Used Receiver for sale (2,081)

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximarely 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Specifications: Capacity: 1,585 gal Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Itjdpfx Asxnl H Njg Nen Straight Side: 1680

Condition: used, Compressed air receiver, air storage tank, pressure vessel KAESER Factory No. 481127K Year of manufacture: 2001 Tank capacity: 1000 litres Operating pressure: 11 bar - hot-dip galvanized pressure vessel - 3 connection fittings with 2" thread - 2 connection fittings with 1 1/2" thread - 3 connection fittings with 1/2" thread - 2 x small handholes for cleaning - 3 x ball valves - 1 x safety relief valve Itodpfx Agjxpqzus Non - pressure gauge - 2 lifting lugs on the top of the vessel Tank diameter: approx. 800 mm Total height: 2300 mm with stand (without attachments) Weight: 230 kg Good condition

Condition: good (used), Year of construction: 2013, machine/vehicle number: 581851, OKS Air receiver tank Serial: 581851 2013, 300l air receiver tank, working 11Bar, Itsdsqqhmkspfx Ag Nsn

Year of construction: 2018, condition: used, incl. water separator, max. operating pressure 10 bar, tank 500 L (Alup year 2001) Storage location: Nattheim Itedpfx Agew E E Eio Njn

Condition: excellent (used), Longitudinal and transverse receiving conveyor after the multi-blade saw Total length: 900 cm Total width: 140 cm Roller width: 100 cm Side discharge with chains Pneumatic side discharge Isdpjtvv Tusfx Ag Njtn

Condition: excellent (used), All is in good condition , and all time have make service on compressors Itsdpoxnynnofx Ag Njn

Condition: used, Light receiver, limit switch, button, safety switch, position switch -Price: per piece -Number: 8x available -Weight: 0.3 kg Itedeb A Nt Ijpfx Ag Nen

Condition: ready for operation (used), Table length: 6000 mm Table width: 700 mm Iedswuz Sdopfx Ag Netn Table height: 680 mm Mechanical drive On/off control on both sides

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 575531, OKS Air receiver tank Itedpfxjqqhtuj Ag Non Serial: 575531 2012, 500L tank, 11Bar

Condition: used, MSLE05-22211, 1 015 622, SICK light beam safety device receiver Iodpfx Ajq S R Tbog Notn Model: 1 015 622 Condition: Used

Condition: used, Receiver behind a four-sided or multi-saw planer Itsdpfxslqxk Aj Ag Njn 5 arms with receiving chains Adjustable arms Overall length of the machine 500cm Total length of arms 220cm

Condition: like new (used), Year of construction: 2015, Piovan Easy3 vacuum receiver C3 for resin Isdpfx Agjghhnpj Njtn Weight 5 kg Overall size: 300x300x700

Condition: good (used), Crane remote control, radio receiver, receiver, crane radio remote control, radio control system Itjdpstp Rgiofx Ag Nsn -Manufacturer: HBC radiomatic, radio control system for crane remote control -Type: FuSt 671 -Scope of delivery: as per pictures, plug/connection cable (without remote control). -Total dimensions: 320/210/H130 mm -Weight: 3.7 kg

Year of construction: 1989, condition: excellent (used), the subject of the sale is a feeder and a receiver for the sagem debarker. 100% functional Iodpfxjlx Nu Ue Ag Njtn

Condition: new, Year of construction: 2024, The subject of this announcement is a gate receiver - in the video its operation can be seen at 2:13 and 4:15 minutes. DEVICE DESCRIPTION Automatic loading or unloading of the workpiece working with through CNC drilling machines, Master series and more. The device has two depositing fields, which allows to perform work in a continuous mode (there are no interruptions during the supply of material) or to work on two different materials. MAIN FEATURES - Two depositing fields - possibility to separate two different types of elements - High gripper force can carry an element weighing up to 60 kg Itjdpjvdriyjfx Ag Non - Choice of manual feeding - Controllable with a portable control box TECHNICAL SPECIFICATIONS: Panel length: 250 - 2440 mm Panel width: 250 - 1300 mm Panel thickness: 9 - 60 mm Maximum panel weight: Up to 60 kg Types of effector: suction bar / suction cups Selected effector: Suction bar (4 x 1200 mm) Unit dimensions: 5000 x 3200 x 4100mm Width of element guiding rollers: 1200mm Roller diameter: 54 mm Number of tables: 2 pcs. (1 on the left side, 1 on the right side) Dimensions of the tables: 2500 x 600mm

Condition: excellent (used), Cross-country trac/multi-saw receiver Rollers width 1160mm Number of drawing rollers 14 Distance between rollers 550mm Itedpetrq S Hsfx Ag Nsn Drop chains with takers 4pcs Longest element 820cm Use behind a sawmill or a multi-saw

Condition: good (used), Year of construction: 2011, UNLOADING OF ELEMENTS IMA P620 This is a device that allows you to automate the drilling process. ELEMENT TRANSPORT BELTS Transport of elements is carried out by means of feeding tables equipped with transport belts. The device has the ability to configure the layout of the tables. POSITIONING OF THE RECEIVER The gantry system is equipped with linear guides by means of which the element is transported from the infeed table to the roller table. ELEMENT ROTATION The device has the ability to rotate the receiver in the X axis by 90 degrees. An additional advantage are suction cups, which ensure precise grip of the element. Itedoifzq Nepfx Ag Non TECHNICAL SPECIFICATIONS: Performance(without 90-degree rotation): About 18-20 cycles / min. Performance(with 90-degree rotation): About 14-16 cycles / min. Part types: Particleboard / MDF coated on both sides. Max. element length: 2500 mm Min. element length: 250 mm Max. thickness of the element: 40 mm Min. element thickness: 8 mm Max. width: 1300 mm Min. width: 100 mm Max. board weight: 50 kg Max. stacking dimensions: 2500 x 1300 x 1600 mm We invite you to contact us by phone

