Used Protective Gas Welding Machine for sale (92,252)

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10 (5-times, 8-program) Iasdpfx Adox Dmu Todol --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24. Year: 2019 Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Weight: 90 kg. With Esab water cooling unit, TA24 control panel and new Esab Exeor SR 21 4 m. TIG-hose. Machine have been tested and serviced. Iasdpfx Adjxvq Dcsdjl We have 2 machines of this type in stock.

Year of construction: 1993, condition: ready for operation (used), A lattice-girder/girder welding system year 1993 is offered. Girder types: KT 8, girder height: 90mm-250mm. Upper chord: 5mm-12mm smooth/ribbed. Diagonal: 4mm-7mm smooth. Lower chord: 4mm-10mm smooth/ribbed. Maximum girder length: 14000mm, cutting grid: 100mm/200mm. Coil run-off tables: 5 units, maximum stacker stacking height: 500mm. Documentation available, inspection possible by arrangement. Iajdpfx Adsxz Ewhsdel

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm Iaedpfx Aextqv Tsddjl contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, warranty duration: 24 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 180 A, welding current at 100% duty cycle: 140 A, protection type (IP code): IP23, welding current (min.): 1 A, welding current (max.): 220 A, Equipment: type plate available, For sale: OTC DTX 2200 1A – 220A 30% 220A 60% 180A 100% 140A 230V 50/60Hz Pulse – Fast Pulse (0,5-500 Hz) – Ultra Fast Pulse (500-2000 Hz) ColdTack (0,01 – 10,0 Sec) Pre gas (0,05 – 1,00 Sec) Post gas (0,5 – 25,0 Sec) Up Slope (0 – 5,0 Sec) Down Slope (0 – 8,0 Sec) Start current (5 – 220A) End current (5-220A) IP23S IEC 60974-1 IEC 60974-10 Ijdjxk Taispfx Addeal IEC60974-3 Steel – Stainless Steel Weldable Including: SR26 U/D 4M TIG Welding Torch Earth work cable 35mm² 4 Meter with clamp Gas hose Pressure regulator 24 Months Warranty Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Extremely rare machine, possibly the only one for sale in the world today. Gas flush whole bins or dolavs of product. The CV-Tek® CVP Systems A-200 Overhead model line brings the advantages of Modified Atmosphere Packaging to large and bulk items. Full pallets and dolav bins can now be processed efficiently. Being suspended from either the ceiling or wall allows excellent logistics for moving bins and pallets during processing. Wrinkle free seals are achieved with seal bars of 100 inches (2540mm) and automatic bag stretchers. Floating head prevents bag pullout. Iedpfx Aji E Tt Hoddoal

Condition: new, Year of construction: 2025, Equipment: CE marking, Versatile 3-in-1 fiber laser with 3kW power, suitable for: Iaodjw Srtfspfx Addsl - Cutting various metal sheets with high precision. - Welding with clean, strong weld seams. - Cleaning and degreasing surfaces before further processing. ✅ Compact and user-friendly design ✅ Ideal for workshops and metalworking companies ✅ Efficient alternative to multiple individual machines Technical specifications: Power: 3 kW Functions: Cutting, welding, cleaning Application: Steel, stainless steel, aluminum, ... Availability: Immediately available from our showroom in Belgium Warranty: 2 years

Condition: used, functionality: fully functional, Amps.: 650 Watercooled: Yes. Wire feeder: Esab Feed 4804 MA24 Control: MA 24. Country of origin: Sweden. With synergic in wire box and 4,5 m. Esab PSF 510 welding hose. Machine have been tested and serviced. Isdpfx Adsxvqz Usdjal

Year of construction: 1994, condition: ready for operation (used), Offered is a lattice girder/girder production machine year approx.: 1994. Girder height: 80mm-300mm, upper chord: 5mm smooth/ribbed, diagonal: 7mm smooth, lower chord: 5mm smooth/ribbed, girder length max.: 14000mm, cutting grid: 200mm, spool payoff tables: 5 pieces. Inspection is possible by arrangement. Iaedpfjxz Ewbjx Addol

Condition: new, Year of construction: 2018, functionality: fully functional, High-performance gas-powered tool for concrete, steel, and solid masonry fixings Driving energy: 105 J Isdpfx Adexx Dffsdjal Rated voltage: 6 V/DC Battery capacity: 1.5 Ah Number of fixings per battery charge: 3,000 pcs Magazine capacity: 40 pcs Length: 435 mm Width: 124 mm Height: 365 mm Machine weight with battery: 3.7 kg Scope of delivery: 1x new/unused device Numerous collated nails and gas cartridges A used machine in very good condition is also available separately. Surcharge: 250 EUR

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Welding current range 3...350A DC / 10...350A AC Iaodpfxox A S Txj Addol with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m - Ground cable with fixed clamp 5m, 50mm2 - Transport trolley TY2A - Coolant FREEZECOOL 10l - TIG torch CITORCH T 35W EB C5B, 5m water-cooled - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Condition: excellent (used), Water-cooled, pneumatically operated rocker arm spot welding machine Manufacturer: DALEX Model: SL 25-1 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Electrode force: 278 daN Arm gap: 140 or 300 mm Arm reach: 180-500 mm With attached control cabinet according to VDE 0100 With main switch Isdpfx Adoxvh Hbodoal Synchronous welding control MPS 15036

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation Iaedpfx Adoxrb Tgsdsl - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 2013, functionality: fully functional, Amps.: 420 Watercooled: Yes. Year: 2013 Iajdsxvqzbjpfx Addsl Country of origin: Sweden. Size (L x W x H): 650 x 1100 x 1000 mm. Weight: 240 kg. With Esab PSF 315 4 m. welding hoze. Machine have been tested and serviced.

Year of construction: 1992, condition: ready for operation (used), Offered is a lattice girder/girder welding system year 1992 incl. corresponding stacker SVH 195 year 1992. Girder height: 90mm-250mm, upper chord: 5mm-12mm smooth/ribbed, diagonal: 4mm-7mm smooth, lower chord: 4mm-10mm smooth/ribbed, girder length max.: 14000mm, fixed lengths, cutting grid: 100mm/200mm. 5 coil payoff plates, stacker SVH 195, stacking height max.: 500mm. Inspection is possible by arrangement. Iodpfx Adoxz Ev Rodeal

Condition: used, ES710LV - Single Head Welding Machine For more information about this equipment, please contact us by clicking on the form below. Iaedpfx Aex Nw Sijddel

Condition: used, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Hardly used Böhler Terra NX 400A available for sale Ijdpfx Adjx Dy R Usdjal

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Iaedpfx Adox E Rd Dedsl Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm --- Weld control: Digit 8 --- Iodpfxjxyqn Ao Addjal Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, functionality: fully functional, Amps.: 400 Iaedpfoxvqy Dsx Addol Watercooled: Yes. Wire feeder: Esab Feed 304 M12. Country of origin: Sweden. Closed M12 wirebox with 4WD and new Esab MXL 411w 4m. welding hose. Machine have been tested and serviced.

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Iodsx Dk H Tepfx Addeal Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit!

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Iaodsxfzr Nspfx Addol Weight approx. 37 kg

Condition: used, functionality: fully functional, Good day. For sale is a used Merkle TIG 254 DC. Ijdpfexr Dknsx Addoal A new inspection has been carried out, with the following components replaced: The circuit boards The AC fan The solenoid valve The red quick coupling The blue quick coupling The coolant

Condition: used, Technical details: plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm Isdpfx Adju Ngfqedoal WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm Iaodeu Nv Emspfx Addol rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *