Used Press Line for sale (21,465)

Condition: used, Year of construction: 1994, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: Sahinler Type: GHP 100 Hydr Machine Type: Hydraulic press Pressing force: 100 t Machine weight: approx. 4 t Working Area Reach: 280 mm Ram stroke: 300 mm Table and Ram Table size: 1,000 × 600 mm Ram clamping surface: 600 × 400 mm Additional ram plate: approx. 900 × 600 mm Dimensions Overall height above floor: 300 mm Gkodpfxo Aaz Rls Akhjd Overall width: 1,200 mm Electrical Data Operating voltage: 380 V EQUIPMENT Additional ram plate, approx. 900 × 600 mm

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 40 t Stroke: 280 mm Ram stroke: 8–120 mm Stroke rate: 120 strokes/min Throat: 350 mm Installation height: 270 mm Table and ram Table size: 710 × 565 mm Ram area: 500 × 280 mm Drive Total power requirement: 2.2 kW Machine data Machine weight: approx. 3.2 t Gsdpfs Aa Afdsx Akhjkd EQUIPMENT No information available regarding accessories.

Condition: used, Year of construction: 1993, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gsdpfx Ao Aa Ngbjkhskd Performance data Pressure: 160 t Retraction force: 40 t Drawing cushion pressure: 630 kN Ejector pressure: 50 kN Total power requirement: 42 kW Machine weight: approx. 19.5 t Stroke and movement data Stroke: 300 mm Stroke speed: 400 m/min Stroke speed under load: 16–42 strokes/min Return speed: 350 mm/min Drawing cushion stroke: 100 mm Ejector stroke: 50 mm Table and ram Table size: 1,500 × 700 mm Ram clamping area: 1,200 × 560 mm Working area Overhang: 360 mm EQUIPMENT Drawing cushion Ejector

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Gsdpe Aa Nl Rjfx Akhjkd TECHNICAL DETAILS Performance data Pressure: 10 t Stroke rate: 180 strokes/min Total power requirement: 1.1 kW Machine weight: approx. 0.6 t Stroke and ram data Stroke: 8–60 mm Ram adjustment: 40 mm Ram surface area: 180 × 110 mm Working area Overhang: 180 mm Table Table surface area: 400 × 340 mm Table height above floor: 935 mm Through-hole in the table: 80 mm Dimensions Space required: approx. 1.2 × 1.5 × 2.0 m EQUIPMENT Two-hand operation Foot operation Control cabinet

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gsdpfj Ad Abgsx Akhekd WORK AREA Table dimensions: 230 × 200 mm MACHINE DETAILS Manufacturer: Mäusle Machine type: Spindle press Dimensions, length: 750 mm Dimensions, width: 550 mm Dimensions, height: 1,500 mm Weight: 200 kg

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 24 t Table Gkjdpe Aa Nwmefx Akhjd Table length: 1,060 mm Table width: 650 mm Minimum opening: 165 Dimensions Space requirement: approx. 1,300 × 700 × 1,500 mm EQUIPMENT No information available regarding accessories.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Pressing force: 32 kN Stroke: 100 mm Dwell time: 60 s Support area: 300 x 240 mm MACHINE DETAILS Manufacturer: Schmidt Machine type: Metal press Length: 1,500 mm Width: 800 mm Height: 2,000 mm Weight: 400 kg Gedpfxo Adz U Eo Akhokd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS PERFORMANCE Press force: 150 t BENDING RANGE Bending length: 3,100 mm ELECTRICAL DATA Operating voltage: 3 × 380 V Frequency: 50 Hz Rated current: 63 A MACHINE DETAILS Manufacturer: Beyeler Type: RH 150-3100 Machine type: Press brake Year of manufacture: 1990 Manufacturing number: 590112896 Length: 4,000 mm Width: 2,400 mm Height: 2,700 mm Gkedpfxe Advdbo Akhjd Weight: 8,500 kg Important note: The scope of sale and delivery includes a manual control without foot pedal operation; the control shown in the initial image is only an example!

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Machine type: Eccentric press Manufacturer: EBU Model: H50F Serial number: P5318482 Rated force: 500 kN Stroke adjustment: 8–120 mm Ram adjustment: 70 mm Stroke rate: 115 min⁻¹ Table Table dimensions: 650 × 520 mm Hole diameter: approx. 120 mm MACHINE DETAILS Drive Motor power: 3 kW Dimensions and weight Length: 1,500 mm Width: 800 mm Height: 2,400 mm Weight: 3,000 kg Gkjdpe Ad Ifdjfx Akhod EQUIPMENT Guards for the flywheel are available.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Gjdpfx Ako Ad Hg Hshokd TECHNICAL DETAILS GENERAL DATA Manufacturer: Bihler Type: MACH 1 Machine type: Bending press Tool diameter: approx. 700 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,300 mm Width: 100 mm Height: 1,700 mm Weight: 1,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Gksdpfxs Adufdo Akhed TECHNICAL DETAILS WORKBENCH Table dimensions: 560 × 320 mm Hole diameter: approx. 90 mm FLYWHEEL Flywheel diameter: approx. 1,700 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 1,700 mm Height: 2,000 mm Weight: 670 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table dimensions: 300 x 300 mm Hole diameter: approx. 100 mm MACHINE DETAILS Manufacturer: Insuna Machine type: Spindle press Godpfxo Adznfo Akhskd Dimensions (L x W x H): 760 x 760 x 1,600 mm Weight: 200 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. Godpfoy Uk A Ssx Akhskd SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Manufacturer: EBU Type: H75F Machine number: P5318382 Machine type: Eccentric press Rated force: 750 kN Stroke adjustment: 16 – 140 mm Ram adjustment: 80 mm Stroke rate: 105 min⁻¹ Table dimensions: 800 × 610 mm Bore diameter: 150 mm MACHINE DETAILS Motor power: 4 kW Dimensions (L × W × H): 3,000 × 1,500 × 2,400 mm Weight: 3,000 kg EQUIPMENT Gedpfx Ake Ad Hhwjhekd Guard screen cover Flywheel cover

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 100 t Machine weight: approx. 5.7 t Godpe Acgcfsfx Akhskd Stroke and operating data Stroke: 0–500 mm Overhang: 310 mm Installation height: 1,130 mm The installation height is specified with the stroke in the upper position. Table and ram Table surface: 800 × 650 mm Ram surface: 800 × 600 mm Through-hole in the table: 355 mm Table height above the floor: 800 mm Safety data Safety distance: 270 mm Follow-up measurement: 135 m/s Follow-up travel: 44 mm Dimensions Length: approx. 1.2 m Width: approx. 2.0 m Height: approx. 3.67 m EQUIPMENT Conversion to comply with new safety regulations

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: Gkedpfsx Ezuysx Akhsd - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. Gkodpfx Akozvmy Hjhjd 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Gkodpfxeztaufe Akhed

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Gksdpfxjzv Utns Akhed Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN Gsdspvlf Sepfx Akhjkd strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Gkodpfx Aji Akrkekhed Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Gkjdpfx Asx S Rbvekhjd

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: Godpfx Aksz Rnu Tehskd • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2007, operating hours: 1,192 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 25,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Gjdpfxsy U D Uuj Akhokd

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Gkodpfx Akszuzi Tehsd Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.