Used Saw Sharpening Machine for sale (66,946)

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Fodoxua N Sjpfx Aggsgg Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: used, APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: - Workpiece length: 55–170 mm - Workpiece height: max. 27.5 mm - Workpiece width: max. 28 mm - Milling units: 2 Fgodpfx Aeztvzhjggsg - Cross-cut saw: 1

Condition: good (used), Year of construction: 1988, machine/vehicle number: 109884, Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 400 V / 1.2 / 1.8 kW - Feed rate of the saw blade, hydraulically continuously adjustable - Vertical material clamping - Coolant system Fodpfezibmbsx Aggegg - Space requirement: approx. W 800 x H 1850 x D 1100 mm - Weight: approx. 850 kg - Infeed – roller conveyor with storage area: 4000 mm - Outfeed – roller conveyor with measuring stop: 4000 mm

Condition: new, Year of construction: 2026, Width of the band swa blades 50-200 mm Sharpening pitch 60 mm Weight 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p.m. - Grinding wheel motor power 1,10kW - Coolant type Water emulsion(bakalite wheel) / Oil (CBN wheel) - Coolant motor capacity 70 lt/min. Coolant pressure 10 bars. - Coolant container capacity 80lt. Motor quantity 6 - Connected load 3,6kW - Voltage 400V, 3Ph, 50-60Hz - Dimensions 1550*2000*1550mm (saw blade unmounted) - Net/gross weight 750/800kg PNK-CNC at a glance: - 2 axes Servo motor controlled. - Operating screen in any language. (please state the required language in order) - Downloading a program through internet if demanded. - LCD screen control panel. - Language selection on the control panel. - Tooth form selection from the control panel. - Grinding all common tooth types. - Possibility of saving grinding programs of the blades ground. - Following the hook angle from the control panel. - Indexing by servo motor. - Absolute tooth pitch accuracy. - Variable grinding speed. - Variable grinding wheel rotation speed. - Grinding head riding on linear rails. - Optionally wet or dry grinding. - Grinding by CBN wheel or DIA wheel. - Water emulsion/oil coolant [for CBN grinding]. - Central lubrication. - Integrated light unit. - Separation of electronic and grinding areas. - Included band saw carrier legs. - Motor controlled band saw vertical movement. - Steady mechanic blade clamp. - Enclosed cabin for operator safety. - Ergonomic machine construction for ease of loading and unloading. - Simple controls for ease of use. - Rigid machine construction. - Production conformed with CE standards. OPTION: - full cover EUR 2.500,- Fgedpfx Ageyk Icajgeg

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, JWV service is proud to present the new Carif 260 Auto. This fully automatic and compact bandsaw machine is manufactured in Italy using European components. Fgedpfjzlf Dcjx Aggsg As the importer, we can arrange a demonstration of the machine at your location.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Technical data: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - Maximum vise opening width: 145 mm - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm Fedpjy R Ablefx Aggsgg - At 45°: round 95 mm flat 95 x 85 mm - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg

Condition: used, WIDMA UWS 650 tool sharpening machine for grinding and sharpening tools or for machining complex geometric shapes. Fgsdpfx Aszrx Hkeggjg Technical data: - Length: 1,000 mm - Width: 600 mm - Height: 1,400 mm - Mounting mandrel Ø: 30 mm - Mounting mandrel length: 135 mm

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Fgodpfx Ajwp Ipxsggeg

Condition: excellent (used), Frietsch SAWMILL MACHINERY Buying and selling KASTO sawing machines Dear Sir or Madam, We buy, sell, overhaul, repair, and repaint KASTO sawing machines. We have over 40 years of experience with KASTO sawing machines and have specialized in overhauling these machines. We can also handle KASTO control systems! The machines are overhauled by trained personnel according to KASTO factory standards. We also source KASTO sawing machines according to your specifications for machine overhauls. Excellent price-performance ratio thanks to professional machine overhauls. Fedpfx Agsfh Huksgsgg

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - Fgsdpou R Sy Njfx Aggeg pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6023, Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx.: - at 90° circular 140 mm - or rectangular 170 x 140 mm - Miter adjustable to the left and right 45 - 90 - 30° - Pneumatic saw blade feed - Pneumatic quick-release clamp - Pneumatic connection - Original machine base - Infeed roller conveyor 3000 mm Fodpfszrvfwsx Aggegg - Outfeed roller conveyor with measuring stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Machine weight approx. 150 kg

Condition: excellent (used), overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, CANA E blade sharpening machine Fgodpfxozqtzyo Aggjg in very good working condition with centering cone // grinding wheels transport and delivery possible

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T211178, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, cutting length (max.): 3,200 mm, main saw diameter: 315 mm, Equipment: scorer, F25 Basic equipment - Manual height and tilt adjustment of saw blade 0 – 46°, with digital display - Drive power 4 kW (5.5 HP), single speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Mitre fence, cross cuts up to 3,450 mm - Max. saw blade diameter 315 mm, max. saw blade projection 104 mm Fsdpfx Aewwt Aysggegg - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package type 2 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,410 mm - Large extraction hood (PSV) - Basic scorer with LED lighting

Condition: good (used), Iseli SBW Sharpening Machine Fgedjzhi Ttspfx Aggeg

Year of construction: 1978, condition: used, machine/vehicle number: 1078136, Behringer full automatic sawing machine in a good working condition. Fjdpfxsbta Dmo Aggegg Capacity round 320mm

Condition: excellent (used), new engine, finish diameters 40-140 Fjdoq R Sutjpfx Aggjgg

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. Fgsdox S U I Hepfx Aggjg This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg Fjdpfx Agsudi Unogjgg

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Fjdpfsi D D A Sjx Aggegg Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Fsdpfx Agsw T S Sqjgogg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm Fjdpsy H Dmhofx Aggogg - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. Fgodpfxsuiy Hrj Aggsg The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Fgjdpfx Asudi Uzjggsg Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence Fjdpoyyzqdefx Aggegg ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm Fodpfx Aoxta N Ajggjgg