Used Road Construction Machinery for sale (80,566)

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Rodpfx Aox Axbcsbdsp

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Rjdpop R Iwhofx Abdop

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Redpfxoiv R Hhe Abdop Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Rjdpfx Aof Hkgpsbdop Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler Redpfsyh Ri Iex Abdep - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Year of construction: 2018, condition: as good as new (ex-display), Offer here as new machine for gluing shafts including corner gluing machine and many high quality tools. Box sizes: Minimum: 80x65x10 mm Maximum: 430x350x120 mm Rodpfjg U Irwjx Abdep More details and price after personal consultation

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 30 rpm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, input voltage: 380 V, controller manufacturer: Fagor, controller model: 8055/FL 1 Jahr alt, Equipment: documentation/manual, Microcut / Buffalo Machinery Company Limited CV-850 Year of manufacture: 2002 Control: Fagor 8055/FL, 1 year old Travel paths: X – 850 Y – 500 Z – 450 Rjdpfxeyhbw Eo Abdsp Voltage: 400V Power: 56 kW Spindle speed: 30 – 1200 Table size: 900x530 mm T-slots: 14 mm wide, spaced at 60 mm Table load capacity: max. 400 kg A wide range of tool holders and tools included! Price is net plus VAT:

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Redpfx Abjx E Utiodep Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Condition: like new (used), Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed. Rodpfsdz Tcbsx Abdjp

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231432, CNC short turning machine – Citizen Miyano BNE-51MSY Year of manufacture: 2018 Condition: Very good, fully operational Availability: At short notice Brief description For sale is a Citizen Miyano BNE-51MSY CNC short turning lathe in MSY configuration featuring main and counter spindles, as well as a Y-axis. This machine is ideal for precise and cost-effective complete machining of complex turned and milled parts in series production. Equipment / Highlights - Fixed headstock (short turning) - Main spindle + counter spindle - Y-axis - 2 tool turrets, each with 12 stations - Driven tools - Simultaneous machining capability - High rigidity and process reliability Technical data - Max. bar capacity: Ø 51 mm - Max. turning diameter: approx. 165 mm - Max. turning length: approx. 380 mm - Main spindle speed: up to approx. 5,000 rpm - Counter spindle speed: up to approx. 5,000 rpm - Control: Mitsubishi MELDAS Rjdpfsx Tg Sgex Abdsp - Machine weight: approx. 8,000 kg The machine is fully functional, both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale!

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW Redpfx Abeyhhx Asdep • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: new, Year of construction: 2023, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 540 mm, workpiece weight (max.): 6 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, spindle speed (max.): 12,000 rpm, table load: 500 kg, YCM vertical machining center model NXV-1020A Fanuc control MXP-300FB+ Screen size 15" 12,000 revolutions 30 tools 20 bar internal cooling Hinged belt chip conveyor Spindle oil cooler Oil separator Rodsrfdckspfx Abdsp Steep taper 40 - DIN-69871A or BBT-40 Machine-side cable preparation for 4th axis connection Demonstration machine at a special price Sale only possible in Germany and Austria

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Rjdpfxoq E Ti Hj Abdjp

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € 2025 mm Rodpfx Abewiq Iwjdjp 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: HU50610, Controller 15" touch screen with Windows Operation System Interface Table size 630 x 360 mm Dimension of tank LxWxH = 940 x 550 x 350 mm X travel 400 mm Y travel 300 mm Z travel 300 mm Distance between the table and chuck 100 ~ 400 mm Max weight of electrode 11/50 kgs Max weight of wpc on table 500 kgs Max Output power 50A Best surface quality of work 0,08 Ra Input power 10 kVA Dielectric capacity 300 litre Dimensions of the machine LxWxH = 1320 x 1380 x 2150 mm Weight 1450 kgs Accessories, features - No. of filters 3 pcs. - C axis (max loading 11 kg) - Dielectrictank Rsdpowktkkofx Abdop - Machine mouths - Manuals - Handtools

Condition: new, Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Redpjrxtwdefx Abdsp Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg The price is 23100 Eur

Condition: new, Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Rjdjrxtvkjpfx Abdsp Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 3100 kg The price is 24500 Eur

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Model: PE500/300 Fully tested Purchased and installed for a trail product, no longer needed. Comes with new replacement belts Rodpjxrcyzjfx Abdep Located in Leek, UK

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Rsdpfx Absxrcyuodep Model: PE500/300 Fully tested Purchased and installed for a trail product, no longer needed. Comes with new replacement belts Located in Leek, UK

Condition: good (used), Year of construction: 2018, functionality: fully functional, Controller FANUC MXP-200FC Table size D380 mm Table load max 200 kg X travel 700 mm Y travel 520 mm Z travel 480 mm A axis +30/-120 degree Rsdpfx Abjr I Az Tsdsp C axis 0-360 degree Spindle speed 12000 rpm Tool holder type BBT40 Rapid speed 36/36/24 m/min Feedrate 1 - 100000 mm/min Max tool diameter and length D78 x 280 mm Max tool weight 6 kgs Spindle power 22,5 kW ATC magazin 30-fold Power required 46 kVA Accessories, features - CTS - integrated 4/5 axis - Coolant unit - Chip conveyor - Mist collector - external hydraulic - manuals The machine is still under power and can be inspected in function. Ready to buy.

