • LED machine light for complete illumination of the working area SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front USB port (IP65) • Serial RS232C interface • RJ45 Ethernet on rear panel User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process reliability: • LED tool number display • MCP with rotary switch for feed and spindle override Complete package: • RJ45 Ethernet port • Prepared for remote maintenance • AST function; allows simple optimization for enhanced dynamic and accuracy requirements • Absolute encoder / no reference run necessary • Higher precision Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid traverse speed X axis: 20 m/min Y axis: 20 m/min Z axis: 20 m/min Electrical Data Ncodpfx Afoymkcusaon Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 12 kVA Horizontal Milling Table Length: 800 mm Width: 260 mm Distance vertical spindle – table, min.: 100 mm Distance vertical spindle – table, max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 T-slot spacing: 50 mm Maximum load capacity: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant/Lubricant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel X axis (automatic): 450 mm Y axis (automatic): 260 mm Z axis (automatic): 450 mm Max. spindle–column distance: 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation Drive motor power S1 (continuous duty): 3.7 kW Drive motor power S6-30% duty cycle: 5.5 kW Drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X axis S1: 6 Nm Y axis S1: 6 Nm Z axis S1: 11 Nm Tool Changer Design: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Njdpfxoymkbkj Afascn Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles Nsdpfxjymkbde Afajcn • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Nedpfx Aoymka Hefaocn Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F200 ECO Premium CNC Milling Machine—direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Drive motor torque S1 operation: 57 Nm Ncedpfx Afsymd Nbsajn Drive motor S6 30% operation: 17.1 kW Drive motor torque S6 30% operation: 118 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Flushing pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid feed, X-/Y-/Z-axis: 48 / 48 / 48 m/min Motor Torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed Forces X / Y / Z-axis: 5,34 kN / 5,34 kN / 6,68 kN Speed Range Spindle speed*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 650 mm Table length × width: 1000 × 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Maximum load capacity: 500 kg Dimensions Length × width × height: 2,400 × 2,355 × 2,860 mm Total weight: 5,500 kg Equipment • Linear guides with ball screw for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 port and 230 V power outlet • Machine lamp in work area • Cleaning blow gun • Ball screws and linear guides from THK • Chip flushing system • Cooling at the spindle head (machining area) • Control cabinet • Arm-type tool changer • SW24 • CE compliant *More options available

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min Ncodpfjvw Du Usx Afajn vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: as good as new (ex-display), Year of construction: 2025, Machine currently on display. Optimill F 300 HSC Premium CNC milling machine, direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control features outstanding performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with roller recirculation on all axes for high load capacity • High-torque servo drives directly coupled to the ball screws in all three axes • Precision-ground, preloaded high-performance ball screws for rapid traverse speeds on all axes Nodpfxjymd Epe Afascn • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm, inline spindle • Solid, precision-ground milling table with five T-slots, generously dimensioned • Portable electronic handwheel with enabling switch and emergency stop impact switch significantly simplifies program setup • Automatic tool changer with double-arm gripper, 30 tool stations • Coolant unit with chip flushing system and cleaning gun • Through-spindle coolant 20 bar • Belt-type chip conveyor ensures efficient chip removal • Chip cart • Oil separator • Machine light in working area • Additional SIEMENS warranty package and free online/on-site service (OSS Plus) • 1 year basic maintenance contract included for Germany, Austria, Switzerland • Control unit • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remainder material detection and processing • ShopMill operation step programming • Network drive management • 3-D simulation • Program tracing • Additional Siemens OSS PLUS package • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Equipment details • Inline spindle • SK 40 / DIN 69871 spindle taper • Spindle speed 15,000 rpm Dimensions and weight • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA Milling table (horizontal) • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Maximum load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis (automatic) 1000 mm • Y-axis (automatic) 620 mm • Z-axis (automatic) 630 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Continuous operation motor power (S1) 20 kW • Motor power (S6-30% duty cycle): 52.4 kW • Continuous torque (S1): 96 Nm • Torque at 30% duty cycle (S6): 250 Nm Feed force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 12.01 kN Feed drive torque • X-axis continuous operation (S1): 20 Nm • Y-axis continuous operation (S1): 20 Nm • Z-axis continuous operation (S1): 36 Nm Tool changer • Double-arm gripper • Number of tool stations: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 seconds

