Used Rinser for sale (123)

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Bodpfjtuyq Rex Ad Aelr

Condition: used, Non-returnable PET filling line, consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in 4x5 arrangement) - PET shredder (Strautmann BrikPress 240, year of construction 2019) - Crate washer with cleaning nozzles - Preform feeding device - Stretch blow-moulding machine (SIPA, type SFR 8 EVO, with 8 cavities) - Stretch blow-moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Premix system (Procomac Starmix, built in 2001, 200 hl/h) consisting of water deaeration, mixer and carbonisation with a total of 4 tanks and two cartridge filters for water treatment. - Velcorin dosage (dmt, Burdomat II G) - Capping task and cap conveying system - PET bottle rinser, filler and capper (Procomac) - Fill level control (Heuft Spectrum TX) with rejection - Labelling machine (P.E. Futura) for hotmelt labelling of wrap-around labels, in a block with dating (Videojet) - Crate packer (BMS) - Free, driven conveyor lines for bottles and crates Additional title: non-returnable PET filling Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Bsdow Uvd Tspfx Ad Aelr Features: Bottle ejector, crate washer, shredder, preform feeder, 2 x stretch blow moulder, premixer, velcorindosage, cap feeding and conveying, rinser/filler/capper, fill level control, labeller, dating, packer, Free crate and bottle transport

Condition: good (used), Work line incl. Meiko equipment Ideal for use in hospitals, retirement homes or sanatoriums. Everywhere where visually appealing products and good hygiene properties are required. Resistant to cold, heat, moisture and many chemicals. Wear and corrosion resistant. Blodpfx Adslikd Rs Ajr Features: -2 hinged doors, for quick access -1 large sink Dimensions approx. - Height 90 cm without backsplash - width 210 cm - depth 59 cm + MEIKO faeces flusher KD 40.1 Use: For cleaning of bedpans and urine bottles. -thermal disinfection -stainless steel front for easy disinfection -digital display with control panel Electrical connection: 230V / 50 Hz + MEIKO disinfection rinser Use: For rough cleaning of urine bottles and bedpans. During the rinsing process the faeces are rinsed off with a large amount of water under pressure. rinsed off under pressure. Item condition:used

Condition: used, Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Isobaric valve: No PLC type: Not Existing Spare parts available: No   Blodpfxsvguuko Ad Aor Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4) APE carton former with Nordson gluer 5) APE case packer 6) taping machine

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Bodpfx Aerqar Sod Aslr

Condition: used, Glass bottle filling line consisting of the following components: 1. Bottle washing machine (separate unit, Silmo, 1982) with a nominal capacity of 2,880 bottles/hour 2. Rinsing, filling, capping and labelling line (IC Filling Systems, 2020) with: - Bottle feed table - Rinser - Counterpressure filler - Capping machine - Bottle exterior washer - Cold glue labelling machine - Bottle discharge table - Free bottle transport Capacity appr.: 1100 bo/h referring to 0,33 l bottles Length: appr. 7 m Width: appr. 4 m Formats: Euro 0.5 l and 0.33 l; crown caps; wrap-around labels and belly labels Running direction: clockwise Bedpsw Ta Ndjfx Ad Aolr Base construction: Rinser, filler and capper as a monobloc Features: Bottle cleaning machine, bottle feeding table, rinser, filler, capper, bottle exterior washer, labeller, bottle discharge table, beer pump

Condition: used, Year of construction: 2003, operating hours: 10 h, Used Filling Monoblock CIMEC 6-6-1 1000 bph Technical Features and Specifications The Used Filling Monoblock CIMEC 6-6-1 1000 bph, model AMERICA DPS 6/6/1 EAGLE C, offers a versatile and reliable solution for isobaric bottling processes, specifically designed for beer production. Manufactured by the Italian company CIMEC in 2003, this monoblock integrates advanced features to ensure precision, quality, and operational safety. Structure and Configuration of the Monoblock The CIMEC 6-6-1 monoblock combines three key units into one compact structure: a rinser, an isobaric filler, and a capper. This configuration, therefore, optimizes line space and reduces processing time, ensuring a maximum output of 1000 bottles per hour (bph). Rinser: Equipped with 6 grippers for bottle holding and a single treatment with a fixed nozzle, it efficiently cleans the bottles before the filling process. Additionally, it ensures that no contaminants remain inside the containers, contributing to product purity. Bsdpsvy E Nlofx Ad Aelr Isobaric filler: The filling section includes 6 valves with 3 buttons, allowing controlled pressurized filling, ideal for beer and other carbonated beverages. Meanwhile, the pre-evacuation and leveling system reduces oxygen presence inside the container, preserving the product’s organoleptic properties. AROL Capper – Eagle C model: The capper handles 26 mm crown caps and operates with 1 capping head. As a result, it ensures precise capping, preventing leaks and contamination. Advanced Technical Features The Used Filling Monoblock CIMEC 6-6-1 1000 bph ensures high operational efficiency and precise process control. The isobaric technology, in contrast to standard gravity filling, maintains constant pressure inside the container during filling, avoiding foaming and guaranteeing accurate dosing. Pre-evacuation system: It eliminates air from the bottle before filling, thereby minimizing oxidation. Automatic leveling and degassing: This system ensures consistent product levels and removes excess gas, so the final seal remains airtight. Included Formats and Spare Parts The monoblock comes with false bottles, enabling cleaning and system testing without starting production. Furthermore, it includes two formats, both with a 65 mm diameter, suitable for standard beer bottles. In addition, the machine comes with two jack cylinders, allowing fast replacements and maintenance in case of wear. Safety Features of this Used Filling Monoblock for beer The monoblock includes technical manuals and integrated safety systems to protect operators and comply with current regulations. Each section features safety devices that prevent malfunctions and, thus, guarantee smooth operation. Specifically, safety guards, emergency stop buttons, and pressure monitoring ensure that any risk is minimized. Conclusion of this Used Filling Monoblock for beer The Used Filling Monoblock CIMEC 6-6-1 1000 bph offers a reliable solution for the beer industry, designed to maximize product quality and minimize downtime. Thus, it is ideal for breweries seeking enhanced productivity and consistency. Although older in manufacturing year, its robust build and spare parts availability extend its operational life. Overall, this monoblock embodies efficiency, precision, and adaptability, making it an excellent investment..

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Blodpfxetr R Tkj Ad Asr

Condition: used, Year of construction: 2015, operating hours: 44,747 h, Used filling monoblock Melegari up to 40000 bph In the industrial bottling landscape, notably, the Melegari filling monoblock model FILLJET NP-B 60-60-18 stands out. Designed to optimize production, it boasts a capacity of up to 30000 BPH. Furthermore, this analysis evaluates its technical specs, operational efficiency, and adaptability. It emphasizes its significant impact in still water bottling. Operational Efficiency and Production Capacity Bljdpfx Aovgt Ntod Aer Manufactured in 2015 and still operational, the machinery proves its durability and reliability. Importantly, it handles PET containers in 0.20 L, 0.33 L, and 0.6 L formats. Consequently, this allows significant versatility in product sizes. A speed of 40000 BPH indicates remarkable production efficiency, positioning it as a competitive option for high-volume facilities. Componentry and Technological Innovation The rinser of the Used filling monoblock Melegari up to 40000 bph incorporates 60 grippers for effective single treatment, ensuring container cleanliness before filling. Maintaining high hygienic standards is crucial for the water bottling sector. Additionally, the filler, with 60 volumetric valves and fixed nozzles, provides precise filling. This minimizes volume variations and reduces product waste. Moreover, the capper, with 18 heads for plastic screw caps, ensures secure, uniform closure. It integrates safety features, protecting both the operator and the product. Sustainability and Energy Consumption Operating at 380 V, 18 kW, and 60 Hz, the Filling monoblock Melegari signals optimized energy consumption. Its energy efficiency not only reduces environmental impact but also lowers operational costs. Dimensions, Weight, and Maintenance of teh Filling monoblock Melegari The dimensions of the Filling monoblock Melegari are 6100 mm (L) x 4700 mm (W) x 3600 mm (H), with a weight of 12000 kg. The monoblock requires careful space planning. Additionally, clockwise rotation and detailed manuals facilitate maintenance, ensuring extended operational longevity. Conclusion of the Filling monoblock Melegari This analysis of the Melegari filling monoblock up to 40000 bph highlights its status as an advanced solution. By combining high production capacity, precision filling, energy efficiency, and ease of maintenance, it becomes highly attractive. Ultimately, it’s ideal for optimizing production with a focus on sustainability and cost reduction.

