Used Protective Gas Welding Machine for sale (74,656)

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Iisdpfx Aehpf Iyeg Uoc Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Iedpeycv Sasfx Ag Uoic Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: good (used), Year of construction: 2007, shaft length: 1,064 mm, Internal article number: 26037 Laser welding machine Rofin Starweld 90 Year of manufacture: 2007 YAG laser Power: 4.5 kW Laser power: 90 W Pulse peak power: 5.5 kW Pulse duration: 0.3 - 20 ms Wavelength: 1064 mm Dimensions (L x W x H): 100 x 50 x 100 cm Measured without table and mounting Weight: approx. 170 kg Unfortunately, I cannot put the system into operation because it needs to be connected to a water circuit with deionized water. Furthermore, an error message appears indicating that the fiber optic cables need to be checked. According to the previous owner, however, this is related to the water circuit. Iodpfx Agsy D Nlqe Uoic

Condition: used, total power requirement:6,5 kW dimensions of the machine ca.:0,9 x 0,5 x 1,25 m Ijdpfx Ascxxp Usg Uoic

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA Ijdpfx Agscxxwno Uoic throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Iijdjzamffopfx Ag Ujc Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Ijdpsy Naq Iofx Ag Ujic Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), functionality: fully functional, I am selling 1 to 6 complete sets here. Brand: Miller, Model: Proheat 35 – almost new. Food warmer with induction heating element, 400–460 V, CE marking. New price for a complete set: 54,000 euros. Iiodsyr Idtjpfx Ag Ujc Sale only to businesses (B2B) + VAT, or net price for export. Errors and omissions excepted.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Iedpfoy Snycox Ag Ujic

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Iodpfxohwhf Rj Ag Uoic Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Iijdpfshv U Tqjx Ag Uec Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz Iisdpfxsxrb Tgj Ag Usc - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging. Iiedpfx Agemxkdpo Uec

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm). Iedpfx Asmxkggsg Ueic

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 390701, For sale: a two-head welding machine, URBAN model AKS 3900. The machine is in perfect working order. It was used in a single-shift production environment. Year of manufacture: 2021. Purchase invoice date: 2022. Iiodpszd Ra Tjfx Ag Uec

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Iedpfx Agjy N Du Re Ujic Net weight: 2175 kg

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Iodpfx Agjy N Duko Uoic Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Iiedey Rqh Tepfx Ag Ujc Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Iijdpfxetkuk Ro Ag Ujc

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. * Iiodpfx Asixxqksg Uoc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Iijdpfx Agoh S H R Sj Usc Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Iiodshv U S Topfx Ag Uoc Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: FL40, laser power: 4,000 W, laser wavelength: 1,070 nm, input voltage: 400 V, input current: 40 A, input frequency: 60 Hz, type of input current: three-phase, We offer this Rofin FL40 laser welding machine in very good condition, manufactured in 2017. Nominal power: 4000 W Power range: 10 - 100% Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Power stability: ±2% Isdpfx Aszcf T Tjg Ujic Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at the beginning of module life: 12.7 kVA Active power at the beginning of module life: 11.8 kW Current consumption at 400 V at the beginning of module life: 18.4 / CCU: +0.5 A Apparent power at the end of module life: 15.2 kVA Active power at the end of module life: 14.2 kW Current consumption at 400 V at the end of module life: 22 / CCU: +0.5 A Current consumption at 480 V at the end of module life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2014, ARO PAN 160 spot welding machine, including control cabinet and cooling unit -CE marking -Year of manufacture: 2014 -Welding power max. 328 kVA -Digital display & control cabinet / IBOX control system -Cooling unit / water-cooled Iodpfsy Umuqjx Ag Ueic -Ideal for spot welding of steel / aluminum / stainless steel / titanium -Electrode wear compensation -Modularity: The system allows the integration of different welding heads and electrode arms -Foot switch Dimensions / Complete system L x W x H 2.5 x 2.5 x 1.8 meters / Weight approx. 1000 kg Errors and omissions excepted.

Condition: new, Year of construction: 2025, longitudinal and transversal seam welding machine --- Power at 50%: 80kVA Highest welding-current: 35,9kA Electrode force: 100-600daN / double stroke Throat depth: 550mm --- Weld control: Filius classic 128 program --- Extra Equipment: - foot pedal - flow monitor - main switch Iedpfx Agjwqmrzj Ueic --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock