Used Prokuwa Plastic Gmbh for sale (73,566)

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. Tjdouanqaepfx Adlef We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Tjdpfxjxqrvvj Adlef Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo VAST XT Year of manufacture: 2003 Retrofit Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm C99 control with operating panel VAST XT probe head VAST GOLD probe head (optional) 13-position probe changer magazine Probe change rack Probe accessories Calibration sphere Technical documentation Additional accessories HP workstation with monitor Calypso Basic software, latest version Tsdpfswyukdjx Adlsf Additional options available Available at short notice Delivery without the automatic feeder shown

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Todpfxswiatij Adljf Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: excellent (used), Year of construction: 2019, HSM V Press 1160 plus Pressing force 532 kN, opening width 1,195 m, opening height 0.65 m, drive power 4 kW, press type BP, dead weight 2.43 t, transport length 1.78 m, transport width 1.568 m, transport height 2.995 m, press type baler. Todpfx Adol Uvukjlsf Press immediately ready for use.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Cleaning Centrifuge Machine type: SA100-B55-1 Year of manufacture: 2001 Rotor speed: 2,980 rpm Rotor diameter: 365 mm Maximum sludge compartment capacity: 2–8 kg Weight: 525 kg Motor power: 5.5 kW Todpfxow Ewyro Adlsf Operating voltage: 5.5 kW The machine was serviced regularly and was connected to a parts washing machine in a paint shop.

Condition: used, Year of construction: 2019, functionality: fully functional, total width: 800 mm, total height: 2,100 mm, total length: 1,130 mm, Vertical glass washing machine with a washing height of 1000 mm. This washing machine is designed for integration into the outfeed conveyor of glass edging machines with vertical transport. It is equipped with two washing brushes: the rear brush is fixed in position, while the front brush can be adjusted in width manually using a handwheel, allowing the cleaning of different glass thicknesses. The wash water is blown off the glass panes (front and back) using air nozzles and then collected in a reservoir. The machine can be operated either with fresh water or via a separate water tank. It is currently set up for operation with fresh water. Water tank and pump are not included in the price. Modifications to the outfeed conveyor of the glass edging machine may be required for installation. Assembly can be carried out by us upon request but is not included in the scope of delivery. The pictures show an identical washing machine already installed at other customers—such as in a Bottero 810 BCS or a Bodo Gerhard K300. The washing machine offered here is in used but good condition. It has been thoroughly inspected, cleaned, and fitted with new wear parts by us. Tjdpsxqmxxjfx Adlsf

Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining - Operating mode 4 - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side Tedpfxjxmr Uwj Adlsf - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings - Optional fixators and tie rods - optional commissioning/installation - optional transportation

Condition: like new (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: Tjdpfxew Izrco Adlef - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Todpfxsqzx Dbj Adlef Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material Todpfju Thbxsx Adlof SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2005, operating hours: 6,650 h, functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Bosh Rexroth, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, table width: 1,300 mm, table length: 4,000 mm, rotational speed (min.): 1,200 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,500 kg, spindle speed (min.): 1,200 rpm, spindle motor power: 10,000 W, spindle nose: HSK63F, number of spindles: 1, number of slots in tool magazine: 15, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION. 1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F. Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360° Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min Gateway: 290 mm 1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm Tedpswh Aidjfx Adlef Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table division into two stations for alternating work 1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.) Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card Profibus SERCOS drive control system Data input: USB-Stick, local network Operating system: Windows2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Movable control panel with manual control panel Remote diagnostics Interpolation: 5 linear, 2 ½ D circular Connected power: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% efficient. Storage location: northern Poland

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Antifrogen N 34 Vol.% in IBC-Container, Antifrogen N 34 % by volume in IBC container Offered are IBC containers a 1000 kg Antifrogen N 34 Vol.% ADR: no dangerous goods 13 x COMBINATION IBC (31HA1) 1000 L a 1000 K Tsdpfekwc I Tox Adljf Immediately available 13 pieces IBC containers Price: 1551 in Euro per IBC container (plus VAT ex Nettetal) Delivery time: available from stock (subject to prior sale) Payment: 30 days net (creditworthiness provided) Mode of shipment: transport against extra charge possible Validity: subject to change (Subject to technical changes and prior sale!) Location: MTA Germany GmbH, 41334 Nettetal Price: 1551 Euro per IBC Conatiner (plus VAT ex Nettetal) Transport is not included in the offer!

Year of construction: 1999, condition: refurbished (used), functionality: fully functional, We offer here a screw with 160kW engine. Screw as well as the engine were overhauled by the manufacturer and has not been used since. Tedpfx Aeic Rftedlsf Included in the offer are: -Screw RO230 from GDW -motor 160kW Siemens 1LA6 316-4AA68-Z 315L

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Todpfx Aeu Thh Ejdlef Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Multistage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Tedpjfz D Dnefx Adljf Product no.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Tjdpfx Aou Th S Sedlof Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. All documentation is available. Tsdpfxjni Awpj Adljf

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Tsdpju Thkaofx Adlof Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available Tjdpfx Adsrq D D Eoljf

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Todpfx Aju Thabedlef Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Tedpeu Tha Iefx Adlof Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Tedeu R Rtbspfx Adlof Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors Tedju Tg Sijpfx Adlsf 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleaning are the greatest advantages of this plant technology. Remark: The screen plates / screen segments have been covered with steel plates without a screening function over the course of time for use in the paper sorting system. The steel plates are only attached and can be removed again. Tedpfxeu Tg Rrj Adlef Remarks on the overall layout: Technical documentation for the machine is only available in German. An inspection of the machine is possible by arrangement. We do not accept any liability for the technical data or any errors.