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Bljdsuch Tmepfx Ad Ajr

Condition: used, Year of construction: 1999, Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph This Used Rinser  not only delivers high efficiency but also ensures excellent performance for bottle rinsing. Procomac manufactured this system in 1999, and designed it to operate at a maximum speed of 6000 bottles per hour (BPH). As a result, this setup guarantees optimal performance in production lines. The rinser handles bottle formats ranging from 0.20 to 1.5 liters, providing versatility and adaptability in different production settings. Furthermore, its robust construction adds to its overall efficiency. Technical Features of the Rinsing Machine PROCOMAC Gripstar The Gripstar rinser features 32 grippers that operate in a clockwise rotation. Consequently, this design stabilizes the bottles during the rinsing process and reduces the risk of damage or malfunction. In addition, the system incorporates fixed nozzles, which simplify maintenance and minimize wear over time. Moreover, this technical setup improves the longevity of the machine, making it a reliable choice for high-speed operations. Types of Treatment and Configuration The machine supports a single treatment cycle, allowing it to perform rinsing using either water or air. This is important because it makes the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph suitable for a wide range of products, from food-grade liquids to cosmetics. Additionally, its modular configuration enables seamless integration into existing production lines without requiring significant structural changes. Thus, it offers flexibility in various production environments. Therefore, manufacturers can easily adopt it even in complex setups. Operating Conditions and Current Status Bjdpfx Asvgvipod Aslr The Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph remains stored in excellent condition, ensuring it is fully operational once installed. Despite the fact that the machine dates back to 1999, proper storage has preserved its functionality. Because of its durable design, it will continue to deliver reliable performance for years. Moreover, the use of standard components simplifies maintenance and part replacement, which helps reduce downtime as well as operating costs. In other words, the machine is built to last and operate efficiently under various conditions. Electrical Data and Energy Consumption This machine runs on 415 volts, consuming 3.1 kW of power at a frequency of 50 Hz. The machine draws 5.4 amps, ensuring energy efficiency compared to similar models. Thus, these specifications make the system compatible with most industrial electrical infrastructures. As a result, the machine ensures smooth installation while minimizing energy costs. In addition to its energy-saving features, the machine supports a sustainable production process. Conclusion of the Rinsing Machine PROCOMAC Gripstar In summary, the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph offers reliability and speed, making it an excellent choice for bottling lines.

Condition: used, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Bodpfx Aevgvwmjd Aslr Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. Bedpevgt Upofx Ad Aslr M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Gea Procomac Used Complete Bottling Line Blodpfx Aovguibsd Asr These are machines that are part of a bottling line having the following characteristics. • Bottling line speed: 7,000 / 8,000 bt/h of 75 cl sparkling wine and 10,000 / 11,000 bt/h of 75 cl still wine • Bottling line designed for the bottling of the following formats: 20cl – 37.5cl – 75cl – 150cl Below is the year of manufacture for each piece of equipment with the relative sale price: 1. Bortolin-Kemo depalletiser – year of commissioning: 1993 Filling 2. Gea Procomac filling monoblock – year of commissioning: 2000 Including: Gea Procomac rinser – 54 taps Ozosteril Gea Procomac for the production of ozonated water to be used in rinsers – year of commissioning: 1993 Gea Procomac isobaric filler – 56 taps Cork capper Arol – 8 heads (set of mouthpieces for mushroom cap and set of mouthpieces for flat cap) Arol screw capper – 8 heads (set of cap heads: stelvin 30×60, screw 31.5×18, screw 15×18 for sparkling wine 20cl) Microfiltration 3. Gea Procomac microfiltration plant – year of commissioning: 2000 Divided into: Uniflux (Microfiltration plant) Unitherm (Wine pumping system) – Inverter controlled lobe pump to feed the filler Packing 4. Bortolin-Kemo packing machine – year of commissioning: 2002 5. Bortolin-Kemo carton erector – year of commissioning: 1993 6. Bortolin-Kemo divider inserter – year of commissioning: 1993 7. Bortolin-Kemo top gluer – year of commissioning: 1993 8. Bortolin-Kemo palletizer – year of commissioning: 1993 With matched: 9,Padding system Tosa – year of commissioning: 2007 10. Tosa pallet wrapper – year of commissioning: 1998 Gea Procomac Used Complete Bottling Line Gea Procomac Used Complete Bottling Line, mixed line with bortolin kemo machinery in excellent condition. We are here at your disposal for any information do not hesitate to contact us

