Used Punching Clip for sale (1,896)

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Codpfx Asxf Uqrofljaa Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: refurbished (used), Year of construction: 1984, functionality: limited functionality, pressing force: 40 t, year of last overhaul: 2024, punching force: 40 t, SCHAAL Punching Press Type SEP40 Machine number 84/623 Year of manufacture: 1984 Condition: very good, mechanically overhauled, without press control; A new control unit is available on request Press force: 40 tons Sheet width: 150 mm Stroke: Fixed stroke 50 mm. (Original 8 - 70 mm) Number of strokes – infinitely variable: 100 – 250 spm (possible up to 400 spm, but with the current stroke of 50 mm the maximum is 250 spm) Ram surface: 340 x 320 mm Cjdpfx Afexwk Tgjlsaa Tool holder bore: Ø 40 x 80 mm Ram adjustment: 70 mm Table size: 550 x 580 mm (not included in the scope of delivery, available upon customer request) Clear opening in table: 400 x 90 mm Lateral frame opening: 250 mm Distance between uprights: 560 mm Drive power: 5.5 kW Dimensions (H x W x L): 2300 x 1600 x 1400 mm Weight: approx. 3,800 kg Feed: Type: SZV 2 Number: EP4340 Year: 1999 Strip width: 8 - 120 mm Feed length: 2 – 80 mm Feed thickness: 0.1 – 2 mm Feed accuracy: ±0.01 mm Equipped with Unidor press force measuring system, calibrated on 29-2-2024 Press and roll feed have been mechanically overhauled at the beginning of 2024. Renewed: eccentric shaft, main bearings, flywheel bearings, connecting rod bearings, ram roller bearings, drive belt for roll feed, pressure regulator, rotary union seals, access doors, and polycarbonate panels. The machine can be inspected in operation.

Condition: used, Year of construction: 1997, sheet width 750 mm plate length 1250 mm plate thickness 6 mm pressure 30 t max. feed 30/40 m/min throat 950 mm Caedpfxevuz Sfj Aflea no. of strokes 200 Hub/min oil volume 140 l 4 kW 3200 kg 2500 x 2000 x 1800 mm Features: - Automatic sheet metal shifting - Hydraulic die/punch clamping - Tools included - Light barrier - Foot switch - Operating instructions

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 24550616, overall weight: 7,000 kg, total height: 1,900 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 1,200 mm, table length: 2,450 mm, AMADA ARIES 245 CNC Punching Machine Caodpfx Ajxw Tt Nsflsa - Punching force: 200 kN - Power connection: 11 kVA - Includes accessories such as various punches and punching tools Attention: The item must be collected definitively between 19 and 23 January 2026 on a specific date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: like new (used), Year of construction: 2021, overall weight: 1,200 kg, total height: 2,200 mm, total length: 2,600 mm, total width: 1,400 mm, power: 2 kW (2.72 HP), For Sale: Brand: GHD Hartmann Model: Hartmann Clip EC 101 IS Clip Machine EC: Easy Clean Year: 09/2021 Suitable for plastic/paper clips. This closing unit features a compact machine frame and its own pulse-controlled drive. It integrates easily with vertical or horizontal packaging machines (bagging machines). Thanks to intermittent operation, it is ideal for manual loading. Synchronization with the upstream filling machine is not required. Bags are discharged via a cross conveyor belt at an angle of 20°, 30°, or optionally 45° and 60°. A built-in vacuum unit at the closing station extracts excess air from the bags for a neat, tight package. The product bags are then clipped and discharged. Codjxrf T Djpfx Afleaa Option included: HPD printer for printing a date onto the plastic clip. Specifications: - Adjustable speeds - Capacity up to approx. 3,600 units per hour - Product dimensions: Length: up to 400 mm, Width: up to 220 mm, Height: up to 120 mm - Siemens S7-1500 control system - SEW drives - Pneumatics: Festo - Stainless steel safety covers and guides The machine can be inspected and viewed on location. If you have any questions or require further information, please feel free to contact us. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Casdpfx Aoxz Hxaeflea Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Year of construction: 2004, operating hours: 38,000 h, condition: excellent (used), Bobst SPanthera 106LE automatic die-cutter Size: 76 x 106 cm Technical Details: paper from 70 to 1000 gsm corrugated board up to 2 mm max. format: 760 x 1,060 mm min. format: 350 x 400 mm speed up to 9,000 Csdpfxoxx Txze Aflsaa Equipment: stripping station optical register infeed automatic pile feeder adjustment ultrasonic double sheet detector Centerline 1 micrometric plate 1 plate 4 mm 2 closing frames quick Lock stripping Non-Stop delivery elevated 220 mm

Year of construction: 2002, condition: used, machine/vehicle number: 54, Item number: MA961 Manufacturer: Boschert Type: P-60 Year of manufacture: 2002 Machine-No.: 54 Length [mm]: 1800 width [mm]: 3000 height [mm]: 1991 weight [kg]: 5800 Connected load: 380V / 4 KW Stroke [mm]: 50 Working height [mm]: 915 Cjdpfx Afocq Nbweljaa Punching force [to]: 60 Table size LxW: 1100 mm X 3000 mm accessories: manual table supports

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 weight of the machine ca. 1 t Cedpfx Aovvx E Sjfljaa

