Used Pvc Twin Screw Extruder for sale (9,066)

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm Hsdpsy Dc Uxofx Aafsnk 1 front discharge guard 18 kW

Condition: used, Year of construction: 2007, Mazak Nexus HCN 6000-II Twin Pallet Horizontal Machining Centre. S/No. 196442 (2007) with Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, 60 Position ATC, High Pressure Coolant & Filtration System, Through Spindle Coolant, Spindle Speed 7000rpm, Spindle Taper CAT40, Rinishaw Tool Setter, Swarf Conveyor. Please Note: Back-End Spindle Tool Holders Only, Consumable Tools Not Included. Country of Origin: Japan Hnjdpfoyzhfdex Aafsk Location: This lot is located in Bornago, Italy. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,7 / 4,5 kW inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 1.970 x 1.000 x 1.750 mm (open lid: H: 2.250 mm) infeed height : ± 1.450 mm Suitable for loader with “Easy Connect” dimensions drum : (l x w x h) : ± 1.000 x 765 x 665 mm Hnjdpey Alnxjfx Aafek + Loader for eurobins

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: Hedpoxya Hzsfx Aafsnk 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: good (used), Year of construction: 1994, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW Hnedpfey Dgmlsx Aafok -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm Hjdpsyz Sfhefx Aafjnk dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Hnsdpfx Aaowbf U Nsfjk

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Serial number – AC-6B140510037. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. 1 x Keymac vertical form, fill and seal twin bagging machine. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. Hnedpfx Aasy An I Ijfok System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: used, Unloading at the bottom Hsdpfx Aaoyzfyrofenk 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled)

Condition: reconditioned (used), machine/vehicle number: 2586k, No.: 2586k 1 used, functionally tested and operating compounding-pelletizing line, equipped with : Extruder twin-screw COMAC Type EBC 68 with Motor 110 kW-DC screws 2x Ø 68 mm – 40 L/D co-rotating intermeshing Segmented screws & cylinders, Water / Medium cooled 1x venting port 1x side feeder screws 2x Ø 52 mm Melt-filter 2 piston Type K-SWE 160 incl. Hydraulic-pack BKG underwater-pelletizing unit Type AH 2000, complete with: diverter-valve / Hydraulic Hnodjd H S U Uopfx Aafsk pelletizer with motor 4 kW incl. die-plate and knife-holder Water – Box TWS volume 900 liter, heating power 40 kW Installed Water pump with 11 kW, By-Pass-System Pellet Spin-dryer TVE 2000 ED with motor 4 kW water sieve with circulation pump 4 kW Siemens S7 – Touch control board More extruders / recycling - and compounding lines ex our stock Wuppertal-Germany available, as: pelletizing systems, dosing & blending, screen-pack-changer, pellet classification, granulating and many more. Ask for our most recent stock-list or visit us in Wuppertal-Germany. You´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Hjdpfxsh Eyd Rj Aafonk Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station Hodpfei Dtb Usx Aafjnk ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve Hsdpjd Sg I Isfx Aafonk control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, clothesline, PVC wire rope -Wire rope: PVC-coated steel cable -Type: 6x7 FC PVC transparent -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 1 piece available -Price: per piece Hnedpfopy Ryqsx Aafek -Weight: 6.6 kg/pc.

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping screw set with storage box -Type: various designs, see photos -Thread: M20 Hsdeu Npgwopfx Aafjnk -Price/Fee: complete -Box dimensions: 380/315/H60 mm Total weight: 11.7 kg

Condition: used, mileage: 21,800 km, first registration: 06/1999, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: other, suspension: steel, Year of construction: 1999, Equipment: electric window regulation, power assisted steering, = Additional options and accessories = - Hub Reduction - Sper = Remarks = Renault Thomas Sides BS13, 1999, 21,800 km Original!, 4x4 with reduction axles, Fully leaf sprung, Double engine, Cannon can be operated from inside, No registration = More information = Hsdpfxjy Awlij Aafonk Suspension: leaf suspension Front axle: Steering; Reduction: hub reduction Rear axle: Double wheels; Reduction: hub reduction Number of cylinders: 6 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Technical details turning diameter 100 mm turning length 320 / 345 mm swing diameter 145 mm Hnjdpfsyzzhrex Aafok spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 rpm total power requirement 42 kVA weight of the machine ca. 5,3 t Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. • Screw diameter: 200 mm • with degassing zone • Drive power: 72.5 kW Hodpfjw Iu T Tsx Aafenk

Condition: like new (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, power: 56.1 kW (76.27 HP), pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: documentation/manual, type plate available, We offer this like-new Kaeser CSD 105 screw compressor, year of manufacture 2023. Ambient temperature: 3 - 45 °C Hjdpfxoy Ahp Eo Aafenk Certified power: 55.0 + 1.10 kW Maximum operating pressure: 8.50 bar Rated motor speed: 2975 min⁻¹ Phases: 3 Frequency: 50 Hz Voltage: 400 V Full load current: 108 A Article number: 101259.2 Serial number: 1486-9064297 Wiring diagram: SCSD-03040 01 Option: K1_C3 Manufacture date: 2023-02 Should you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Tromp 3-roll Extruder stand alone unit working width 600mm extruding thickness from 1-10mm year of build 1996 electrical roller adjustment Siemens logo control with logo panel roller gap adjustable in panel speed rollers adjustable in panel Hedpfx Aaoy At Ugefjnk connector for external control start, stop, emergency, reset two emergency switches with safety relais

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake Hnodpfxsy A H Srj Aafek 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Year of construction: 2012, Technical details: max. wheel diameter: 260 mm gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° Hnjdpoy Amllofx Aafsk c-axis: 360 °

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2002, total length: 6,910 mm, total width: 2,550 mm, suspension: air, tire size: 315/80-R22.5, wheelbase: 5,500 mm, Year of construction: 2002, Equipment: ABS, = Additional Options and Equipment = - BPW axles - Alloy wheels - Air suspension - Drum brakes = Remarks = 2002 VAN HOOL 2-axle 20ft tipping chassis with HYVA lifting cylinder, ABS, BPW Eco with drum brakes, twin tires with 315/80-R22.5 tires (L: 11/11mm, 10/10mm; R: 11/11mm, 9/9mm), unladen weight 4,560 kg, maximum gross weight: 32,000 kg, Dutch registration with valid technical inspection (APK) until 19.03.2026 = Further Information = Axle configuration Tire size: 315/80-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Hedpfxsybk Rne Aafjnk Rear axle 1: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 70%; tire tread left outer: 70%; tire tread right inner: 70%; tire tread right outer: 70% Rear axle 2: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 60%; tire tread left outer: 60%; tire tread right inner: 55%; tire tread right outer: 55% Weights Unladen weight: 4,560 kg Payload: 27,440 kg gross vehicle weight: 32,000 kg Functionality Body make: VAN HOOL 2B0033 Condition Technical condition: very good Visual condition: very good Identification Registration number: OV-95-ZP Further information Please contact Arne Honingh for further information.

Year of construction: 2016, condition: used, machine/vehicle number: 571091905, Unladen weight: 750 kg Hjdpfx Asy Aqbdjafenk

Condition: used, all stainless steel loading height : ± 1.000 mm Hsdjyxnf Sopfx Aafonk diameter of the screw : ± 350 mm outfeed height ± 1.600 mm length of the screw : ± 3.100 mm dimensions hopper: ± 900 x 800 mm dimensions: (l x w x h): ± 3.200 x 900 x 2.300 mm mobile