Condition: used, Used Complete Bottling Line Procomac 2000 1. Blow-mouldingmachine Typ SIPA SF12/8 (2002) 2. Chillerfor SIPA machine (2002) 3. Compressor Typ Kaeser (2002) includes: Air receiver 1000 liter, 16 bar, Mikrofilter/Carbonfilter, Screw-compressor CS121/12 bar Air receiver 1000 liter, 45 bar, Pre-filter HP-Compressor (Booster) N753-G HP- Airdryer THP 142 48 Microfilter, Carbonfilter Bodpjvgulcofx Ad Ajlr 4. 40m Airconveyor Typ Procomac (2002) 5. Rinser-Filler-Capper24/24/6 Typ ProcomacMuvitec(2000) Capper also for sports-cap incl. 6. Labellingmachine Type Futura, hotglue (2000) 7. Bottleinspector Type Logis&Controls (2000) 8. Bottle transporter Krones (speed-controled) (2000) 9. Handle Applicator Twinpack (2000) 10. Packingmachine & Shrinktunnel Kettner (2001) 11. Packing-robot Profipac (2005) 12. Wrappingmachine Robotec (2002) Formats 1. O.5 liter bottle height 220mm Diameter 66mm Label 215 x 70mm 2. 1.5 liter bottle height 334 mm Diameter 95 mm Label 285 x 100mm

Condition: used, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production. Bsdpfjvgu Tyjx Ad Aslr

Condition: used, Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10,800 cph represents indeed a reliable and efficient solution for industrial bottling operations. Equipped with specialized and high-quality equipment, this line is meticulously designed to maximize productivity and ensure in fact optimal results. CFT Empty Can Twist Rinser- Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans. Moreover, with its dual can rinser system and spare parts sets for 0.35L  and 0.47L aluminum cans, it ensures flexible operation tailored to specific production needs. Additionally, the rinse process guarantees pristine can surfaces, vital for maintaining product integrity. CFT 20 Valve Can Filler – Seamer of the Used filling line CFT for cans up to 10800 cph The 2013 model RS20 CFT 20-valve can filler with seamer ensures precise and rapid filling of cans. Featuring advanced technology and integrated sealing, it guarantees hermetic and secure closure for product preservation and quality. Furthermore, the filler’s seamless integration with the seamer streamlines the production process, minimizing downtime and maximizing efficiency. Conveyor & Automation Stainless Steel Full Can Conveyors The conveyor and automation system of the Used filling line CFT for cans up to 10800 cph includes stainless steel conveyors, facilitating without a doubt efficient transport of cans along the production line. Robust and reliable, it ensures continuous and uninterrupted flow. Additionally, the conveyor’s modular design allows for easy customization and expansion to meet evolving production demands. Carleton Helical Technologies Can Invert / Re-vert System The Carleton Helical Technologies can invert/revert system ensures a seamless and uninterrupted flow along the production line, thereby optimizing efficiency. Furthermore, the system’s innovative design minimizes the risk of jams or blockages, enhancing overall operational reliability. Videojet Ink Jet Coder The Videojet ink jet coder ensures clear and precise marking on each can, enhancing traceability and quality control measures. Moreover, the coder’s high-speed capabilities enable swift marking without compromising accuracy, contributing to streamlined production processes. Bodpowbfh Nsfx Ad Aslr In-Line Pressure Sensitive Wrap Around Labeler The in-line pressure-sensitive wrap-around labeler of this CFT Canning Line, specifically the Paradigm 700 model, ensures swift and accurate label application, enhancing product presentation and brand visibility. Additionally, the labeler’s adaptable design accommodates various label sizes and shapes, providing versatility for diverse packaging requirements. Stainless Steel Flow-through Conveyor Table The stainless steel flow-through conveyor table with a plastic mattop belt of the CFT Canning Line guarantees continuous and uninterrupted flow along the production line, facilitating smooth operation.

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion Blodowr T E Dopfx Ad Asr In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: used, Used filling line for beer in cans 25000 cph The used filling line for beer in cans 25000 cph delivers high-speed beer canning across multiple formats. Specifically, it fills 500 ml, 440 ml, and 330 ml cans with standard 202 lids, consistently reaching a capacity of 25,000 cans per hour. Although the line remains installed, it is currently not operational. Nevertheless, all components remain in excellent working condition. Empty can feeding system To begin with, a Linker DPG-500 depalletizer, built in 2012, unloads empty cans at the start of the line. Subsequently, rope conveyors from Linker (model RC/KHS, 2012) transport the cans to a Triplexrinser TR/KHS rinser, also from 2012. In this section, the system moves cans smoothly and prepares them efficiently for the next stage. As a result, the line ensures gentle handling while maintaining productivity. Bjdpfxsw Ahfao Ad Aolr Filling and seaming Next, the KHS Innofill DVD 60 filler, installed in 2017, performs the filling process using 60 dedicated valves. In parallel, a Ferrum F08 seamer seals the cans, while an NSM 30A lid feeder supplies lids with precision. Consequently, this configuration ensures accurate dosing and secure sealing at high throughput. Notably, the filling and seaming block is among the most recent upgrades to the line. Pasteurization and quality control After sealing, the product passes through a KHS Innopro KZE flash pasteurizer, installed in 2017. Additionally, this unit includes a 5000-liter buffer tank to stabilize the process. Meanwhile, a KHS Innocheck fill level inspector (2012) continuously monitors the liquid level in each can. In doing so, it guarantees compliance with rigorous quality standards. Therefore, the pasteurization and inspection phases preserve both safety and consistency. Secondary packaging and handle application Once the cans are processed, a KHS Innopack Kisters SP 050 B2 multipack packer (2012) wraps them using shrink film—either printed or transparent. It operates on a double-lane system at 50 cycles per minute. Moreover, a KHS CSM 050-02 handle applicator (2011) applies handles at the same speed, which facilitates later transport. In other words, the secondary packaging setup optimizes the line for retail and logistics needs. Tray packing and shrink wrapping Following multipacking, the line uses a KHS Innopack Kisters TP 035 B2 tray packer (2012) to place packs into trays at 35 cycles per minute. Then, a KHS Innopack Kisters FS-AL shrink wrapper (2017) applies shrink film to stabilize the load. Thus, the packs remain secure and compact throughout distribution. Furthermore, both machines maintain high reliability under continuous operation. Palletizing and end-of-line operations At the end of the line, a KHS Innopal MPH 1-1 palletizer (2012) stacks trays without using interlayers. This simplifies the palletizing process while saving materials. Subsequently, a Fiat MFP pallet wrapper (2017) secures the stacked trays with stretch film.

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum Bjdpfx Adjw Tlz Eo Aslr The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: used, Used bottling line SPECIJALKA for carbonated beverages 3000bph The SPECIJALKA used bottling line for carbonated beverages at 3000 bottles per hour integrates a rinser, a filler, and a capper. Moreover, this machine fills bottles of various capacities, using both PET and glass. The technical specifications therefore clearly address the needs of technicians and experts in the bottling industry. Main technical features of the Bottling Line SPECIJALKA The Bottling Line SPECIJALKA operates with 32 filling valves, producing around 2500 bottles per hour for 2.0-liter bottles and up to 3000 bottles per hour for bottles between 0.5 and 1.5 liters. The 28 mm bottle neck works well for both PET and glass. As a result, this versatility allows easy adaptation to different production needs. The capper, which uses 8 heads, simultaneously applies 28 mm plastic caps quickly and precisely. Labeler and saturation system The line uses a linear labeler to apply nylon labels with speed and precision, optimizing the labeling process. Additionally, it includes a saturator/mixer that ensures efficient carbonation, delivering the right amount of CO2 in each product. Furthermore, the combination of these features improves the overall performance of the system. Blsdovgvdgjpfx Ad Ajr Usage and maintenance status The machine has remained unused, and since 2008, we have kept it overhauled and serviced to maintain its perfect condition. Currently, we store it in a ready-to-use state. The installation of this bottling line requires approximately 200 square meters of space. Thus, this ensures an optimal arrangement of the components. Rinser and filler The rinser  of the Bottling Line SPECIJALKA operates with 20 heads and secures the bottles under the neck to prevent damage during washing. Consequently, this method prepares the bottles for filling. The filler, equipped with 32 valves, fills the bottles quickly and accurately, enhancing production efficiency and reducing product waste. Therefore, this process improves both speed and quality in the bottling operation. Conclusion of the Bottling Line SPECIJALKA The SPECIJALKA used bottling line for carbonated beverages at 3000 bottles per hour offers a complete, versatile solution for high-scale production. It handles both PET and glass bottles while providing an efficient labeling system. In conclusion, it presents an excellent choice for companies aiming to boost production without sacrificing quality. Ultimately, this system increases operational efficiency while maintaining flexibility in production requirements.

