Center Lathe

Meuser & Co. GmbH M2L

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable Hjdpfxevr Eh Es Aadsnh • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Three-phase motor, electric motor -Power: 5.5/8/22 kW -Speed: 740/975/1475 rpm -Shaft: Ø 55 mm -Construction: B3 Hsdpfxod E Tfns Aadonh -Protection class: IP 33 -Dimensions: 750/510/H390 mm -Weight: 275 kg

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears Hnodpou Ix E Hofx Aadeh *

Condition: new, The Basic 170 Super PRO is a high-performance Conventional Horizontal Lathe from the renowned brand KNUTH, designed specifically for metalworking applications. Over the years, the Basic series has established itself as a reliable choice for mechanics, featuring a modern ergonomic design and extensive standard equipment to meet the demands of contemporary users in workshops and training centers. This lathe boasts a turning diameter over bed of 354 mm and a center width of 1,000 mm, providing robust construction from high-quality cast iron for maximum stability. With hardened and ground gears for quiet operation, adjustable spindle bearings for precision, and an effective coolant system, the Basic 170 Super PRO ensures long tool life and minimal maintenance. It also features ample storage for accessories and an easy-to-use position indicator for auxiliary functions. For universal applications in repairs, training, and production, you can request a quote for this exceptional Conventional Horizontal Lathe today. Hedpouyhvxofx Aadenh

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hnodpfx Aaewm Nn Rsdjh

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Hnedpjfbbx Rofx Aadjh Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received. Hnsdpfoxlza Hjx Aadeh

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Hsdswm D Ilepfx Aadsnh Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: used, mileage: 27,800 km, power: 196 kW (266.49 HP), fuel type: gasoline, gearing type: automatic, first registration: 10/2022, emission class: euro6, color: silver, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, All the vehicles we offer are in stock and can be viewed at any time. All photos are original pictures of the respective vehicle. ISOFIX Business package Preparation for trailer hitch Black glossy control buttons Lane change warning incl. Audi Storage package Front and rear side airbags Rear view camera Audi sound system Floret silver metallic Ambient lighting package plus Audi smartphone interface Valcona leather Privacy glazing Audi virtual cockpit plus Comfort key with sensors Electrically adjustable front seats Headlining in black fabric Interior and comfort * 5-seater * Darkened rear window * Ambient lighting * Exterior temperature display * Color glazing * Electric exterior mirrors, heated and folding * Electric windows front and rear * Electric lumbar support * Electric seat adjustment * Driver's seat with memory function * Speed limiter system * Electric tailgate * Heated rear window * Keyless-Go * Automatic air conditioning * Leather multifunction steering wheel * Black leather interior * Leather gear lever * Lumbar support * Height-adjustable steering wheel * Center armrest * Electric parking brake * Shift paddles on the steering wheel * Heated front seats * Automatic dimming mirrors * Cruise control * Virtual/Digital Cockpit * Central locking * Central locking with radio Multimedia and communication * Android Auto * Apple Car Play * Bluetooth * On-board computer * Connected Service/Networked Vehicle * DAB * Hands-free system * Induction charging station * MP3 interface * Navigation system * Phone Box * Radio * Sound system * Voice control * Touch screen * USB connection Safety and environment * ABS (anti-lock braking system) * Distance warning system * ASR (traction control system) * Automatic distance control (ACC) * Parking aid camera * Front parking aid * ESP (Electronic Stability Program) * High beam control (Light Assist) * ISOFIX (child seat preparation) * LED rear lights * LED daytime running lights * Automatic light control * Front fog lights * Parking assistant * Power steering * Automatic start/stop system * Traffic sign recognition Miscellaneous * 5-door * Roof rails * Drive Mode Select * Tailgate * LM rims Hsdjvh Scbopfx Aadenh * Metallic Attractive financing and leasing offers also available without a deposit. Our sales advisor will be happy to advise you. ---- Trade-in possible at any time at fair conditions. ---- Take advantage of our various service packages, e.g. warranty extension, pick-up from the nearest train station (for an additional charge, more information on our website ) ---- Opening hours: Mon-Thu and Thu-Fri 09:00 to 18:00, Wednesday 09:00 - 16:00, Saturday 09:00 to 13:00 (please make an appointment on Saturdays to avoid long waiting times) ---- The information provided here is for better identification of the vehicle and is not a binding description or guarantee of the scope of equipment. We accept no liability for typing or transmission errors. All details in the advertisements are non-binding and without guarantee and must be checked by the buyer on acceptance. Subject to prior sale.

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 6,000 mm, spindle motor power: 30 W, The lathe is in good technical condition, connected and ready for testing. It features digital readout, faceplate, and steadies. Specifications: Swing diameter over bed: 1,090 mm Distance between centers: 6,000 mm Hjdpfsx A S Sbjx Aadsnh Swing diameter over cross slide: 700 mm Main drive motor power: 30 kW Dimensions (L x W x H): 8,200 x 1,800 x 1,855 mm Machine weight: 11,000 kg