Used Powder Gun for sale (2,194)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Iiedpfxowhbnlo Am Eea

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 7,000 mm, total height: 3,000 mm, total width: 2,600 mm, warranty duration: 12 months, 🟦 Semi-automatic Powder Coating Plant – Compact Container System Iijdpsxlr Emsfx Am Eja Modern semi-automatic powder coating line built in a container-type enclosure, consisting of a powder coating booth, curing oven, and automatic transport system. This unit is a compact and mobile solution designed for coating small metal parts — ready for operation anywhere after connecting to power supply. Ideal for production companies, workshops, or service providers looking for an efficient and flexible coating system. 🔹 Technical Specifications CURING OVEN - Working chamber dimensions: 4000 x 700 x 1300 mm (L x W x H) - Heating power: 24 kW - Motor: 2.5 kW, 1500 rpm - Radial fan capacity: 4500 m³/h - Thermal insulation: 150 mm - Maximum temperature: 250°C POWDER COATING BOOTH - Working chamber dimensions: 2000 x 600 x 1400 mm (L x W x H) - Filtration unit: * Motor: 2.2 kW, radial fan 12,500 m³/h * Two conical polyester filters L600 * Twist-type filter mounts * Pneumatic powder cleaning system with adjustable cyclic discharge AUTOMATIC TRANSPORT SYSTEM - Travel length: 11,500 mm - Hanger spacing: 250 mm - Number of hangers: 45 pcs - Maximum speed: 4 m/min - Motor power: 0.75 kW 🔸 Features and Advantages * Compact container design – easy to transport and quick to install * Low energy consumption and small footprint * Continuous process ensured by automatic conveyor system * High-efficiency filtration system * Fully equipped “plug & play” unit – ready to start immediately

Condition: ready for operation (used), Powder feeder, screw conveyor, screw blender, used machine Dimensions: 855 x 720 x 810 mm Container size: 600 x 500 x 800 mm Electrical data: 230/400 V; 0.43 kW; 50/60 Hz Iodpew Tt S Esfx Am Ejia The screw conveyor has a double bearing design and is equipped with a cover that opens due to the material flow.

Condition: used, Side stapler for boxes with guns and introduction belt Ijdpfx Asrwrlajm Eeia

Condition: excellent (used), PRO XP85 MANUAL ELECTROSTATIC SPRAY GUN GRACO REF. L85T10 - Brand: GRACO - Reference: L85T10 -PRO XP85, Standard, BOQ. 1.5MM., 85KV. -Industry in general, metal, wood -Does not include hose, avaliable under demand - Second-hand product that has passed a very rigorous tuning Iisdjivt Riepfx Am Eoa - 1 year warranty. It is in like-new condition - VAT not included

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system with workpiece size L6500mm, W1500mm, H2200mm New price approx. €800 000. Iiedsvdlfzspfx Am Eja

Condition: new, Year of construction: 2024, Powder coating oven Working dimensions (mm): 1500 (w) x 3000 (d) x 1800 (h) Technical data: • Power consumption: 46 kW. •Temperature max 230C Equipment: • Top transport • Control panel with adjustable time and temperature • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Ijdpfegui T Ujx Am Eoia Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Powder coating oven The oven is designed for drying elements painted with water-based and solvent-based varnishes. Working dimensions (mm): 1500 (w) x 4000 (d) x 2000 (h) Technical data: • Power consumption: 59 kW. Equipment: • Top transport, • Touch control panel, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the workpiece heating process), • Locks for safe opening and closing, • Time module, • Thermoregulator (controls the temperature inside and maintains it at an appropriate level), • The oven is equipped with rails for easy transport. Iedpfx Aog Ib Epsm Esia • Maximum working temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Powder coating furnace Working dimensions (mm): 1200 (w) x 1500 (d) x 1800 (h) Nwrin Technical data: • Power consumption: 20 kW. • Maximum operating temperature: 230 ° C Iisdpfshg Ty Ijx Am Eoa Equipment: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Oven for the powder paint shop powered by natural gas. The furnace is designed for the polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of stainless steel AISI 1.4301, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Technical data: • Power supply 400V 50Hz • 2 x Riello 90kW burners • Operating temperature 210C • Maximum temperature 230C •High-class thermal insulation 150mm •Baffle in the middle of the stove allowing 50/50 Equipment: • upper transport, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the heating process of details), • Safe opening and closing locks, • timer module, • Thermoregulator (controls the temperature inside and maintains it at the right level), • The stove is equipped with rails for easy transport. Cbauevig73 pvxg CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. Ijdpfjfktipsx Am Eoia We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Feel free to contact us.

Condition: new, Year of construction: 2025, Powder coating oven powered by natural gas. The furnace is designed for polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of AISI 1.4301 acid-resistant sheet metal, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 5000 (D) x 2000 (H) Technical data: • Power supply 400V 50Hz • Riello 90kW burner • Operating temperature 210C • Temperature max 230C •High-class thermal insulation 150mm Equipment: • Upper transport, • Convection (Equal temperature throughout the furnace, accelerating the heating process of the details), • Locks for safe opening and closing, • Time module, Iiodpfjh Igq Rox Am Eoa • Thermoregulator (controls the temperature inside and maintains it at the appropriate level), • The oven is equipped with rails for easy transport. Pvxgim CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All products of the BUMEX SP brand. Z O.O. are EC certified. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Year of construction: 2025, Oven / Dryer Iiodsg Uw Dkjpfx Am Esa Technical Data: Working dimensions: 1200 x 3000 x 1800 mm Power consumption: 33 kW Maximum operating temperature: 230°C Equipment included: Internal trolley External trolley Hot air circulation system (even temperature distribution throughout the oven) Safety locks for secure opening and closing Powder Coating Booth Working dimensions: 2800 x 2200 mm Fan power: 2.2 kW Fan capacity: 10,500 m³/h Very quiet operation Automatic filter cleaning system CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, The perfect paint set for car rims, motorcycle frames or other smaller things with a rail system and trolleys. Powder coating oven 1500 x 1500 x 1800 mm Powder coating booth 2000 x 1800 mm Iodsd S N R Ujpfx Am Ejia Oven / Dryer Technical data: Working dimension 1500 x 1500 x 1800 mm • Power consumption: 20 kW • Maximum operating temperature: 230 ° C Equipment: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. Powder cabin: Working dimensions: 2000 x 1800 mm 2.2 kW fan power Fan capacity 10,500 m³ / h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Oven for powder paint shop powered by fuel oil The furnace is designed for the polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of stainless steel AISI 1.4301, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 4000 (D) x 2000 (H) Technical data: Cbauevig73 • Power supply 400V 50Hz • Burner Riello 90kW • Operating temperature 210C • Maximum temperature 230C Iedpfx Ameiv H Hpj Eoia •High-class thermal insulation 150mm Equipment: • upper transport, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the heating process of details), • Safe opening and closing locks, • timer module, • Thermoregulator (controls the temperature inside and maintains it at the right level), • The stove is equipped with rails for easy transport. pvxg CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O.. are wE certified. We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Feel free to contact us.

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description Ijdpfefz Dqxjx Am Eoia • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Iiodpfx Amofz Dubo Eja Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Iiedpofz Apqjfx Am Eja Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Isdpofz A Ilofx Am Esia Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot Iedpfx Ajfz I Rmsm Ejia • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Iiodpfx Amefz I R Rj Eea Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area Iiodpfxofz I Sge Am Eoa • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk. Iijdefzktzspfx Am Eea

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Iedpjfz Dqfofx Am Esia Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Ijdpjflq Spofx Am Eoia Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Ijdofz Dt Nopfx Am Eeia Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.