Condition: used, Year of construction: 1998, Used Filling Monoblock OCIM 24-32-8 up to 10000 bph The OCIM 24-32-8 filling monoblock stands as a pinnacle in bottling technology. It offers an unparalleled capacity of up to 10000 bottles per hour. Crafted by OCIM in 1998, this machinery embodies reliability and efficiency. Specifically designed to cater to the demands of filling glass containers, particularly those housing oil products. Technical Details At the heart of this monoblock lies its rinser, equipped with 24 grippers meticulously engineered to ensure a secure hold on the containers. Operating with precision, the rinser utilizes compressed air for treatment, guaranteeing optimal cleanliness throughout the filling process. Moving seamlessly to the filler, which serves as the core component of the monoblock, we encounter a marvel of engineering. Boasting 32 filling valves, this monoblock is capable of handling even the most demanding bottling tasks with ease. Whether employing gravity or a light depression technique, the filler ensures a uniform and efficient distribution of the product, thanks to its fixed nozzle design. Completing the trifecta of functionality is the capper, a critical element in the sealing process. Configured to accommodate aluminum screw caps, the capper features 8 heads operating in harmonious synchronization, rotating clockwise to securely seal each bottle. Current State and Storage Despite its formidable capabilities, the OCIM 24-32-8 filling monoblock currently resides in storage, patiently awaiting its moment to shine. Safeguarded against the ravages of time, it stands as a testament to precision engineering. It is preserved to maintain its integrity and performance. Application and Benefits When deployed, this monoblock transcends mere machinery, becoming the cornerstone of efficient bottling operations. With a capacity of up to 10000 bottles per hour, it revolutionizes production processes. This enables manufacturers to meet the demands of a dynamic market with unparalleled speed and precision. Furthermore, the OCIM 24-32-8 filling monoblock offers tangible benefits beyond its impressive throughput. Its reliability minimizes downtime, ensuring continuous operation and maximizing productivity. Moreover, its versatility allows for seamless adaptation to various bottling requirements, making it a versatile asset in the hands of discerning manufacturers. Bljdpfxjvgvufj Ad Aor Conclusion of the Used Filling Monoblock OCIM 24-32-8 up to 10000 bph In conclusion, the Used Filling Monoblock OCIM 24-32-8 represents the epitome of excellence in bottling technology. With its robust construction, innovative features, and unparalleled performance, it stands as a testament to OCIM’s commitment to quality and innovation. Whether in storage or in operation, this monoblock remains a beacon of efficiency, poised to elevate bottling operations to new heights of success.

Condition: used, Year of construction: 1990, Used Overhauled Rinsing Machine The Used Overhauled Rinsing Machine Virmauri rinsing machine, built in 1990 and overhauled, is an industrial machine dedicated to the treatment of glass containers. With an operating capacity of 7000 bottles per hour (BPH), the device implements a system of 28 grippers for the optimization of rinsing processes. Operating clockwise, this unit features movable nozzles, allowing flexibility in specific treatment for each container. Mechanics and Operation Bsdpfxjvgvwaj Ad Ajlr Focusing on mechanics, the device adopts a single-step treatment approach, using water as the main cleaning agent. This choice, while simplifying the process, imposes stringent requirements on the quality of the water used and on the maintenance of the nozzles to prevent cross-contamination. The clockwise rotation direction and the arrangement of the sockets have been designed to optimize the workflow and minimize downtime during production batch changes. These technical aspects require careful evaluation when integrating the machine into existing production lines. Current Status and Maintenance of Used Overhauled Rinsing Machine Regarding the current status of Virmauri, the used overhouled rinsing machine is classified “On stock”, indicating immediate availability for installation and use post-overhaul. The Used Overhauled Rinsing Machine has undergone an overhaul process to ensure its functionality and reliability over time. Maintenance management requires a meticulous approach to ensure the availability of spare parts and the technical competence for rapid interventions. Conclusions of Virmauri rinser equipment: In conclusion, the 1990 Virmauri rinser, with 28 grippers and a capacity of 7000 BPH, represents a technologically viable option for companies in the bottling industry that need an efficient and reliable unit for processing glass containers. The decision to acquire a machine of this nature requires a detailed analysis of your production needs, compatibility with existing lines and internal maintenance capabilities, to ensure optimal integration and operation. We can assure full service on this Virmauri equipment with our staff.

Condition: used, Year of construction: 2018, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Bodpfsvhcplox Ad Aelr Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines.

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Bsdewr T Ewopfx Ad Ajlr Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.