Used Profile Bending for sale (7,897)

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm Nwjdpexaacvofx Abdsc turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg Njdpfx Aow U U Udobdowc range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: 840D, overall weight: 15,000 kg, This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Nwedeynhu Depfx Abdjc Additional equipment • Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm • Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm Machine Benefits Technical Machine Benefits • Nc workpiece spindle 1: traverse path x1: 1760mm, z1: 385mm/ travel resolution on the cnc: 0. 001mm/ input speed of the axes max: 60 m/min • Nc workpiece spindle 2: traverse path x2: 2011mm, z2: 390mm /travel resolution on the cnc: 0. 001mm/input speed of axes max: 60 m/min • Nc workpiece counterholder: traverse path x3: 104mm, z3: 107mm /travel resolution on the cnc: 0. 001mm /input speed of the axes max: 60 m/min • Gear tower 1: traverse path y11: 195mm /travel resolution at the cnc: 0. 001mm /swivelling angle b1 max: 10° • Loading gantry: travel u5 axis: 1907mm /traverse path v5 axis: 271mm • Input speed (all applicable axes): max 60 m/min • Rotation diameter max: 210mm/machining diameter max: 200mm/workpiece length max: 300mm/interface, workpiece clamping: kk6/workpiece speed max: 1100 1/min • Factory back spindle 1/2: speed max: 1000 1/min/gear spindle 1 and 2, shift slide y11, nc workpiece counterholder, slide x1/x2, slide z1/z2, a11 axle (charging unit), u5 & v5 axes (loading gantry):/speed max: 3000 1/min, 9000 1/min for gear spindle 2 • Loading gantry: 500kg/magnetic chip conveyor: 100kg/water recooler: 150kg

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Excellent condition Nodpfx Aeu H Ibnebdjwc Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles Nsdpfx Aeh S Ti Esbdowc -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 Nwsdpfx Abjxixrujdec - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Table width: 550mm - Table length: 300mm - Model: Hydraulic - Max. stroke: 180mm - Power: 28.0ton - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2001, Used horizontal bending machine from Sterli Bieger Type: 300 HE/CE Capacity: 30 tons Including bending dies: V45, V80 and V125 mm Njdpjyg Ntrofx Abdjwc

Condition: excellent (used), Year of construction: 2005, Technical Data: Minimum bending capacity (steel): ø 19.8 x 3.0 mm Maximum bending capacity (steel): ø 76.1 x 3.0 mm Maximum bending capacity (stainless steel): ø 76.1 x 1.65 mm Bending radius: max. 150 mm Bending angle: max. 190° Bending direction: clockwise (right) Maximum tube length: 6000 mm Mobile control panel CE marking Dimensions (L x W x H): approx. 7200 x 2000 x 1650 mm Weight: approx. 3 t Equipment: Torsion device Programmable bending angle Digital travel distance display Digital torsion angle display 1 x movable drawer support Collets Condition: Very good condition, lightly used Nwedpeynt Icsfx Abdoc The seller is not liable for any typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display Nwsdpfx Abspu R Nvsdsc - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown Nedpfswhf Hfex Abdjwc - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Nodpjwbvmiefx Abdjwc Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device Nedoi Duh Ijpfx Abdowc - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece. Nwjdpfxjuz If Nj Abdjc

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz Nwjdsh A S Htepfx Abdsc - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm Nwjdpfx Aoxzubvsbdjc - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Immediately available, free loading onto truck included.

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Nwjdpfon Upglox Abdsc

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame HEMA PSM 300 Universal Profile Grinder - Automatic belt tensioning - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm - Very quiet operation Nwedpoyl Ilwjfx Abdec - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner

Condition: new, Year of construction: 2025, The Senfeng T series profile lasers are Senfeng's entry-level model for processing profiles. The machine frame can be equipped with a wide range of jaw plates and machine bed lengths. The machine can also be equipped with a 2.5D cutting head or 3.0D (Bevel) cutting head. With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Technical data: - Laser Power: Up to 6,000 watts Nwsdpfx Ajvvh Ngjbdoc - Laser Wave length: 1020 nm – 1080 nm - Maximum tube length: up to 15200 mm - Maximum profile weight: depending on the jaw plates and length of the machine bed - Tube cutting capacity: Ø 8-350 mm - Tube cutting capacity: 8x8 - 350x350 mm - Chuck rotation speed: Depending on the jaw plates - Axes speed: Depending on the jaw plates - Operating voltage: 400V / 50Hz ± 5% - Tailing (residual material): 70 mm - Cutting gases: Oxygen, Compressed air, Nitrogen ===== In addition, the machine is equipped with the following options: - Control: TubePRO - Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately - Valve for collecting small pieces. This is opened and closed in the control with an air cylinder - Pneumatic jaw plates, for fast and precise clamping - Various automations possible - Aviation aluminum beam - Laser source: Max Photonics or IPG - Cutting head: Depending on power - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Nedpeg Avfkefx Abdswc -images similar-

Condition: as good as new (ex-display), Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, mot. backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Njdpfxog Dvpyo Abdewc -images similar-

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, Nwjdsdzy Uuspfx Abdec pressure regulation of the upper beam, mot. backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: used, Year of construction: 2022, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, Njdpfx Asd Nxn Nobdswc pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar- Nsdpfsg Avglsx Abdjwc

Year of construction: 2025, condition: ready for operation (used), functionality: fully functional, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, working length: 2,500 mm, machine/vehicle number: 0100-0149-2024, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Nedpsym Di Ijfx Abdjwc TECHNICAL DETAILS Working length: 2,500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,100 x 1,500 mm Weight: 700 kg EQUIPMENT Suitable for flat material External reference: Lot 15 / Blickle

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood Njdpfxjvtgn Ne Abdewc in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².