Used Recycling for sale (2,313)

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Type: Tyre shredder Input material: Car tyres, sports flooring Dedpfxox U Dvle Ad Hoki Required particle size: Pre-shredded to max. hand size / < 100 mm see PDF

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. Dkjdpfxevf E Avs Ad Hsi We accept no liability for the technical specifications or any errors.

Year of construction: 2026, condition: new, Description: The FR8 flotation tank is designed for density-based separation of plastics in recycling washing lines. The machine separates floating materials from sinking contaminants, improving material purity before further washing, drying, or granulation processes. Suitable for continuous industrial operation 24/7. Dkedpfx Aoyh Hx Eod Hsi Materials: PE, PP, HDPE, LDPE, plastic flakes, films Features: Effective density separation (float/sink process) Heavy-duty industrial construction Continuous operation for recycling lines Easy cleaning and service access Ready for integration with pre-washers, friction washers, and dryers 📩 Available in customized configurations. Contact us for details.

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Technical data: Dkjdpfoyh Hr Eex Ad Hsi Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Inlet opening: 500 x 450 mm Features: Heavy-duty industrial construction Replaceable wear parts Easy service access Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Dkedpfxschb Sbj Ad Hsi Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Model: Matrix 400 Complete Cable Granulation Line Condition: Excellent – Fully operational Availability: Immediate Technical Description: Cable granulation line including: • Fully rebuilt pre-shredder (recent overhaul) o All rotor bearings replaced o Gearbox bearings replaced • Conveyor with magnetic rollers for scrap separation • Dosing hopper • Feed conveyor • Blade mill with 3 / 4 / 5 mm calibration screens • Separation by cyclone and zig-zag separator • Finishing turbo • Densimetric table • Dust extraction with bag filter Dedpfx Aox It N Ued Hski Spare parts included: • Pre-shredder: 1 set of knives + counter-knives • Blade mill: 3 sets of blades and counter-blades Capacity: ≈ 200 kg/h finished product Application: Copper cable processing and recycling Price: €120,000 (complete processing line) Additional information: • Installation can be seen in operation • Photos and further details available on request 📩 Contact us for more information