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2510047, total height: 2,200 mm, total length: 8,000 mm, total width: 7,000 mm, table width: 1,300 mm, table length: 6,000 mm, controller manufacturer: FANUC, controller model: SERIES 18-P, AMADA VIPROS 2510 CNC Punching Machine - Punching force: max. 196 kN - Equipped with a total of 31 turret stations - Includes a large lot of various accessories, such as punches and punching tools Note: The item must be collected on a binding date between 19 and 23 January 2026, to be mutually agreed upon. Csdpfxexw Trfe Aflsaa FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements height 2252 mm Control Unit Brand BOSCH Caodpjx Aliaofx Aflea Model MTX CMP70 Dimensions Machine Length 6500 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1250 mm Main Drive Punching force 180 Kn Maximum sheet thickness 6.4 mm This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Application Types Punching

Condition: used, functionality: fully functional, Year of construction: 1996, PEGA 358 CNC FANUC 1996 Power 30T Max thickness 6 mm Sheet size 2000 x 1270 mm Repositioning 4000 x 1270 mm Turret with 45 stations: 24A 12B 2C 1D 2E. Number of auto-index: 4 (2B, 2C) Ball table, light curtain safety barrier. Csdexrkk Uspfx Aflsaa

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table Codpfxjudbzye Aflsaa This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: as good as new (ex-display), Year of construction: 2024, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Codpoxyy Apsfx Afleaa Maximum stroke 30 mm Weight 295 kg

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t pressure 30 t Csdpfxspxri He Afloaa volt 380 V frequency 50 Hz

Condition: ready for operation (used), PEDDINGHAUS FLAT, PROFILE AND BAR STEEL SHEAR WITH NOTCHER AND PUNCH TYPE: 210 AD/13 MACHINE NO.: GJ 3730 YEAR OF MANUFACTURE: 1970 Equipment: various punch tools and dies (see photo) standard accessories operating tools 2 foot switches for single/continuous stroke documentation Condition: workshop-tested, functional Cjdpfoxc Ep Tex Aflsaa

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Codjxcbbrjpfx Aflsaa Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 901116, 110 x 160 cm Inner frame width Net price ex works, without disassembly and transport MANUFACTURER'S PRODUCT DESCRIPTION (see also photos): Versatile and universal production machine for die cutting – creasing – scoring – embossing, and perforating all types of paper – cardboard – solid board – corrugated board – displays plastic films – semi-cutting – gaskets – etc. Caodpfx Ajxy Rptjflja Compact design – highest precision – quiet, smooth operation – high hourly output Maximum occupational safety 10 format sizes available Both the base and moving platen frames are welded steel constructions manufactured from single pieces. Bearings are made of bronze in special steel; shafts, tie rods, and helical gears are made of high-grade steel. The ultra-precise eccentric bushes allow for extremely fine pressure adjustment. The eccentric bushes themselves are locked in place by safety gears, effectively preventing unintentional adjustment. The spacious opening and three end positions of the platen facilitate easy feeding and removal, allowing for high average hourly throughput. The guide support is low-maintenance. Continuous operation, single, or skip feed can be selected. Moulding accuracy is especially high with balanced balls. Individual knives can be held for unchanged material without heavy sheet laying. Waste material and corresponding turnover are reduced. All pressure bars are mounted on a mechanically infinitely adjustable auxiliary bridge. Open working area is crucial not only for trouble-free feeding and precise die plate positioning but also for immediate waste ejection and clear view of the belt sleds and feeding rollers. Cutting pressure is transferred via the diameter of the cutting wheels onto several large blocks which are seated against their corresponding bases, ensuring the die-cutting process is unified with the machine base. Power transmission and braking are handled by an electro-pneumatic clutch; a compressor with air reservoir is included. Centralized lubrication system is installed. All pneumatic locking devices are fully integrated. When operating in timer mode, a yellow warning light above the machine is illuminated. An additional safety bar above the closed platen edge stops the platen instantly when activated. The control cabinet beside the machine prevents vibration of the electrical components.

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Cedpjxxzhwjfx Afleaa

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Cajdpfx Afoxyy Aijlsa Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja Cajdpfondz Npjx Aflea extensive accessories ca. 50 Sätze pressure 50 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: M-1581, The Mühlbauer CP 2005 is an industrial punching machine designed for processing card blanks (e.g. smart cards, plastic cards) as part of card production and finishing operations. It combines precision, reliability, and efficiency – qualities that make it ideally suited for production environments with high demands. Key features: High-precision card punching The machine feeds card blanks through a punch-and-die tool, punching the cards to exact dimensions. This ensures clean, uniform end products. Hydraulic drive system A hydraulic system controls the position and speed of the punch – providing consistent precision and extended tool life. Modular & customizable tool design Tools can be custom-made or adapted to different card formats or special requirements, keeping the machine highly versatile. Caodpfx Afjx Aiapsloa Robust construction & continuous operation capability The CP series from Mühlbauer is renowned for high throughput and continuous operation – ideal for industrial card printing and punching installations. Efficient material handling Card material feeding and punching are designed so that cards can be processed further or stacked directly after punching – for example, for lamination, personalization, or packaging. Typical applications: - Manufacturing of smart cards, chip cards, or plastic cards - High-volume production in the card industry - Production of cards for ID badges, access cards, identification cards, etc. - Industrial operations demanding precision, repeatability, and stable processes

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Cjdpfx Afexyyynolsaa Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Csdsxyyyhopfx Afleaa Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Csdpfx Afsxyyx Reloaa Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg