Used Sawmill for sale (775)

Condition: good (used), Year of construction: 1985, functionality: fully functional, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3 mm, Equipment: cabin, crane, For sale is a Wolf-Wagen, formerly used by a school. It has few operating hours and is in very good condition! Sold on behalf of a customer! - Miter saw - Measuring device Gsdpfx Ajzau Smskhjkd - Cut-to-length system - Gripper

Condition: ready for operation (used), The conveyor is 13 meter in length with built in screen for sawdust separation. Width 600 mm. Gkedpfx Akjzb U Hyohjd Metal detector included with electrical control cabinet.

Year of construction: 2025, condition: new, functionality: fully functional, - 340 mm Cutting height - 70-250 mm max. cutting width - 500 mm passage width Gkodpfehkh N Tox Akhod - 6000 mm step length - 3-20 m/min feed speed - 2 x 30 KW saw motors - 1,1 KW feed motor - 0,25 KW width adjustment motor - 1300 Kg weight

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight Gkedpfsfvbphex Akhod

Year of construction: 2003, condition: used, Paul AB 920 Infeed Table Godpfx Akeiauhzshekd

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW Gksdsr Ak Rgepfx Akhod feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 4,410 h, load capacity: 4,000 kg, lifting height: 6,540 mm, free lift: 2,020 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,850 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,500 mm, fork length: 1,200 mm, fork width: 1,520 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 21 X 9 - 15, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 12,850 kg, empty load weight: 8,850 kg, total height: 2,350 mm, total length: 1,850 mm, total width: 1,650 mm, color: green, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB4000 | LPG | TRIPLEX 6540 MM | FORK POSITIONER | FULLY HEATED CAB | READY TO WORK ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY Are you looking for a reliable forklift that delivers value from day one without unexpected maintenance costs? We offer a fully inspected, serviced, and tested COMBILIFT CB4000, ready for immediate operation in warehouses, manufacturing plants, and logistics centers. ⭐ KEY ADVANTAGES ✔ Full technical service and operational testing ✔ Start-up warranty ✔ Brand new Super Elastic tires ✔ Excellent technical and cosmetic condition ✔ TRIPLEX mast with free lift ✔ Hydraulic fork positioner and sideshift ✔ Ready to work without additional investment ✔ Live online demonstration available ⚙️ TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: CB4000 Year: 2014 Capacity: 4000 kg Engine: LPG Operating hours: 4410 h Mast: TRIPLEX Lift height: 6540 mm Free lift: YES Fork positioner: 1500 mm Fork length: 1200 mm Cab: Fully heated cab Service weight: 7200 kg 📏 DIMENSIONS Overall height: 2350 mm Collapsed mast height: 2850 mm Overall length: 1850 mm Overall width: 1650 mm 🛞 TIRES – 100% BRAND NEW Front: 21 x 9 x 15 Super Elastic Rear: 28 x 12.5 x 15 Super Elastic 🔧 EQUIPMENT ✔ Hydraulic fork positioner ✔ Hydraulic fork sideshift ✔ TRIPLEX mast with free lift ✔ Fully heated operator cab ✔ Working lights ✔ Warning beacon ✔ Adjustable operator seat ✔ Windscreen wipers Gkjdj Aduh Eopfx Akhsd ✔ Opening windows ✔ Third and fourth hydraulic valves ✔ CE certification ✔ Operator's manual 🏭 IDEAL FOR Timber and wood processing, sawmills, steel mills, steel service centers, structural steel manufacturing, handling pipes, profiles, and long materials, warehouses, logistics centers, and indoor or outdoor industrial operations. 🏆 WHY CHOOSE FT LOGISTICS? We specialize in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes comprehensive technical inspection, servicing, and operational testing before delivery. 🚜 OVER 200 MACHINES AVAILABLE FROM STOCK! 🌍 We supply equipment throughout Europe and worldwide. 🤝 WE PROVIDE ✅ Full pre-delivery service ✅ Warranty and technical support ✅ Professional technical advice ✅ Leasing and financing solutions ✅ European and worldwide transport ✅ Export assistance and customs documentation ✅ Comprehensive after-sales support Hundreds of European customers trust our machines and return for further purchases. 📸 Live online demonstrations, additional photographs, and videos available on request. 🚛 We arrange direct delivery to your facility and provide individual transport quotations. FT LOGISTICS – WE DELIVER MACHINES THAT ARE READY TO WORK!

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total width: 4,600 mm, total height: 2,500 mm, spindle motor power: 10,000 W, product length (max.): 13,500 mm, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included • Additional services available upon request: • Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Gkjdpfszug D Aox Akhed Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm)

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, overall weight: 11,500 kg, transport length: 11,800 mm, input voltage: 380 V, transport height: 2,200 mm, transport width: 2,400 mm, Equipment: documentation/manual, PRIMULTINI SE-CEA-IEA 1100 RIGHT-HAND LOG SAWMILL with loader and unloader 1) SE 1100 COLUMN 1100×120 mm flywheels for 130×7500 mm blades electric blade tensioner and blade guide 60 hp engine with automatic starter 2) CEA-IEA CARRIAGE 4 vices with electric clamping and release vice opening 900 mm 3 hydraulic log turners electric spacers with two speeds hydraulic feed with cable rail length 16.5 m control panel 3) COMPLETE AUTOMATION INCLUDING: - 5000 mm 3-way log loader with 4 loading arms Gkodpfsz Rvdpox Akhod - unloading system with 6500 mm motorized conveyor with helical rollers (for side or longitudinal unloading) with 2 pneumatic log handling arms 4) FOUNDATION DRAWING AND OPERATION AND MAINTENANCE MANUAL - disassembled by specialized technicians, ready for loading - transport dimensions: open-top semi-trailer or 40″ open-top container - weight 11,500 kg

Condition: good (used), functionality: fully functional, B&Z sorting and cut-to-length trailer. Track gauge 1.90 m. Equipped with a Stihl HF 121 saw. Surveying system. Alpha cut-to-length system. Gksdpfx Akozumx Hehsd Jonsereds crane. Hultins grapple. From a small business, manufactured in 1986 / overhauled in 1998. 25,000 operating hours. Also interesting for firewood producers.

Condition: good (used), functionality: fully functional, Sturdy, mobile roundwood and timber cross conveyor. Gedpfx Akjzum Uuehekd Equipped with 5 chain strands. Electric drive for mobility. Track width 1.60 m.

Year of construction: 2011, condition: excellent (used), machine/vehicle number: 5150-4011-0031, Maximum working width : 660 mm Maximum block hight : 180 mm Minimum lamel thikness : 1,3 mm Gkodpezz Ibvsfx Akhsd Engine size : 35,2 Kw Amp : 66,4 Infeed speed : 1 - 18 mtr/min ( Automatic speed adaption after width/material/hardness ) Infeed hight : 1300 mm Machine dimensions : L 3200 x W 1400 x H 2000 mm Machine weight : 3300 Kg Machine is still connected to power, and can be examined in working condition( Location : Denmark )

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range Gkjdpezz Sugofx Akhod • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. Gjdovuhumjpfx Akhjkd The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Year of construction: 2024, condition: new, max. cutting height – ø 340 mm min./max. cutting width 80 – 250 mm min./max. side fence 18 – 80 mm max. cutting length 6,000 mm Feed rate 5 – 30 m/min Saw motors 2 x 55 kW Feed motor 4.0 kW Width adjustment motor 0.55 kW Infeed roller motor 0.75 kW Weight 8,000 Gkedou Izkepfx Akhod Optional equipment Self-adjusting laser Infeed table extension up to 8,000 mm Automatic width adjustment with 6 fixed dimensions Equipped with 1,000-mm-ø blades Motorized log rotating device Electronic braking system