Year of construction: 2026, condition: new, functionality: fully functional, Belt press POWERPRESS 300 is designed for pressing fruit, berry and vegetable mash. Fruit mash is supplied on the belt which presses it against shafts. The obtained juice flows into a small collection tank under the press with filtration sieve on top. Then the external pump or juice collection tank with pump transfers the juice from the press to a desired storage tank or straight to ROCKET pasteurizer for further processing. The pressing process is continuous. Capacity: 300 kg/h The most cost-efficient belt press in the market! The most evolutionary feature of our Belt press POWERPRESS 300 is one huge pressing shaft, which lets the machine to maintain the longer pressing time (belt length is 4900 mm) and huge shaft dimensions squeezes the juice efficiently by saving the costs and space. The juice yield of apples using our belt press is ~65-75 %. The yield highly depends on freshness and variety of fruits. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 300 filtrates the juice even during the pressing stage providing cleaner and purer product. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves service costs. Adjustable fruit inlet lever lets fruit mash supply onto the shaft easily. Rjdpfxjt Rft Us Abdep Crushed fruit mash can be supplied from MAXIMILL or straight from a bucket or basket. After work, belt press should be manually washed with a water stream. A full washing process takes around 15 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. The machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2026, condition: new, Machine provides fully automatic filling process for webbed Bag in Box bags. After inserting the first bag, machine removes the cap, fills the liquid and caps the bag. Then it releases the filled bag and takes another one for filling. This way the filling process is continuous and operator only needs to take the filled bag out of machine. To fill separate Bag in Box or Pouch bags, insert a package into the filler and press START button – machine automatically removes the tap, vacuums the bag, fills it with liquid and closes the bag. Rsdpfxjq Nl A Rs Abdep Capacity: ~2000 l/h -Perfect for filling various liquids: from juice, wine, milk to broth, oil, soap, etc. -Easy-to-use mechanism does all the work automatically. In addition to that, bags can be supplied to machine manually (separate bags or pouches) or automatically (bags in web). -Suitable for both hot and cold filling. -Machine fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. -Machine fills packages with tap closure. It is also possible to fill packages with different closures on request. -Laser safety mechanism protects limbs by automatically stopping & cancelling the filling process in case of an accident. -Machine is made from stainless steel materials (AISI 304). -Touch-screen control panel and multi-language menu grant easier work. -The error of repeatability of volumes is only ± 0,3 %. -Additional filling table is possible, which slides beneath the main table for filling bags of bigger volume (from 20 to 30 L). -The filler is easy to clean after work with external and CIP cleaning. -Working surface of the table consists of conveyor rollers which are exceptionally easy to clean. -All parts have IP 65 water protection.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. Rsdpfxoq Nl Aqe Abdop -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: new, Year of construction: 2026, The Mobile Fruit Processing Line is designed to conveniently accommodate all the machines necessary for juice production and a smooth work process. It contains: -Fruit and vegetable washer elevator mill MAXIMILL 3000 -Belt press POWERPRESS 1500 -Transporter for leftover mash -Stainless steel tanks -Diesel pasteurizer -Semi-automatic Bag in Box filler -Juice filters -Sink with a stainless steel table Capacity: 1500 kg/h. Other available capacities: 400 kg/h, 800 kg/h, 1200 kg/h. Features: -The mobile juice line conveniently contains all the machines required for fruit processing & juice production. -Requires only 1 person to operate the whole line. Rodpfxeq Nl Afs Abdjp -Mobility is the biggest advantage which eliminates costs for premises and provides the ability to change location. -The juice yield from apples is ~75 % . -All machines are interconnected and controlled automatically. -The mobile juice production unit includes a Bag in Box filler which fills the juice into both Bag in Box and Stand up Pouch packages. -The mobile juice line can be customized on client’s request. -The line is easy to operate and maintain. -The mobile fruit processing line is installed in a specially made trailer which can be easily opened for work and shut when needed. -The biggest advantage of our Mobile Fruit Processing Line is the ability to produce juice anywhere you like. This way the client avoids additional expenses for premises and gets the ability to change work location. Mobility is the key aspect here which provides the client with more possibilities, such as developing a juice pressing service business at various apple farms or different towns.

Year of construction: 2026, condition: new, Pasteurizer-Filler Rocket is used for the pasteurization of juice and other liquid products and filling it to bottles or Bag in Box packaging. The machine has a built-in heating boiler. Inside of it there is a tubular heating spiral made from stainless steel. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. If the boiler temperature rises more than set, an automatic temperature sensor turns off the heaters. Juice temperature is monitored manually. Rjdpeq Nlz Tofx Abdsp Capacity: 150 – 200 l/h Maximum heating temperature – 90 ºC. -A tubular spiral made of hygienic thin-walled stainless steel. -Spiral is integrated into the boiler which provides saving of space and prevention of heat loss when pumping the water into external heat exchanger. This saves the heating energy up to 15-20%. -Pasteurizer has an automatic water temperature control with a digital thermostat. -Safety sensors for dry run protection. Pasteurizer does not start until the water level is correct. -Easily interchangeable filling heads to Bag in Box or bottle. -Bag in Box filling table with scales for weight monitoring. -Bag in Box closing handle is moved by a spring – this ease the opening and closing process. -Automatic bottle filling – filling will stop when bottle is full. -Bottle filling table is adjustable according to bottle dimensions. -Manual juice temperature monitoring by digital thermometer. -Fast and easy cleaning.