Used Rotary Tedders for sale (3,613)

Condition: used, Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0,5 mbar Bodsdnu T Rjpfx Al Iodb Motor: 15KW Status: used, tested! The general overhaul for the device is offered separately! Included: oil filling, vacuum suction filter Delivery time: ex stock!

Condition: used, Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Type: Sogevac SV100 Voltage: 50/60Hz 230-400/460V N. suction capacity: 100 m³/h Ultimate pressure without gas bellows: approx. 0.1 mbar (99.9% vacuum) Status: Overhauled Bodpfx Alob Rnffs Iedb Warranty: 12 months Instruction manual with first file list Delivery time: after arrangement

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Bedpfx Alel D T D Te Iedb Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available CEE machine, incl. complete documentation

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 61062, bar passage: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar loader Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control system: Siemens S7-200 Drive for parting unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtering system (Knoll FKA 150) Scraper conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure intensifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air service unit DA 300 Clamping plate for chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear transmission Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for empty stations Material stop (stroke: 60 mm) Parting unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC-axis Device for rinsing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details about the machine can be found in the attached documents. Bdodpfx Alsyx Ia Ns Ijb

Condition: used, MIKRON Multistar CX-24 / 1500 is a Rotary transfer machine of high precision, engineered for superior accuracy and reliability. Capacities: 24 stations; max. no. of upper stations 23, lower 22, side 22; workpiece diameter up to 24 mm; production 70 pce/min (multiple-cycle 280 pce/min). Key specs: spindle speeds 500–32,000 t/min; voltage 50 Hz 3x 400 V; air connect 6 bar; machine weight ~3500 kg; control cabinet ~1200 kg. Capable of achieving tight tolerances; typical applications include automotive, aerospace, medical, watchmaking and machine tools Bdodpfoyxny Njx Al Ieb

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Bsdpfx Aljylpvdj Iedb Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 12668, Used Martin Christ “Rotary Vacuum Concentrator” 2-25 Manufacturer: Christ Model: RVC 2-25 Voltage: 230 V (50 Hz) Bdsdpjyvq A Isfx Al Ieb

Condition: good (used), Year of construction: 2013, Rotary oven Hein Luxrotor - model LR 108 HD - Ecostone - year of manufacture 2013 - for trays 60x100 or 80x100 - oil or gas burner - computer control - oven from ongoing production Bdjdpfx Alsx Rbqfs Ieb - collection from warehouse / shipping option available - price on request

Year of construction: 2015, condition: reconditioned (used), Rotary oven Hein Luxrotor - Model Ecostone - used - year of manufacture 2015 Bjdpeyfpv Defx Al Ijdb - for trays 60x80 - electronic control - ceramic wall - gas or oil burner - overhauled - 1 trolley - warranty - price on request

Condition: excellent (used), Year of construction: 2013, Hein Luxrotor rotary oven - used Bdodpjxy Rbiofx Al Ieb - year of manufacture: 2013 - suitable for 58x98 trays - electric - power approx. 70 kW - computer control with touchscreen - extractor hood with fan - ceramic wall - 1 rack trolley - top locking system for trolley - good technical condition / device checked and cleaned - collection from warehouse - price on request

Year of construction: 2010, condition: excellent (used), Wachtel Compact 1.8 rotary stove - used - year of production 2010 - with STIR system Bedpfergn Tvsx Al Isdb - gas burner - for metal sheets 58 x 78 - fully assembled - digital control - good technical condition - 3 pieces on offer - Price for inquiry

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 x Laser s.r.l. rotary biscuit moulding machine, used to deposit biscuits onto 18'' x 30'' baking trays. NEVER USED IN PRODUCTION. Model - RM-50-ST. Serial number - RMST.1774.06. Date of manufacture - 2006 (never used). Production speed - 4 to 14 pans / minute. Production capacity - 100 to 350 kg / hour. Bdodpfx Asymzz Isl Isb Overall dimensions - 2600mm long x 960mm wide x 1400mm high. Weight - 540 kg. Electrical requirements - 380 V / 50 hz / 3 phase. Supplied with 2 x pallets of trays and fitted with a brand new belt.

Year of construction: 2010, condition: excellent (used), Technogel 4000E Rotary filling machine Serial: RA1091/01E Bedpfxonxlvhs Al Iedb 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph

Condition: as good as new (ex-display), Rotary vane vacuum pump Manufacturer: Busch Type: R5 RD0360A Status: unused as new Warranty: 12 months Bdedpfx Alehmbkze Ijb

Year of construction: 2016, condition: as good as new (ex-display), Rotary vane vacuum pump Bdsdpfxec Sy Tts Al Ieb Oil lubricated Manufacturer: Busch Type: RA 0063F Included: Oil filling Status: Pilot device Warranty: 12 months Delivery time: ex stock

Condition: excellent (used), Rotary vane vacuum pump Manufacturer: Edwards Bdedpfx Alohmkcne Ieb Type: E1M275 Included: Oil filling Status: very good (The pump is tested, cleaned and receives a new service before delivery) Warranty: 3 months