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Dedpfxeu Hglls Ad Hoki Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: new, Year of construction: 2026, overall weight: 850 kg, rotor diameter: 240 mm, number of blades: 57, total length: 1,400 mm, total height: 1,200 mm, total width: 900 mm, rotor length: 430 mm, power: 17 kW (23.11 HP), warranty duration: 12 months, blade width: 10 mm, MIZAR SSH Series | High-Performance Single Shaft Shredders Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap and various metal types. Designed for reliability, flexibility and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY Single Rotor – Maximum Control Customized high-alloy blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. Programmable Hydraulic Pusher An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. Automatic Anti-Jam System In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. Screen-Controlled Output Size A heavy-duty screen located beneath the rotor determines final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring homogeneous output. APPLICATION AREAS Cable Recycling Copper and aluminum cables, wiring harnesses. Textile Waste Industrial textile scrap and fabric waste. Plastic Materials HDPE, PET, film, lumps, injection waste. Tires Car and light truck tires (pre-cut). Electronic Scrap PCBs, electronic components, mixed WEEE. Metals Aluminum scrap, radiators, light metal fractions. INDUSTRIAL-GRADE COMPONENTS Premium brands such as Siemens motors, SKF/FAG bearings, and Schneider or ABB electrical components ensure durability and long service intervals. All models are fully CE-certified. MODEL RANGE SSH S1 Compact solution for medium-scale operations. SSH M1 Balanced performance for diverse recycling needs. SSH L1 Dsdpfx Adjwm Iw Ro Hoki High-capacity industrial model. SSH XL1 Heavy-duty configuration for demanding throughput requirements. Why SSH Series? • Precise output size control • Stable feeding system • Reduced downtime with automatic reverse function • Low maintenance design • Easy integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized offer or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, overall weight: 4,750 kg, rotor diameter: 350 mm, number of blades: 62, total length: 1,850 mm, total height: 2,170 mm, rotor length: 920 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, MIZAR SSH Series | High-Performance Single Shaft Shredders Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap and various metal types. Designed for reliability, flexibility and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY Single Rotor – Maximum Control Customized high-alloy blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. Programmable Hydraulic Pusher An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. Automatic Anti-Jam System In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. Screen-Controlled Output Size A heavy-duty screen located beneath the rotor determines final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring homogeneous output. APPLICATION AREAS Cable Recycling Copper and aluminum cables, wiring harnesses. Textile Waste Industrial textile scrap and fabric waste. Plastic Materials HDPE, PET, film, lumps, injection waste. Tires Car and light truck tires (pre-cut). Electronic Scrap PCBs, electronic components, mixed WEEE. Metals Aluminum scrap, radiators, light metal fractions. INDUSTRIAL-GRADE COMPONENTS Premium brands such as Siemens motors, SKF/FAG bearings, and Schneider or ABB electrical components ensure durability and long service intervals. All models are fully CE-certified. Dedpfxog Dcq Te Ad Hoki MODEL RANGE SSH S1 Compact solution for medium-scale operations. SSH M1 Balanced performance for diverse recycling needs. SSH L1 High-capacity industrial model. SSH XL1 Heavy-duty configuration for demanding throughput requirements. Why SSH Series? • Precise output size control • Stable feeding system • Reduced downtime with automatic reverse function • Low maintenance design • Easy integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized offer or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,860 mm, total width: 1,200 mm, total height: 3,000 mm, overall weight: 5,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 60 kW (81.58 HP), rotor length: 770 mm, High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES Drive System Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. Industrial-Grade Components Siemens motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. Dksdsgwhb Ijpfx Ad Hoi Blade Technology Custom-engineered, high-alloy wear-resistant steel blades. Optimized cutting geometry for aggressive intake and consistent output size. Structural Strength Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS Scrap Metal Aluminum profiles, radiators, light scrap, sheet metal. E-Waste PCBs, motherboards, hard drives, mixed WEEE materials. Cable Recycling Copper and aluminum cables, wiring harnesses. Plastic Waste HDPE pipes, industrial drums, PET, big bags. Wood Waste Pallets, timber, MDF production waste. Alternative Fuels Pre-shredding for RDF and SRF production lines. MODEL RANGE DSH S1 Compact footprint. Ideal for medium-capacity operations. DSH M1 High-performance all-round solution for diverse material streams. DSH L1 Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for integration into complete recycling lines • Easy maintenance access • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, power: 200 kW (271.92 HP), ⚡ Processing Capacity & Specifications ✔️ Capacity: Up to 1300 kg/h ✔️ Total Power: 200 kW ✔️ Footprint: 120 m² Perfect for high-capacity, continuous 24/7 production. 🔁 Applicable Materials ✔️ Building, installation, flexible, and appliance cables ✔️ Communication, data, electronic, and low-grade cables ✔️ Automotive, harness, and all types of mixed copper cables ✔️ Industrial, armoured, and contaminated/difficult cables 🔍 Included Machines & Functions - Shredder (SSH): Pre-shredding and size reduction - Overbelt Magnetic Separator (OMS): Removes ferrous metals - Granulator (FGR): Refines particles for efficient separation - Zigzag Separator (ZZS): Air separation of light and heavy fractions - Turbo Mill (TRM): Ultra-fine grinding for maximum liberation - Densimetric Separator (DES): Precise density-based separation Dodpfowkflgex Ad Hski - Dust Collector (DTF): Ensures a clean and dust-free environment 🔄 Key Advantages - High Purity Output: Achieves 99.9% copper purity via multi-stage separation. - Efficiency & Automation: Fully automatic operation with minimal labour and low total cost of ownership (energy & maintenance). - Operational Reliability: Continuous feeding system without process fluctuation, ensuring high uptime. - Smart Design: Modular, maintenance-friendly architecture with PLC-controlled automation and real-time monitoring. - Compliance & Safety: CE-compliant, vibration-optimised, sound-reduced, and dust-controlled operation. 🎯 Designed For - Recycling businesses aiming for fast ROI through high metal recovery. - Operators requiring stable output quality even with mixed cable inputs. - Companies seeking efficient, low-energy, and durable turnkey solutions

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 Dkedpfx Asxm Uf Ssd Hoi • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Year of construction: 2025, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm. Dsdpfx Ao Snd Nod Hjki