Condition: excellent (used), Year of construction: 2024, 2024 Keyence LM-X100T - Multisensor Measurement System Image Sensor 1", 20-Megapixel Monochrome CMOS. Receiver Lens Double Telecentric Lens. Image Measurement Wide-Field Measurement Mode 325 x 175mm. Field Of View High-Precision Measurement Mode 306 × 156mm. Minimum Display Unit 0.1 µm. Repeatability Inside Camera's Field Of View (20) Wide-Field Measurement Mode ±0.5 µm, High-Precision Measurement Mode ±0.1 µm, With Stage Movement XY axis (E1), X/Y plane (E2) ±0.9 µm. Measurement Accuracy Inside Camera's Field Of View (2ơ) Wide-Field Measurement Mode ±2 µm, High-Precision Measurement Mode ±7 µm, With Stage Movement X/Y Axis (E1) ±(1.8 + 0.02 L) µm, X/Y Plane (E2) ±(2.8 + 0.02 L) µm. AF Height Measurement Repeatability ±2 µm, Measurement Accuracy (EUZ,MPE) ±(4.8 + 0.04 L) µm *4. Touch Probe Measurement Measurable Range (X/Y) 248 x 141mm, Measuring Force 0.015N, Minimum Display Unit ±0.1 µm. Repeatability X/Y Axis ±0.14 µm, X/Y Plane ±0.14 µm, Z Axis ±0.14 µm. Measurement Accuracy X/Y Axis (EUX,MPE EUY,MPE) ±(2.8 + 0.02 L)µm, X/Y Plane (EUXY,MPE) ,±(3.8 + 0.02 L)µm Z Axis (EUZ,MPE) ±(4.8 + 0.02 L)µm. Iedoxnbn Aopfx Ag Netn Including Head Unit + Touch Probe, LM-XM20E: LMX Software (1 Off), OP-88752: 1mm Stylus Ball For LM-X (1 Off), OP-88751: 2mm Stylus Ball For LM-X (1 Off), OP-88750: Stylus Adaptor (2 Off), OP-99071 AC Power Supply Cable (UK/Ireland) (3 Off), 972361: Desktop PC & Software For LM-X (1 Off), 972358M: Display Monitor For LM-X (1 Off), LM-H1X: Standard Software (1 Off), LM-H1XE: Offline Editor Software (1 Off), LM-H1XC: CAD Offline Software (1 Off).

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel masticator blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below. Itodpfxsxgftte Ag Nen

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar Iodpjxlm Nysfx Ag Notn flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: ready for operation (used), Siemens 6FC5247-0AF22-0AA0 Control panel front video link receiver for decentralized installation, serial no. according to photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Itedpfxsi Ed Dps Ag Nen

Year of construction: 2003, condition: refurbished (used), functionality: fully functional, machine/vehicle number: BF 030003, This heavy duty 1200mm Granulator was refurbished fully in 2020 . Since then it has done only a very few tonnes of light weight containers after the refurbishment. New fixed and fly blades were fitted recently and it has not run since. 4 Rotating blades and 2 Stator blades. The semi solid rotor is water cooled if needed. Single step Belt drive from 110Kw Motor. Up to 1500 kgs per hour depending on the type of materials and feed rate. Air extractio to cyclone and bagging tower for big bags (FIBC) included. Loading conveyor with metal detection tunnel also included. Capable of grinding rubber also as fitted with the water cooled rotor. Two hoppers included , a standard one as shown in pictures and also included is a top entry completely enclosed hopper (not shown) suitable to received pre-shredded plastics or rubber. Itodpfx Agsv Su A Es Nsn

Condition: good (used), axle configuration: 2 axles, wheelbase: 5,110 mm, first registration: 05/1987, suspension: air, Year of construction: 1987, = Further Information = Axle Configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 000 kg Rear axle 2: Max. axle load: 000 kg Dimensions Dimensions (L x W): 643 x 250 cm Weights Unladen weight: 3.5 kg Payload: 28,490 kg Gross vehicle weight: 32,000 kg Maintenance, History and Condition APK (General Inspection): valid until 02.2026 Technical condition: good Visual condition: good Identification Registration number: OJ-58-LY Additional Information Please contact Sales for more information. Itodpsxpm R Eefx Ag Njn = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a reply within 8 hours. Prices are exclusive of VAT. No rights can be derived from the provided information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber). MOB: Dutch (Available on WhatsApp and Viber). When paying by bank transfer, the funds must be transferred to our bank account listed below. Always check the payment details stated on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Isdjxnxy Nopfx Ag Netn Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 8,940 mm, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, first registration: 06/2012, Year of construction: 2012, WKESD00000539315 = Further Information = Axle Configuration Rear Axle 1: Max. Axle Load: 9,000 kg Rear Axle 2: Max. Axle Load: 9,000 kg Rear Axle 3: Lift axle; Max. Axle Load: 9,000 kg Dimensions Dimensions (L x W): 1,386 x 255 cm Weights Unladen weight: 7,620 kg Payload: 33,380 kg Gross vehicle weight (GVW): 41,000 kg Condition Technical condition: very good Visual condition: very good Identification Registration number: OL-82-RZ Further Information Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano (Available on WhatsApp and Viber) MOB: Nederlands (Available on WhatsApp and Viber) When making payment by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details as listed on our website. If you receive different information, please contact us immediately. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Iodpfx Agjxpm N Us Njtn Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U