Used Promote Band for sale (4,065)

Condition: used, Year of construction: 2004, High-capacity band saw with roller feed MG model BMSO 320L Used semi-automatic band saw - High-capacity band saw with roller feed - Progressive hydraulic feed - Chip cleaning brush - Saw speed adjustable via electronic frequency inverter from 20 to 100 m/min - Front millimeter stop of 500mm with electric limit switch Hfodpfsx Ng Sxsx Abvod Serial number: 41021 - Blade dimensions: 4160x27x0.9mm - Motor: 1.5kW - Round cutting capacity at 90°: 320mm - Rectangular cutting capacity at 90°: 500x320mm - Square cutting capacity at 90°: 320mm

Condition: good (used), Year of construction: 2001, machine/vehicle number: 201224, functionality: fully functional, cutting speed: 110 mm/min, Used band saw Type: Semi-automatic *This machine was initially automatic, it has been modified to be semi-automatic. Cutting capacities: 90º round, 15º left-right, 30º left-right, 45º left-right: 410mm. Square at 90º: 850x400mm Square at 15º left-right: 800x400mm Square at 30º left-right: 700x400mm Square at 45º left-right: 550x400mm Minimum cutting capacity: 10mm / 10x8mm Minimum cutting length: 35mm Cutting speed: 17-110m/min. Drive motor power: 7.5kw Hydraulic pump motor power: 5.5kw Actions from control panel: Rotation to degrees. Saw drive Drive forward and backward the feed rollers. Raise and lower clamp clamps. Hjdpfjuc Tpasx Abvefd Open and close clamp Machine being overhauled. Request operating video.

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Hedpjxrg E Iefx Abvefd Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: excellent (used), CATALOG NO. 7920 TECHNICAL DATA Equipment: - Disc Hfedpfx Abeyrryfsvjd - Tape feeder - Guillotine - Glue tank (granulate) - 2 pressure rollers - Cutting unit – guillotine - 2 milling units for edge profiling - 2 scrapers – for removing excess glue - Minimum length of workpiece: 210mm - Minimum width of workpiece: 70mm - Thickness of workpiece for edgebanding: 8-45mm - Edge tape thickness: 0.4-2mm - Support extension from table - Feed motor: 0.25kW - Total power: 5.5kW - Extraction port diameter: 115mm - Dimensions (L/W/H): 2100x670x1320mm – Weight: 276kg ADVANTAGES – Unpainted – Austrian production – Very good condition – Documentation (DTR) – Used edgebander Net price: 14,900 PLN Net price: 3,550 EUR (at exchange rate of 4.2 EUR) (Prices may vary with higher fluctuations)

Condition: ready for operation (used), Vertical bandsaw Hahn + Kolb with Ideal bandsaw blade welding machine and filing machine Hedpfjry U Nhex Abvofd

Condition: excellent (used), Year of construction: 2019, For sale is a very nice Lange B90KFE edge banding machine. The machine is in excellent working condition and can be inspected and tested on site by arrangement. Sale is on behalf of a customer, location: Friedeburg region. Machine details: - Machine length: 4030mm - Workpiece thickness: 8-60mm - Minimum workpiece width: 75mm Hfedpfxsylch Hj Abved - Edge thickness: 0.4-3mm - Total connected load: 7.55kW Features: Pre-milling unit Edge feeder Sawing unit Milling unit Scraper blades Net price, plus VAT. An invoice will be issued for the machine. Shipping of the machine is of course possible at additional cost. If you have any questions or are interested, please feel free to contact us! Your JG Holztechnik Team from 26188 Edewecht.

Condition: excellent (used), Year of construction: 2010, cutting range round steel at 90°: 540 mm, Used Bomar band saw Individual 720.540 GH, semi-automatic, column-guided. Sawing diameter Ø 540 mm, can cut at an angle on one side. Vice opens to 720 mm. Year of manufacture: 2010. In really good condition. Hedjxv Siyspfx Abvofd

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm Hsdpfx Ajq Evn Esbvefd - Weight approx. 1000 kg

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Hfedpfsyncpvox Abved Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Hedpfxow Nadgo Abvjfd Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Incl. quick-heating, exchangeable, Teflon-coated glue pot Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Incl. spraying unit Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Hfsdpfxsymcrbj Abvjd Storage location: Nattheim

Condition: good (used), Year of construction: 2010, cutting diameter 220 mm saw band length 2480 mm Hfjdpeyf N D Uefx Abvod table height ca. 910 mm capacity 90 degrees: flat 245 x 115 mm capacity 90 degrees: square 195 x 195 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: round 85.0 mm capacity 60 degrees: square 85 x 85 mm turning speed range: 45 + 90 m/min dimensions of saw-band 2480 x 27 x 0.9 mm clamping width max. 270 mm total power requirement 0.75 + 1.1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430 x 720 x 1700 mm New price in 2010 .. 2.400 Euro Special price on request Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - The saw arm can be tilted up to 60° for mitre cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, heavily dimensioned cast iron saw arm - 2 saw blade speeds for optimum cutting results (400 V) - Automatic limit stop after material average - Robust cast iron vice with quick lock - Ball-bearing saw blade guide with quick adjustment for adapting to the workpiece width - workpiece width guarantees optimum work results

