Used Saw Milling for sale (14,277)

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min Nsdevu E R Sspfx Aacoku feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW Nksdpjxb Edzjfx Aacsu weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min Njdpfx Aaewdta Ejcoku dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° round: 400 mm square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts • Automatic bow lifting height adjustment according to material diameter Nkodpfx Ajynaz Njacsu • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1997, condition: used, functionality: unexamined, Emmegi Classic Single TU/4 double head saw with infeed and outfeed roller conveyors, s/n 242937 (1997) This lot is located in Farnworth, Bolton. Collection must be made on Tuesday 3rd March 2026. Nkedpfx Aajyg Rfvscou

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) This lot is located in Farnworth, Bolton. Nsdpfx Aoyg Rfceacsku Collection must be made on Tuesday 3rd March 2026.

Condition: used, Year of construction: 2003, functionality: unexamined, Pertici Univer 500D2K double head saw with infeed and outfeed roller conveyors, s/n 03D131 (2003) This lot is located in Farnworth, Bolton. Nkedpfx Aasyg Rd Secju Collection must be made on Tuesday 3rd March 2026.

Condition: used, Year of construction: 2001, Lot consists of: (1) CNC Lathe Technical Details: X/Z 210/610 mm, 12-position tool turret / all positions driven (4,000 rpm), tailstock, C-axes, spindle speed 3,600 rpm, spindle bore 65 mm, coolant unit with KNOLL chip conveyor, and two drawer cabinets with accessories (no warranty of completeness) The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage. Nksdpsym Rlvjfx Aacou

Condition: used, Year of construction: 2006, Lot consists of: (1) CNC Lathe Technical Details: Nkjdpfx Aasym Rlcecju Lot includes 1 x Spinner CNC lathe, an assortment of tools, and 1 x tool cabinet with contents (contents may vary). Tech. specs of the lathe: Max. turning diameter: 430 mm; distance between centers: 730 mm; Turret capacity: up to 12 driven tools; Control type: Fauc 21 i. The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 3,500 mm, ZAYER bed type milling machine in good working condition. Specifications: X-axis travel: 3200mm Y-axis travel: 1200mm Nkodpfx Asw Uha Hoacju Z-axis travel: 1000mm milling head taper: ISO 50 control: Heidenhain TNC410 table size: 3500x1000mm year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 566-06124, functionality: fully functional, Doall automatic bandsaw in good working condition. Cutting capacity round: 335 mm Year of manufacture: 2006 Njdpfox A S Agox Aacjku

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Nodpeyi Unaofx Aaceku Saw band dimensions: 5090 x 34 x 1.1 mm

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Nsdpsb A Igpofx Aacoku -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Y axis (+/-105mm), C axis 0.001 degrees, Nodpfow Nwfbjx Aacsku B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104 Nkjdeymx S Dopfx Aacou

Condition: used, Year of construction: 2004, x-travel 510 mm y-travel 355 mm z-travel 405 mm table surface area 786 x 355 mm control Kitamura spindle turning speed range 150 - 15.000 U/min spindle taper SK 30 Nksdpfx Asym D Aujacju table load 240 kg rapid traverse X/Y/Z axis 50/50/36 m/min ATC 20 Pos workpiece diameter at full load 70 mm tool diameter if 2 vacant positions 100 mm tool length - max. 200 mm weight of tools max. 2 kg total power requirement 15 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,4 x 2,1x 2,63 m

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, Nkedpfx Aajyffz Njceu 12 station turret, 15kW spindle motor, FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3615 102 087, saw blade diameter: 350 mm, New Price KASTO radial U10 good as new A lot of new saw blade, (see pictures) Nkedpfxjvwm Ece Aacju

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter - mm turning length - mm control M 730 BM Additional information CNC control: M 730 BM Center distance: 500 mm Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Power: 11/7.5 kW (25% duty cycle / constant) Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter Nodpfx Aaoyml Dmeceku High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil mist separator Hinged belt chip conveyor Renishaw workpiece measuring system with optical signal transmission, counter spindle Cooling of the ball screw in the X-axis

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min Nkodpsymlp Ajfx Aaceu weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details Nedjymln Sjpfx Aacjku x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm Nkodpfx Aaoymlmnscju z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Nedexpm Evopfx Aacoku Holz Her Power Feeder, type 1112 – 4 rollers Location: Ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Bandsaw HOLZKRAFT Techno Max S45 N - used - tiltable table, upper blade guide, lower blade guide, cutting height adjustment via handwheel, operating pressure indicator ----- Technical Data ----- Wheel diameter: 450 mm, Max. cutting height: 305 mm, Max. cutting width: 435 mm, Nedpfxjym Umqj Aacsku Table size: 600x520 mm, Blade length: 3,724 mm, Motor: 2.2 kW, Extraction port: 120 mm, Weight: 165 kg, Dimensions: 1,850x800x830 mm Quality Information: - Blade run / imbalance checked - Band tires checked - Guides checked - Fully cleaned - Electrical system checked - Immediately ready for operation

Condition: used, functionality: fully functional, DUFOUR 624D MILLING MACHINE Table surface: 1,600 x 345 mm 5 T-slots of 18 mm Spindle taper: 5 A 40 Longitudinal travel: 1,100 mm Cross travel: 400 mm Vertical travel: 546 mm Maximum clearance between horizontal spindle axis and table: 552 mm Clearance between head spindle axis and frame: 410 mm Clear height under heads: 530 mm 16 spindle speeds: from 24 to 1,180 rpm Longitudinal and cross feeds: 10 to 825 mm/min Rapid traverse: 2.8 mm/min Spindle motor: 7.4 kW Feed motor: 2 kW Coolant by electric pump: 0.16 HP Overall dimensions (L x W x H): 2,120 x 2,105 x 2,050 mm Nsdpoynhh Djfx Aacjku Approximate weight: 3,750 kg