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, volume flow: 12.6 m³/h, overall weight: 200 kg, total length: 1,250 mm, total width: 415 mm, total height: 450 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 25 rpm, rotational speed (min.): 20 rpm, torque: 390 Nm, 2 units unused rotary valve dosing feeders. Both feeder valves have been completely overhauled. New bearings and seals have been installed. ! Price per unit ! Manufacturer: Kreisel Industries GmbH Model: ZS315-1 Inlet / Outlet size: 300 x 300 mm Housing material: Cast iron / Rotor: welded steel sheet Installation height: 450 mm Number of pockets: 7 Bearings can be lubricated from both sides externally. Pocket dimensions: Length 300 mm / Width 100 mm / Height 40 mm Weight: 200 kg per unit Gear motors are also unused stock items. Manufacturer: Thurm DDR Year of manufacture: 1990 Functionality has been tested! Feeder valve 1 Drive power: 0.75 kW Speed: 20 rpm Theoretical throughput: 10 m³/hour Bjdpfx Aex N A N Tol Ijdb Feeder valve 2 Drive power: 1.1 kW Speed: 25 rpm Theoretical throughput: 12.6 m³/hour

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank Bdsdpfxsnvdmwe Al Ijb

Year of construction: 2026, condition: new, Stainless Steel Rotary Table – For Food Packaging Lines Manufacturer: In-house production Machine type: Rotary table / accumulation table Application: Food packaging and processing lines Description This stainless steel rotary table is designed for product accumulation and handling at the end or beginning of food packaging lines. The table allows operators to easily collect, sort, or feed products during the packaging process. The rotary table is built with hygienic stainless steel construction and is suitable for use in food production environments. It can be used as a collection table after packaging machines or as a feeding table before labeling, weighing, or packing systems. Our rotary tables are manufactured in-house and can be supplied in different diameters depending on customer requirements. Technical Specifications - Machine type: Rotary accumulation table - Construction: Stainless steel (food grade) - Drive: Electric motor with gearbox - Speed: One rotation speed - Power supply: 230 / 400 V – 50 Hz (depending on configuration) - Design: Hygienic construction suitable for food environments Key Features - Heavy-duty stainless steel construction - Smooth product accumulation and handling - Suitable for food production and packaging lines Applications - Food packaging lines - Tray sealing lines - Checkweigher and labeling lines Bdedpfxsyt Hdzj Al Iob - Product collection after packaging machines Condition New – manufactured in-house.

Year of construction: 2020, condition: new, Hydraulically height-adjustable tilt and turn table Bodpfx Alod H Hzbj Iedb Maximum load: 2.500kg faceplate diameter: 1.200 mm Stroke:1,050 mm

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Bodpfx Aot Hfrcjl Iodb Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 20,000 kg, total length: 4,750 mm, total width: 2,600 mm, type of input current: three-phase, rotary table diameter: 2,500 mm, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable turn/tilt table Maximum load: 20,000kg (permitted center of gravity 700mm) Torque: 30.000Nm Face plate diameter: 2,500 mm Height of faceplate: 1,326mm-2,641 hydraulic Height of 90° tilted face plate: 1,045mm-2,360mm Tilting range: 135° hydraulic Bdodet Hgmuepfx Al Ijb Faceplate speed: 0.1-2 rpm electromotive Operation: manual remote control

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Bdedpowdfyqefx Al Ieb Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Condition: ready for operation (used), Year of construction: 2015, Two similar CNC rotary transfer machines Winema are available. 1) Winema RV20 Evolution Flexmaster, year of manufacture: 2016, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC. Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. 2) Winema RV20 Evolution Flexmaster, year of manufacture: 2015, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC (Sinumerik). Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. Both machines are specifically designed for the production of rotationally symmetrical components. Documentation available. An on-site inspection is possible. Individual sale possible. Bdjdpfx Ajyyplvol Ieb

Year of construction: 1989, condition: excellent (used), functionality: fully functional, machine/vehicle number: 297838, ❇️ Schüco Pneumatic Rotary Table Press 297 838 incl. approx. 20 tools ⸻ ❇️ Description For sale is a Schüco pneumatic rotary table press, including an extensive tool package comprising around 20 additional Schüco tools and inserts. The machine comes from the current inventory of a professional window and metal construction company and is in very good, fully functional, and well-maintained condition. This offer is particularly attractive due to the numerous original Schüco tools included, making the package ideal for buyers involved in aluminum window construction, façade construction, or metalworking. ⸻ ❇️ Technical Data • Manufacturer: Schüco International • Machine: Pneumatic Rotary Table Press • Model / Article No.: 297 838 • Year of manufacture: 1989 • Max. operating pressure: 8 bar • Max. weight: 150 kg ⸻ ❇️ Scope of Delivery / Tool Package The delivery includes approx. 20 tools / processing units / inserts in addition. The following Schüco part numbers can be seen on several of the tools: • 293 900 • 296 160 • 296 161 • 296 162 • 296 489 • 290 265 • 290 266 • 290 434 • 290 541 • 290 556 • 299 259 Some with designations or system references such as: • Locking bar • Locking bar guide groove notch • Handle cut-out • Drainage opening • Schüco Matic • Schüco Window System Royal This makes the offer especially attractive for companies already operating with older Schüco systems or specifically searching for matching tools. ⸻ ❇️ Condition • Machine is fully functional • Well-maintained overall condition • Tools appear to originate directly from the press environment Bdodpfx Aoyzctcjl Ijb • Preferably sold as a complete package ⸻ ❇️ External Dimensions I can provide the exact external dimensions of the press upon request. ⸻ ❇️ Price €1,490 net plus VAT ⸻ ❇️ Sale & Handling • Sale is on behalf of a client • Invoice with VAT can be issued • Delivery possible at buyer’s expense • Location: 72229 Rohrdorf • Loading by overhead crane available on-site • Inspection available by appointment ⸻ ❇️ Note All machines are in very good, fully operational, and well-maintained condition.