Year of construction: 2024, condition: new, - 10000 mm standard length - 800 mm standard rooler width - 2,2 KW gearbox roller conveyor Gkjdpjbrq R Djfx Akhjd - 0,75 KW gearbox infeed roller

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter Gkjdpfx Aegp Su Eekhed - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Condition: like new (used), Used belt conveyor in good condition Gkedpfx Aofh Inwekhsd

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. Gksdpfx Ast Irffekhjd • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Gsdoy Sf Ukopfx Akhekd Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete wood debarking line for pallet production, including a stacking machine, crosscut saw, chipper, edger, and dust extraction system. Year of manufacture: 2021 Technical data: - Max wood diameter: 480 mm - Minimum wood diameter: 120 mm - Minimum wood length: 1500 mm - Max log length: 3000 mm CAPACITY: UP TO 200 m3 PER SHIFT THE DEBARKING LINE CONSISTS OF THE FOLLOWING MACHINES: 1. BRODPOL DEBARKING LINE, which includes: - Log infeed conveyor - Longitudinal conveyor for the saw - Circular saw – 110 and 90 kW motors - Receiving roller table with a mechanism for removing edgings and side boards - Powered roller table - Base table SB 4000 - Multi-blade two-shaft saw WP 210 – 110 and 75 kW motors - Receiving table with board discharge and conveyor to the stacking machine - Lower return conveyor for edgings, side conveyor to the edger, and conveyor belt to the chipper - Sawdust screen 2. LIGNUMA OFZ 300 EDGER AND TRIMMER Year of manufacture: 2023 The machine consists of the following components: - Centering table Gksdpfsv Dm T Tsx Akhed - Trimmer MN 315 - Separating table SC-2 - Edger OFD 500/K 3. TEKNAMOTOR SKORPION 650 EB/2 CHIPPER with infeed and discharge systems. 4. COMPLETE DUST EXTRACTION SYSTEM FOR ALL MACHINES.

Condition: good (used), length 5 meter. working diameters 220 mm - 600 mm Godpjv Scfzsfx Akhekd

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: Gedpfxexa Etto Akhekd 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, MAKOR ACR 2 Automatic Trolley Destacker – Fully Restored We offer a fully restored MAKOR ACR 2 automatic trolley destacker, made in Italy. It unloads profiles, mouldings and other long wooden parts from transport and drying trolleys. The parts move one by one onto a roller conveyor and on to a coating, drying or finishing line. The machine has been fully restored and tested, and it is ready for immediate production use. Technical specifications: Manufacturer: MAKOR (Italy) Gksdpe Ad Ii Njfx Akhsd Model: ACR 2 Serial number: 5316 Year of manufacture: 1995 Machine type: automatic trolley destacker Machine length: 3000 mm Distance between lifting arms: 1400 mm Power supply: 400 V, 3-phase Noise level: 75 dB(A) Construction: heavy-duty steel frame Condition: fully restored, in working order Advantages: Trolleys are unloaded automatically, with no manual lifting Suitable for profiles, mouldings and other long wooden parts Ideal for coating, drying and finishing lines Control panel with automatic and manual modes Robust industrial construction that is easy to maintain Restored, tested and ready to work

Condition: used, Kadikis AV Belt Conveyors The conveyors are suitable for material handling, packaging, woodworking and other production lines. Technical specifications: Quantity: 2 pcs Conveyor length: 2000 mm Belt width: 150 mm Drive motor power: 0.75 kW Frequency inverter: Yaskawa V1000 Power supply: 230 V, single-phase Protection: C10 circuit breaker Controls: on/off switch, emergency stop button, speed adjustment with a potentiometer Construction: heavy-duty steel frame with adjustable feet Condition: lightly used, in working order Advantages: Gjdpfj Ad Ir Dex Akhjkd Adjustable belt speed Runs on a standard 230 V supply Compact, with a small footprint Robust and reliable construction