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 E CNC milling machine direct from the manufacturer. F 150 E - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. Carousel tool changer with 16 tool positions All linear guides with stainless steel covers Automatic central lubrication Siemens main spindle motor Servo drive from SIEMENS in all axes (closed control loop) Chip conveyor in belt design ensures efficient chip removal Chip trolley Max. Spindle speed 10,000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Coolant system with 190 liter coolant tank Tools are changed automatically or at the touch of a button Solid, exact milling table, large dimensions and precise surface finish Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Thanks to its technology-specific features, the SINUMERIK 808D ADVANCED control is perfectly preconfigured for milling. Thanks to the hardware and software extensions, the SINUMERIK 808D ADVANCED also offers sufficient performance for simple milling functions in mold and tool making. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function; enables simple optimization for higher dynamic and accuracy requirements Absolute encoder / no reference run required Higher accuracy Njdpfeymdygox Afajcn Travel distance: X=750mm Y=500mm Z=500mm Dimensions and weights Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling/milling capacity Cutter head size max. 80 mm End mill size max. 38 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 15 kW Horizontal milling table Length 900 mm Width 500 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 600 mm T-slots size 18 mm Number of T-slots 5 T-slot spacing 80 mm Load capacity max. 350 kg Accuracy Repeat accuracy ±0.005 mm Positioning accuracy ±0.01 mm

Year of construction: 2024, condition: excellent (used), functionality: fully functional, laser power: 200 W, laser wavelength: 1,064 nm, machine/vehicle number: 202404170, laser type: fiber laser, laser source manufacturer: JPT, 200 w pulsed laser cleaning machine. DMK CL-2-H-200. Made by Demark. China. Air cooled. Portable. Only 24kg. Laser handheld head weighs only 1.3 kg. Ncodpfxsxbh U Aj Afajn Extended fibre cable to 7m. Single phase 220v. Comes with extras 1x field mirror F254 50x protective lenses. 1xpowerful metal fan to redirect fumes 1xair compressor. It connects onto machine to create air flow cushion to protect optics inside cleaning head. 3x pairs of protective eye wear. Great for rust and oxidation removing in hard to reach places where media blasting can not reach . I used it only on a few jobs for a couple of months. Not viable to keep it any longer as I live in the rural areas where demand for such tech is low. Businesses center are too far.

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Njdpfx Afov Dauwoaecn Storage location: Nattheim

Condition: excellent (used), Year of construction: 2017, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, In very good condition 20FT ISO Tank Container for FOOD 25,910L / 1-compartment L4BN T11, UN PORTABLE Steam heating Bottom discharge Design temperature: -40 to +130°C Valid 5-year & CSC test until: 09/2027 Multiple units available Nsdsyh Ndqspfx Afajcn = Further Information = General information Year of manufacture: Sept. 2017 Model year: 2017 Weights Unladen weight: 3,710 kg Payload: 32,290 kg Gross weight: 36,000 kg Functional Tank capacity: 25,000 l Body manufacturer/brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information For more information, please contact Arne Honingh.

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 170 mm, spindle motor power: 15,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3s SCM M400F wood mill was manufactured in 2018. It features a modular CNC design with a multifunction worktable, ensuring high-quality machining. The machine boasts remarkable performance with a mobile gantry structure and intuitive programming via Maestro CNC software. It offers a maximum spindle speed of 24,000 RPM and a tool magazine capacity of 36 positions. If you are looking to get high-quality milling capabilities, consider the SCM M400F machine we have for sale. Contact us for further details. • Panel clearance in Z: 170 mm • Workpiece length in dual-station mode: 1650 mm • Axes speeds: vector speed X–Y 85 m/min; Z 30 m/min • Tool magazine: up to 36 positions Nedpjyi Drbjfx Afaecn • Drilling unit: 25 independent vertical spindles; up to 12 independent horizontal spindles; max 8,000 rpm • Integrated blades: X-axis blade Ø125 mm; tilting blade 0–90° Ø160 mm • Operations: vertical drilling on panel surface; horizontal drilling on all 4 sides; disc cutter milling; 3/4/5-axis milling • 5-axis operator unit: “Prisma” • CNC/Software: Maestro CNC (“Xilog Maestro”) Additional equipment • Automated cell version available with loading lift and unloading conveyor belt (optional/subject to configuration)