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,250 kg, total width: 820 mm, total length: 1,650 mm, total height: 1,600 mm, cutting force: 100 t, cutting length (max.): 400 mm, pressure: 160 bar, warranty duration: 12 months, power: 7.5 kW (10.20 HP), MIZAR ALS Series | Hydraulic Alligator Shears High-Precision Hydraulic Cutting for Scrap Cables & Metals The MIZAR ALS Series is engineered for powerful and reliable hydraulic cutting of scrap cables, aluminum, copper, and various metal profiles. Designed for durability and operational safety, ALS shears deliver consistent cutting performance in demanding recycling environments. ENGINEERED FOR INDUSTRIAL PERFORMANCE Hydraulic Power Unit Equipped with a Bosch Rexroth hydraulic system to ensure stable pressure, smooth operation, and long service life. Hardened Cylinder Shafts Induction-hardened and chrome-plated cylinder shafts provide superior wear resistance and corrosion protection, ensuring long-term performance under heavy-duty conditions. High-Strength Blades Specially processed tool steel blades offer high cutting efficiency and extended blade lifetime, reducing maintenance frequency. Premium Electrical Components All electrical and electronic components are Siemens brand, ensuring operational reliability and global service availability. Certifications Manufactured in compliance with CE and EAC standards for international markets. APPLICATION AREAS • Scrap copper and aluminum cables • Aluminum profiles • Light metal scrap • Busbars and conductor bars • Industrial metal offcuts MODEL RANGE ALS S1 500 mm cutting blade length Compact and efficient solution for medium-capacity operations. ALS M1 600 mm cutting blade length Extended cutting capacity for larger cross-sections and higher throughput requirements. Why MIZAR ALS Series? • High hydraulic stability • Long blade lifetime • Low maintenance cost • Safe and operator-friendly design • Built for continuous industrial use Need a cutting solution tailored to your material type and capacity? Contact us for a customized quotation. Dkedpfx Ajd Exv Hjd Hsi Mizar Recycling Machinery

Condition: new, Year of construction: 2025, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, The ERP Series – Eco Recycling Plant is Mizar’s latest innovation in cable recycling, engineered to deliver maximum output with minimal energy consumption. This compact and high-performance system is built on two core components: the FGR – Fine Granulator and the DES – Densimetric Separator. Together, they offer an advanced, eco-friendly solution for high-purity metal and plastic separation. The ERP Series stands out with its low energy consumption, optimized material flow, and precise separation technology — all integrated within a space-saving design. Whether operating as a standalone system or as part of a larger line, ERP offers excellent efficiency without compromising quality. Operators benefit from a smart PLC-controlled touch-screen interface, allowing real-time monitoring and simple operation. All components are CE-certified and manufactured with high-grade materials to ensure long-term durability and performance. The ERP Series is available in three sizes to fit diverse operational needs: ERP S1 , ERP M1 , ERP L1 Dkjdpfjxb A S Njx Ad Hei With the ERP Series, you can achieve maximum recovery rates, superior material purity, and energy-efficient operation — all in one eco-conscious system.

Year of construction: 2025, condition: new, ⚡ Processing Capacity ✔️ Up to 400 kg/h Perfect for medium to high-volume operations. 🔁 Applicable Materials ✔️ All types of electrical cables ✔️ Mixed and contaminated cables ✔️ Complex, multi-layered cable structures 🔍 Included Machines & Functions Machine Functionality Shredder Primary size reduction for bulky cables Overbelt Magnetic Separator Ferrous metal removal with high-power magnets Granulator Fine and uniform size reduction Zigzag Separator Light/heavy fraction separation Densimetric Separator Density-based material classification Air Cyclone Separation of dust and light particles Turbo Mill Ultra-fine grinding for tough materials 🔄 Key Advantages 🧩 Modular Design: Each machine operates independently 📈 Scalability: Easily expandable and reconfigurable 🧪 High Purity Output: Precise and clean material separation 🌱 Sustainability: Energy-efficient and environmentally friendly 🔧 Easy Maintenance: User-friendly design and accessible parts 🎯 Designed For Recycling companies seeking maximum efficiency Businesses aiming for high purity and low loss rates Operators needing flexibility and growth options Dodpfxewnm Spe Ad Hoki

