Used Positioning for sale (7,877)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-axis travel without edge banding: 6,000 mm X-axis travel with edge banding: 5,000 mm Y-axis travel: 1,300 mm Casdpfox Af Ivox Aflsa Y-axis travel with main spindle + tool diameter 20 mm: 1,630 mm Y-axis travel with edge banding: 1,450 mm Setup table: Dyna Poin BIMA 410 V Occupancy: 4 positions Edge banding unit: available

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Casdoxyi Ihopfx Aflja Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 Cjdpfx Afjx A Tzqeljaa 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter: 190 mm, spindle speed (max.): 5,500 rpm, controller model: FANUC 18i-TB, Equipment: bar feeder, TECHNICAL DETAILS Turning diameter: 190 mm Spindle speed: max. 5,500 rpm Power: 7.5 kW Number of tool magazine positions: 12 MACHINE DETAILS Control: FANUC 18i-TB EQUIPMENT 2 turrets Cajdpfx Aexz Audsflja Y1000 Counter spindle Bar feeder IEMCA BOSS 545E Conveyor belt 5 driven tools 9 standard tools

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Caedox An Uxepfx Aflsa Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Codox A Hagjpfx Aflsaa Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FML14BE06, travel distance X-axis: 850 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, The machine is completely unused! TECHNICAL DETAILS X travel: 850 mm Y travel: 530 mm Z travel: 510 mm Spindle speed max.: 10,000 rpm Spindle speed min.: 150 rpm Distance spindle nose to table: 150–660 mm Distance spindle center to column: 585 mm Spindle diameter: 70 mm Table Table size: 1,000 × 510 mm Number and size of T-slots: 5 × 18 mm Table load capacity: 500 kg Feeds Rapid traverse X/Y/Z: 36 / 36 / 24 m/min Working feed: 1–10 m/min Accuracy Positioning accuracy: 0.01 mm Repeatability: 0.007 mm Tool Changer Casdpfx Afex Ar Ucoloa Tool capacity (arm type): 24 tools Tool shank: BT40 Tool change time (T-T): 2.0 s Drawbar: P40T-1 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Dimensions & Weight Footprint (W × D × H): 2,430 × 2,115 × 2,813 mm Machine weight: 5,800 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Caodpfx Aexzfx Eeflsa Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, overall weight: 9,000 kg, operating hours of spindle: 85,355 h, MACHINE DETAILS Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine with 60 tool positions: 600 kg Footprint: 4.50 m × 2.72 m × 2.63 m Cedjx A Umnjpfx Aflsaa Electrical Data Rated power: 44 kVA Current consumption: max. 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Caedpox Di Uiofx Afloa Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Table Table dimensions: 3,800 x 1,000 mm Spindle Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Positions: 40 Csdpfox Aph Hox Afloaa CNC control Model: SELCA S 4045 PDH MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: Q0EC156, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: Fanuc 0i MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 450 mm Travel Y: 300 mm Travel Z: 300 mm Tool changer: 12-position Spindle taper: BT30 Spindle speed: 10,000 rpm MACHINE DETAILS Cajdpfex Agtyjx Afloa Controller: Fanuc 0i MD EQUIPMENT Various tool holders Operating manual

Condition: excellent (used), Year of construction: 2023, overall weight: 1,550 kg, 2023 DMG Mori Automation PH 150 Automatic 4 Position Pallet Handling System With 6 Erowa Pallets Pallet Dimension 500 x 500mm. Maximum Pallet Weight 250kg. Maximum Weight Per Level 1,500kg. Axis Travel 'X'=2,170mm, 'Z'=75mm, 'C'=360°. Rated Acceleration 'X'=200mm/s², 'Z'=800mm/s², 'C'=20°/s². Trigger 'X'=3,000mm/s², 'Z'=1,600mm/s², 'C'=150°/s². Maximum Speed 'X'=500mm/s², 'Z'=500mm/s², 'C'=50°/s². Voltage 400V. S/No. 7717000254A. Casdpfxsx Aicdj Aflea With 6 Erowa Pallets, Signal Tower, Guarding Transport Brackets, Lifting Shackles & Manuals, Overall Dimensions L1,849 x W1,710 x H2,324mm. Weight 1,550kg.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3275, Handling concept 2, consisting of Lift table, Section bridging by roller conveyor Vacuum arm for positioning material Pneumatically lowerable stop fences Push off device Dust extraction hood for protective boards Dust extraction channel at outfeed from below Transport belt 4050 x 2250mm 14-position tool changer Simultaneous push off and infeed Table Length: 3100mm Cajdpfx Ajx Ap Akjfloa Table Width: 2250mm Thickness: 100mm X/Y: 96m/min Z: 20m/min 3 Vacuum pumps with a total vacuum capacity 900/1080m3/h 4 Pneumatically lowerable stops 9Kw main spindle – liquid cooled Aggregate interface main spindle c-axis Flex 5 interface for c-axis Ait Jet integrated in extraction hood 12 vertical drilling spindles, including quick-change system Grooving saw swivelling 90 degrees Tool Change Assistance Device Tool length Control PowerTouch with power control hardware CE Weeke Quality Pack Energy Saving Mode