Year of construction: 1990, condition: ready for operation (used), overall weight: 5,000 kg, total width: 1,500 mm, total height: 2,000 mm, product length (max.): 3,000 mm, spindle speed (max.): 20,000 rpm, This wood mill was manufactured in 1990. Consider the opportunity to buy this ROBLAND Tischfräse wood mill. Contact us for further details. Ncedpfxoyi A Tks Afaon

Condition: used, mileage: 39,440 km, power: 125 kW (169.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,272 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1170. P653045 ----EQUIPMENT * Smartphone storage including wireless charging * Storage above roof lining * Rear door step * Electrically folding exterior mirrors * Exterior mirrors without indicators * Seats: Two-seater passenger seat * Front side indicators * Active Brake Assist * Ceiling light in cargo/passenger compartment - with door contact * Anti-theft alarm and intrusion alarm system * Digital owner's manual * Entry handle on rear left corner pillar * Electrical system for trailer socket in conjunction with 14 V/250 A generator * Chassis stabilization level I * Misfueling protection * Seat belt warning system for passenger seat * Grab handle for driver and passenger entry * 93-liter main tank * Wooden floor (cargo area) * Interior trim in cargo area up to roof height - wood * Hinged lid for storage compartment * Tempmatic air conditioning system * Comfort overhead control panel * Seats: Comfort driver's seat * Cargo area lighting via motion detector * Load securing: Tie-down rails on the side wall and roof frame * Load anchoring rail system * Cable duct on the rear portal * Cable duct on the side wall * Navigation accessories: Live Traffic Information * MBUX multimedia system with 7-inch touchscreen. High-resolution 7-inch touchscreen (960 x 540 pixels). AM/FM radio with dual tuner. Bluetooth connectivity with audio streaming and hands-free function. Smartphone integration via Android Auto or Apple CarPlay. Multimedia connection unit for connecting portable devices via a USB-C interface. 4 x 25 W output power, tone adjustment, separate volume settings for audio and phone. 2-way speakers at the front. * Marker lights, side. * Steering wheel: Multifunction steering wheel * Navigation voice control: LINGUATRONIC Wi-Fi hotspot. Multimedia connection unit for connecting portable devices via an additional USB-C interface. Center-fill speakers for improved sound and voice output. Improved hands-free function. Dual-phone operation Digital owner's manual * Navigation: 3 years of free map updates * Fog lights with cornering lights * Acoustic package * Instrument panel charging package The charging package expands the charging options in the cockpit with two 5V USB-C ports and a 12V socket. One USB port and the 12V socket are installed in the center storage compartment of the instrument panel, and another USB port is located in the lower section of the center console. This allows charging of electrical devices such as mobile phones within easy reach of the driver and front passenger. * Package: Parking package with 360° camera, Parking Assistant, Rear Cross Traffic Alert, Drive Away Assist * Radio: Digital DAB radio * Wheel arch loading * Double rear door, opening to the side wall * Vibration damper * Heated driver's side seat * Heated passenger seat (2-seater) Ncsdpjwapvbjfx Afaon * Power socket in passenger compartment * Cruise control * 5 V USB socket * Load securing: Tie-down rails on side wall on parapet belt * Front axle with increased load capacity * Electrical pre-installation, configurable special module * Elimination of vehicle lowering * Long-range nozzles in instrument panel * ADAPTIVE ESP * Storage above windshield * Storage compartment under cockpit * Rear towing eye * Axle ratio i = 3.923 * Driver's side airbag * Electric adjustable and heated exterior mirrors * Outside temperature display * Hill start assist * Third brake light * Adaptive brake lights * DPF, SCR * Tachometer * Entry handle on r

