Used Rotary Tedders for sale (3,994)

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, hydraulic oil capacity, coolant system, lubrication oil capacity, central lubrication system, control panel channel, workpiece magazine, linear transfer system, hammer unit, cutting tool, hydraulic feed unit, hydraulic control system, electrical control system, operating hours: 77,107h. Documentation available. On site inspection is possible. Knjdpfx Afezkvlhswoa

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Kedpfx Aeu T Rhbjfwona

Condition: ready for operation (used), A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transfer. 7) Hydraulic system. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interlinked system for NC control valve production. The production of additional components can presumably be set up. Documentation available. An on-site inspection is possible. Ksdpfx Aszbl N Sofwona

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, Rev. Speed: 9 revs/min Height: 900 mm (35.43 in), adjustable ±50 mm (±1.97 in) Diameter: Ø 1150 mm (45.27 in) Electricity supply: 250 W, 1 A, 230 V, 1 Ph, 50 Hz (110 VAC, 2 Amps, 60 Hz) Castor wheels with brakes Load: 80 kg (176 lbs) Ksdpfxjtp I Dce Afwena Materials used: stainless steel AISI304, food grade ALU and PE CE marking

Year of construction: 2021, condition: used, empty load weight: 9 kg, Used battery combi hammer for sale: Kedpfx Afezqhp Eowsna Ideal for heavy work. Not dependent on mains power. Year of construction: 2021 incl. 2 batteries (12ah), charger and case. Drilling and breaking. 3 speeds. Price: € 750,- incl. VAT Several in stock!

Condition: good (used), Choice of 40” drums to make products such as hash browns, potato waffles etc. Please note that the triangle hash brown unit has now been sold (August 2025) Knedpfx Afsqpd Ttewea

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility. Kjdpfxex Dcdke Afwjna

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. Knedpfx Afjxz E Ndjwja This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility.

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. Kodpfxjhyucho Afwena

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with a GlobeTech tub lidding machine which worked in line with it. Knsdpfx Aepfdhpefwsa

Condition: excellent (used), Year of construction: 2014, Rarely available for sale, GEA Comas Tartomatic 1000 in beautiful condition. Has not been used very much. Comes with many accessories as shown in the photographs. Kodpfx Afovd Elnewena

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Kodpfxjrdzbtj Afwona

Condition: good (used), Regal Trepko rotary pot filler and sealer. Was previously used in a UK factory packing dairy products like yoghurts, cream, sauces etc. Knjdpfepgqtzox Afwja

Condition: good (used), Rotary pouch filler vacuum sealer. Was packing long life retorted meals in pouches for the armed forces. Knsdpoyh Rczsfx Afwoa

Condition: excellent (used), Very nice 8 rack oven, perfect for cooking proteins. Direct from recently closed factory. Knsdpoqx A H Aefx Afwsa

Condition: used, functionality: fully functional, Alfa Laval TJ20G Rotary Jet Head 316L Stainless Steel 1½" Kjdpfx Aozlqnyjfwsna Jet head's were removed from process in 2023 and kept as spares. In good condition. We have up to 8 of these available. Contact us for more information

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) Knedpsl Dn N Sofx Afwea min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s Ksdpfx Ajh Itu Esfwjna - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Year of construction: 1986, condition: used, Standard features Kodpfx Asbi Uwfefwona

Condition: good (used), Size: max 530 x 530 x 527 mm min 135 x 135 x 170 mm Product thickness: max 15 mm Cutting width: max 0-60 mm Knsdpfxod R Tgzo Afwja Equipment: • infeed unit with degree bumbers • cutting unit • 1 st cut station RS 173/530 • 2 nd cut station RS 133/530 • bump turn 1530

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm Kjdpozpbrqjfx Afwjna - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Knsdpfx Afjya Dtmjwsa

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine Kedjd E A I Nepfx Afwena - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Knsdju Tln Nspfx Afwea Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 2012, condition: ready for operation (used), Max. load: 2.5t, connected load: 4kW, weight: 1.477t. Kodpelyrz Iofx Afwsna