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement Caedpfjxxng Tjx Aflea X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, total width: 600 mm, total length: 4,700 mm, load capacity: 400 kg, The FRB-P5 scissor roller conveyor from TecMaschin is the optimal solution for an inexpensive entry into goods transport without a drive. It is ideal for spaces where space is limited or fixed conveyor lines cannot be installed and allows customisation according to your needs. The roller conveyor can be extended up to 4.700 mm. In addition, curves can also be formed, flexibly guiding the goods to be transported to the desired loading position effortlessly and with minimum effort. Thanks to the height-adjustable feet (700 - 1.000 mm), the inclination of the roller conveyor can be adjusted quickly and easily, enabling parcels to be transported even on sloping or stepped surfaces. This also facilitates the unloading and loading of transport vehicles, as differences in height can be easily overcome. In addition, handling is particularly uncomplicated and flexible thanks to the small dimensions (1.920 - 4.700 mm x 750 mm x 700 mm) when pushed together and the swivel castors and brakes. The retractable handle at one end of the roller track further simplifies handling. The castors made of durable ABS are particularly light compared to steel castors, which means that the roller track only weighs 97 kg. The FRB-P5 can be loaded with a maximum of 40 kg/m². Application scenarios Caedpfxex Dca Ss Aflsa The roller conveyor FRB-P5 can be used flexibly in many application areas in a wide range of industries, such as parcel and courier services, mail order and the packaging industry. Optimally suited for loading and unloading trucks and swap bodies or as relief routes at peak times and for emergency scenarios. Info: To ensure the best possible transport, goods should rest on at least 3 support rollers and have a smooth floor. Ships on a treble UK pallet. Shipping is not included.

Condition: used, Year of construction: 2009, Goodway GS2600YS CNC Turning Centre with Fanuc Series 18i - TB CNC Control, Twin Spindle, 12 Position Tool Turret, Spindle Speeds 4000rpm, AR Filtrazioni Oil Mist Extractor, Machine Weight 6500kg. S/No. 94E046 (2009) Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Cjdpfx Afoxztnbeljaa

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14599631, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, The tool measurement system and the touch probe were retrofitted in 2022 for a total of EUR 15,000. The machine is prepared for 4th and 5th axis operation! TECHNICAL DETAILS Travel X: 500 mm Travel Y: 350 mm Travel Z: 610 mm Spindle speed: 18,000 rpm Spindle taper: SK30 Tool changer: 24 positions MACHINE DETAILS Operating hours Program run: 13,613 h Machine on-time: 39,034 h Control on-time: 38,758 h EQUIPMENT Connection and drives for 4th/5th axis Caedox Agp Ijpfx Aflja 3D touch probe Heidenhain TS642 Tool measurement Heidenhain TT140 Spindle chiller unit Heidenhain HR410 electronic handwheel Approx. 30 tool holders Collets Complete documentation 3D touch probe

Condition: excellent (used), Year of construction: 2018, Heller H6000 CNC Twin Pallet Horizontal Machining Centre With Siemens 840D sl Control Cjdpfsx Aia Aex Afljaa Pallet Dimension 630 x 630mm. Maximum Pallet Mass 1,000kg. Maximum Workpiece Height 1,200mm. Axis Travel 'X'=1,000mm, 'Y'=1,000mm, 'Z'=1,000mm, 'B'=360° (0.001° Increments). Rapid Traverses 'X'=50,000mm/min, 'Y'=50,000mm/min, 'Z'=75,000mm/min, 'B'=25rpm. Feed Thrusts 'X' And 'Y'-axis With Duty Cycle = 40% 15,000N, 'Z' Axis With Duty Cycle = 40 % 20,000N. Spindle Speed Range 5-6,000rpm. Drive Power At Duty Cycle S6 40% 60kW, Maximum Torque At Duty Cycle S6-40% 2,292Nm. 50 Position ATC. Spindle Taper HSK 100A. Maximum Tool Ø280mm, Maximum Tool Length 600mm, Maximum Tool Mass 25kg. S/No. MA56338 (2018). With Absolute Measuring Scales 'X', 'Y' & 'Z', Baluff Tool Chip Reader, Renishaw Spindle Probe Interface, Knoll Through Spindle Coolant System, Knoll Chip Conveyor, LTA Industrial Cleaning Mist Extraction Unit, Signal Tower, Foot Switches, Handwheel & Manuals. Overall Dimensions L7,650 x W3,500 x H4,300mm. Weight 13,500kg.