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Nedexqgy Nspfx Afajcn Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, mileage: 43,570 km, power: 110 kW (149.56 HP), first registration: 03/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,638 mm, loading space length: 3,273 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal Number: 1300. P474509 ----EQUIPMENT * ATTENTION ASSIST * Storage above windshield * Active Distance Assist DISTRONIC * Passenger-side airbag * Airbag: Thorax bag, pelvis bag, and side bag for front passenger * Airbag: Thorax bag, pelvis bag, and side bag for driver in V-shape with single-pole battery main switch * Active Lane Keeping Assist * Acoustic Package in conjunction with MBUX * Engine oil level indicator during cold start * Rear door step * Electrically adjustable and heated exterior mirrors, left and right * Electrically folding exterior mirrors * Exterior mirrors without indicators * Single-pole battery main switch * Front side indicators * Active Brake Assist * Ceiling light in cargo/passenger compartment - with door contact * Anti-theft alarm and intrusion alarm system * Digital Owner's Manual * Entry handle on rear right corner pillar * Electrics for trailer socket * Chassis stabilization level I * Vehicle preparation for a trailer load of up to 2000 kg * Brakes: Electric parking brake * 14 V/220 A generator in conjunction with roof air conditioning * Speed limiter 120 km/h * Seat belt reminder for front passenger seat * Grab handle for driver and front passenger entry * Folding lid for storage compartment * Terminal block for electrical connections on the driver's seat base * Tempmatic air conditioning * Instrument cluster with color display * Instrument cluster with color display in V with Brake/Traffic Sign/Distance Assist/MBUX * Comfort roof control panel * LED high-performance headlights * LED light strip in the cargo area * Cargo area lighting via motion detector * Leather-wrapped steering wheel * Cable duct on the rear portal * Cable duct on the side panel * Steering wheel with adjustable tilt and height * Navigation accessories: Live Traffic Information * MBUX multimedia system with 7-inch high-resolution touchscreen 7-inch touchscreen (960 x 540 pixels) AM/FM radio with dual tuner Bluetooth connectivity with audio streaming and hands-free function Smartphone integration via Android Auto or Apple CarPlay Multimedia connection unit for connecting portable devices via a USB-C interface 4 x 25 W output power, tone adjustment, separate volume settings for audio and phone 2-way speakers at the front * Marker lights, side * Steering wheel: Multifunction steering wheel * Navigation Voice control LINGUATRONIC Wi-Fi hotspot Multimedia connection unit for connecting portable devices via an additional USB-C interface Center-fill speaker for improved sound and voice output - improved hands-free function Two-phone operation Digital owner's manual * Navigation: 3 years of free map data updates * Halogen fog lights * Package: Parking package with 360° camera Parking assistant Rear Cross Traffic Alert Drive Away Assist * Configurable special module Ncodpoykx Aqsfx Afasn * Radio: Digital radio DAB * Rain sensor * Tire pressure monitoring - on front and rear axle (wireless) * Spare tire holder under the frame end * Reversing alarm * Double rear door, opening to the side wall * Key: multi-button remote control * Orange seat belts, driver and front passenger * Seats: Driver's seat plus * 5 V USB socket * Blind spot assist * VIN visible from the outside * Traffic sign assist * Switch panel preparation * Heat-insulating glass with band filter on the windshield * Additional rear door lock at 90 degrees * ADAPTIVE ESP * Driver's side airbag * Outside temperature display * Hill start assist * Third brake light * Adapti

Condition: excellent (used), functionality: fully functional, power: 72 kW (97.89 HP), fuel type: diesel, overall weight: 5,200 kg, operation weight: 5,200 kg, axle configuration: 4x4, first registration: 02/2011, Year of construction: 2011, operating hours: 10,247 h, Equipment: hammer hydraulics, hydraulics, Hansa APZ 531/SW/Cemetery Excavator/All-Wheel Drive/Tele Arm • Manufacturer: Hansa • Model: APZ 531 • Year of manufacture: 2011 • Operating hours (current): 10,247 hrs • Power: 72 kW / 97 hp • Drive configuration: 4X4 • Earth grabber 760 mm x 900 mm with 9 teeth • Telescopic arm • All outriggers adjustable horizontally and vertically • Rear right outrigger telescopically extendable • Hydraulic breaker circuit • Trailer hydraulics • Trailer hitch for unbraked trailers • Jaw- and ball-type trailer coupling • Hydraulic telescopic boom • Quick coupler • Radio Ncsdpox Higyjfx Afaon • 40 km/h road approval • Gross weight: 5,200 kg • Excellent condition • German machine • Ready for immediate operation • Sale according to §25A (no VAT can be disclosed) • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions (GTC).