Condition: new, Year of construction: 2025, Set of cones(concave + mantle) Maxtrak 1000 Medium Coarse - very good quality. 22%Mn, with SPECTROMETER CERTIFICATE, highest quality on market! Dkjdpfeigvfvjx Ad Hsi Parts number: 603/9052-22 MC + 603/9106

Year of construction: 2025, condition: new, Overband magnet Length: 2500 mm Height: około 400 mm Width: 1000 mm Belt width: 750 mm Magnet width: 500 mm Magnet length: 1044 mm Power: 1,5 kW(hydraulic or electric) Djdpfjh U R Tgsx Ad Hski Magnet field: 400 Gauss(may catch 100 mm pieces from maximum distance 300 mm Overband new, 12 months warrenty,

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste Djdpju Dg Uhjfx Ad Heki non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: new, Year of construction: 2025, Mizar Compact Series Cable Recycling Machines are designed for the efficient recycling of cables of different diameters and materials. By breaking down cables, they separate metal and plastic components, ensuring maximum material recovery. ✅ Efficient Cable & Radiator Recycling – Effectively separates metal and plastic. ✅ Turbo Mill Technology (CMT Models) – Achieves higher purity by completely separating fine copper wires. ✅ Compact Design – Ideal for facilities with limited space. ✅ Energy Efficient & Cost-Effective – Minimizes operational costs. Dkjdpfx Aov Hbdrod Hsi 🔸 Recyclable Materials: ✔ Cable ✔ Radiator 🔸 Technical Specifications 🔹 CMT Power: 20 kW Granulator Motor: 11 kW Granulator Blade: 3+2 Length: 1300 mm Width: 1500 mm Height: 2140 mm Weight: 1380 kg

Condition: new, Year of construction: 2025, total width: 780 mm, total length: 1,240 mm, total height: 1,330 mm, overall weight: 480 kg, The CBR A3 Cable Stripping Machine is specially designed to strip the outer insulation material from cables of all sizes, making it easy to remove the conductive material inside. This series offers superior performance on; steel-armored cables (SWA), double steel-armored cables, steel tapes, PVC-coated cables, lead-coated cables, Dkedpfx Ajff H Imsd Hji thick rubber-coated cables, nylon-coated cables, low-grade cables, TT cables, and more. Specially processed blades with unique designs allow cables of any length to be cut and stripped for a long time without dulling the blades. All electrical and electronic components in the CBR A3 Series are Siemens brand. Our products are manufactured and certified in accordance with CE and EAC standards. Technical Specification POWER 5.5 KW CABLE DIMENSIONS 1-120 mm CUTTING SPEED 25 meter/min LENGTH 1240 mm WIDTH 780 mm HEIGHT 1330 mm WEIGHT 480 kg

Year of construction: 2025, condition: new, ⚡ Processing Capacity ✔️ Up to 800 kg/h Perfect for medium to high-volume operations. 🔁 Applicable Materials ✔️ All types of electrical cables ✔️ Mixed and contaminated cables ✔️ Complex, multi-layered cable structures 🔍 Included Machines & Functions Machine Functionality Shredder Primary size reduction for bulky cables Overbelt Magnetic Separator Ferrous metal removal with high-power magnets Granulator Fine and uniform size reduction Zigzag Separator Light/heavy fraction separation Densimetric Separator Density-based material classification Air Cyclone Separation of dust and light particles Dedpfx Adownnmbe Hjki Turbo Mill Ultra-fine grinding for tough materials 🔄 Key Advantages 🧩 Modular Design: Each machine operates independently 📈 Scalability: Easily expandable and reconfigurable 🧪 High Purity Output: Precise and clean material separation 🌱 Sustainability: Energy-efficient and environmentally friendly 🔧 Easy Maintenance: User-friendly design and accessible parts 🎯 Designed For Recycling companies seeking maximum efficiency Businesses aiming for high purity and low loss rates Operators needing flexibility and growth options

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: Dsdpoua D Aljfx Ad Hoki The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Dsdpfx Aeua Tbwsd Heki

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Dkedov I Skrjpfx Ad Hei Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!