Condition: ready for operation (used), Year of construction: 1998, Main Drive Cedpfx Asxxngyefljaa Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2013, Doosan Puma 480 Turning Centre with Fanuc Series 32i - Model A CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 10 Position Tool Turret, Tailstock, LNS Swarf Conveyor, Filtermist FX6002 Oil Mist Filter Extractor, Machine Weight 10100kg. S/No. ML0144-000404 (2013) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Csdpfoxztl Hox Aflsaa Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Mazak Super Quick Turn 200 MSY CNC Twin Spindle Multitasking Slant Bed Lathe With Mazatrol 640 T Control & Barfeeder Kitagawa B-208 3 Jaw Power Chuck, Sub Spindle Collet Chuck. Maximum Swing Ø525mm. Maximum Swing Over Carriage Ø350mm. Standard Machining Ø276mm. Standard Machining Ø300mm. Maximum Machining Length 541mm. Bar Working Capacity Ø51mm. Through Spindle Bore Ø51mm. Axis Travel 'X'=180mm, 'Z'=575mm, 'Y'=100mm (±50mm), 'B'=585mm, 'C'=Increment 0.001°. Rapid Traverse 'X'=30m/min, 'Z'=30m/min, 'Y'=12m/min, 'B'=18m/min, 'C'=400rpm. Main Spindle 35-5,000rpm (18.5kW Motor), Sub Spindle Speed Range 35-5,000rpm (18.5kW Motor). Driven Tool Spindle Speed Range 25-4,500rpm (3.7kW Motor). 12 Position Turret (12 Driven Positions). Turning Tool Dimension 25 x 25mm, Internal Turning Ø40mm, Maximum Rotary Drill/Milling Cutter Ø20mm. S/No. 155170 (2002). Hydrafeed MX-1B Barfeeder. With Cromar Chip Conveyor, Coolant System, Tool Setting Arm, Parts Catcher, Foot Switches, LNS Mobile Swarf Bin, Quantity Of Assorted Axial/Radial Driven Toolholders, Pratt Burnerd 3 Jaw Power Chuck, 3 Assorted Collet Chucks, Turning Tool Blocks & Manuals. Overall Dimensions L3,320 x W1,930 x H2,052mm. Weight 5,700kg. Casdpfx Ajx Ag Aujflja

Condition: used, Year of construction: 2013, Goodway GS2600Y CNC Turning Centre with Fanuc Series 0i-TD CNC Control, 12 Position Tool Turret, Tailstock, 250mm Powered 3 Jaw Chuck, Spindle Speed 4000rpm, Filtermist FX4002 Oil Mist Extractor. Machine Weight 6700kg. S/No. 94E092 (2013) Cjdpfxsxztkvj Afljaa Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Csdpfx Afoxzq Ufslsaa Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Mori Seiki NT5400/1800 SZ DCG CNC Twin Spindle Turn & Mill Machine with DMG Mori MSX-701 III CNC Control, Max Work Piece Swing 920mm, Max Turning Length 1921mm, Bar Work Capacity 107mm, Travels x 1 Mill Head 1040mm, Y Axis +/- 255mm, Z I Axis 1940mm, B Axis +/- 120 deg, X 2 267mm, Z 2 1830mm, Spindle Speed 2400rpm, Capto C8 Spindle Taper, Spindle Bore 120mm, Tool Head Spindle Speed 8000rpm, Tailstock Travel 1830mm, 10 Position Tool Turret, (2) x 450mm Powered 3 Jaw Chucks, High Pressure Coolant Filtration System, Clean Mist Oil Mist Extractor, Machine Weight 36000kg. S/No. NT540GE0032 (2007) Codpoxzq R Hjfx Afleaa Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.