Condition: new, *IMMEDIATELY AVAILABLE* Including pop-up banner roof / fold-out steps / LED interior lighting / 230V power distribution Hsdpfx Abex Tcd Sevofd Technical Data: • Brand: Vezeko • Model: VE 27.46 SP • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: Unregistered • TÜV (roadworthiness)/inspection: 2 years from first registration • Internal dimensions (LxWxH): 460 x 216 x 235 cm • External dimensions (LxWxH): 623 x 220 x 307 cm • Permissible total weight: 2,700 kg • Unladen weight: 1,310 kg • Payload: 1,390 kg • Chassis: High-loader (wheels under body) • Tyres: 195/55R10C • Suspension: AL-KO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust V-drawbar, hot-dip galvanized • Overrun brake system from AL-KO • Very sturdy welded frame, fully hot-dip galvanized • Fold-out steps on the right (direction of travel) including canopy • Easy deployment of steps with assisted lift (gas struts) • Rotating bar lock mounted externally on side flap (contrary to illustration) • Side flap dimensions: approx. 3420 mm x 2200 mm • Handrails on both sides of the steps • 4x heavy-duty support legs with crank • 230 V CEE power inlet • Multiple free power sockets • 2 LED light strips interior with switch • Walk-on roof • Fold-out advertising panel with gas struts on the roof • Drawbar step in front of entry door • Manoeuvring handles • Automatic jockey wheel • Extension rod for easy closing of flaps • Sturdy sandwich construction, 50 mm insulated • Exterior panels of hot-dip galvanized and additionally powder-coated steel sheet • AL-KO hitch with collision protector • Steel mudguards • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Integrated rear fog light Optional accessories – Please inquire: • Anti-theft device • 100 km/h approval with shock absorbers • And more New trailer with warranty and TÜV (inspection). - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided - Export plates including customs clearance available Descriptions and pictures are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been a specialized dealer & workshop for over 30 years for brands Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, changes, and prior sale excepted -

Condition: good (used), Year of construction: 2000, machine/vehicle number: 1100295, functionality: fully functional, Manufacturer: BEHRINGER Model: HBP 530-1104GA Year of manufacture: 2000 Machine number: 1100295 Technical Data Working range round material: ø 530 mm Working range square at 90°: 700 x 500 mm Working range round material at 75° mitre: ø 510 mm Working range square at 75° mitre: 700 x 500 mm Hfjdpfx Aeylbf Rjbvod Working range round material at 60° mitre: ø 465 mm Working range square at 60° mitre: 465 x 500 mm Working range round material at 45° mitre: ø 300 mm Working range square at 45° mitre: 300 x 500 mm Minimum cut-off length: 35 mm Minimum material dimension: ø 30 mm / □ 20 x 20 mm Remnant piece length, automatic manual: approx. 35 mm Remnant piece length, automatic: approx. 280 mm System / band tension pressure: 95 bar Coolant volume: 200 litres Cutting speed: 17 to 110 m/min Motor output – saw drive: 7.5 kW Motor output – hydraulic pump: 5.5 kW Motor output – coolant pump: 0.12 kW Connected load: approx. 14 kW Current consumption: 28 A Voltage: 400 V / 50 Hz Fuse protection: 35A Valve / control voltage: 24V DC Cable cross-section: 4 x 6 mm² Saw blade dimensions: 8800 x 54 x 1.6 mm Dimensions Length x width x height: Weight: 8,800 kg

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, cutting height (max.): 260 mm, actuation type: manual, Equipment: CE marking, Description Offered here is a robust metal bandsaw, model HESKA HES 260. The machine comes from our workshop inventory and has been regularly used. It is a classic, solidly built metal bandsaw meeting German industrial standards. Ideal for workshops, metal fabrication, maintenance departments, or small production facilities. Hfjdoyn D R Ujpfx Abved Technical Data - Manufacturer: HESKA Maschinenfabrik GmbH - Model: HES 260 - Max. blade length: 3,660 mm - Year of manufacture: 1996 - Manual clamping device - Equipped with coolant system - CE-compliant version Condition - Used - Complete - Normal signs of use - Fully operational Commercial Note The price includes VAT, and an invoice with VAT can be issued! Machines of this type are extremely durable and require minimal maintenance. The listed price allows for an economical entry into a solid metal bandsaw, significantly below the price of modern new machines. The sale is made under exclusion of any warranty and liability for material defects. The machine is sold as seen.

Condition: used, Storage location: Sonnefeld Hedjway Dcspfx Abvjfd

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Hjdpfx Abjvvkd Tjvefd Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hedjvvkfdspfx Abvjfd

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Hodpjvvkfqjfx Abvsfd Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Hfedpsvvkfwsfx Abvod

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Hedpfx Absxyiilevofd

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Hfjdewayzbepfx Abvjd

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Hfsdpjvvkg Iefx Abved

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Hfodpfx Aswl D S Uebvjd

Condition: excellent (used), functionality: fully functional, Outreach 630 mm --- Hodpfxjyr Hgao Abvjfd Cutting speed from 15 - 120 m/min --- Hydraulic table feed --- Table load approx. 450 kg --- Hydraulic lifting rollers in the table --- Table feed travel 400 mm . Table to the right of the saw blade, W x D 500 x 975 mm Table to the left of the saw blade, W x D 500 x 975 mm . Designed for cutting high-quality material or for setting up clamping fixtures .