Used Scanner for sale (363)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Gbedpfx Aj Aiu Tyjansw Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, shelf height: 7,200 mm, load capacity per storage section: 2,000 kg, TECHNICAL DETAILS General Information Manufacturer: BÖCKELT Model: TOWER Year of Construction: 2017 Racking System Number of Racking Bays: 41 Racking Height: 7.20 m Maximum Bay Load: 38 t Maximum Load per Level: 2,000 kg Shelves and Storage Dimensions Shelf External Dimensions: 3,340 × 1,600 × 90 mm Additional Loading Height: 60 mm or 160 mm Drawer Internal Dimensions: for panel format 3,000 × 1,500 mm Maximum Weight of Loaded Shelf: 2,300 kg Automated Narrow Aisle Trucks Number: 2 Manufacturer/Model: MLR Mayesto 2.3 Design: Automated narrow aisle trucks with reinforced lifting mast Load Capacity per Vehicle: 2,300 kg up to 4,500 mm lifting height Residual Load Capacity per Vehicle: 2,000 kg up to 7,500 mm lifting height Truck Load Capacity: 2,000 kg at 7,500 mm lifting height per vehicle Travel Speeds Forward/Reverse Travel: max. 1.6 m/s Curve Travel: 0.3 m/s Positioning Travel: 0.1 m/s Battery and Charging Technology Battery Voltage: 80 V Battery Capacity: 930 Ah Charger: on-board Automatic Recharge: via sliding conductors in 3 horizontal aisles Safety and Detection Technology Laser Scanner: SICK, front and rear Software and Control System Control System: MLR LogOS-FTS Operation: fully automatic Visualization: graphic and tabular EQUIPMENT Complete software for fully automatic system operation 41 racking bays 2 automated MLR Mayesto 2.3 narrow aisle trucks Reinforced lifting masts Telescopic forks that can extend on both sides Multi-level telescopic table SICK laser scanners, front and rear On-board charger Automatic recharge via sliding conductors Shelves with aluminum panels Transport order management Vehicle dispatch Gedpfxj Aay Dwe Aanjbw Storage location management User management Error and signal management Statistics Energy monitoring

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 200 mm, total height: 850 mm, type of input current: AC, total width: 720 mm, total length: 950 mm, overall weight: 54 kg, input voltage: 230 V, table width: 500 mm, table length: 500 mm, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, KEYENCE VL-570 Optical 3D Coordinate Measuring Machine The VL-570, from Keyence’s VL-500 series, is a 3D measuring machine that measures various shapes from the stripe projection image of the object, which is captured with a black-and-white CMOS camera. The linear light from the light source (stripe projection light) is projected onto the object at an angle using the projection lens. Measurement types that can be performed with the VL-570: 3D measurement, plane measurement, profile measurement, 3D comparison measurement, profile comparison measurement. The basic unit consists of: - VL-500 control unit - VL-550 500mm base - VL-570 measuring head - VL-H2P comparison measurement module - VL-C2 cover - OP-88145 calibration plate Technical data: Repeatability: 2µm Measuring accuracy: 10µm Standard measuring mode (4M mode): 4 million measuring points Fine measuring mode (16M mode): 16 million measuring points Rotation mechanism: 360° Tilt mechanism: 45° Measuring range: Ø500mm x H 200mm Gbodpoz Ihkbefx Aanew User manual and quick start guides are included. New price: €52,350 (net) Upon request, the 3D coordinate measuring machine can be delivered within a 200 km radius of our company headquarters. Delivery costs will be agreed upon separately.

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Gbodpfx Aoytrdtsansw Capacity to 50.000 bph. YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 3D scanner, the “Shining 3D Scanner & EX Pro(H)” Item for sale: 1 x Shining 3D Scanner & EX Pro(H) We are happy to configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Gjdpozxxubefx Aanobw For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 661351, measuring range X-axis: 275 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 300 mm, total height: 294 mm, type of input current: AC, total width: 77 mm, overall weight: 1 kg, input voltage: 230 V, table length: 122 mm, repeat accuracy: 0.02 mm, year of last overhaul: 2026, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, 1 Careful owner, approx 500 hours of usage. Current Calibration certificate dated Nov 2026. Comes with the following: HP ZBook 15 G3 Workstation Laptop - High specification laptop PC for use with Creaform Scanners. Windows 7 Pro 64bit 15" Display UHD Screen Intel i7-6700HQ 64GB DDR4 RAM NVIDIA Graphics Quadro M2000M 4GB 256GB SSD M.2 NVMe (approx. 600hrs powered) 500GB HDD (approx. 600hrs powered) VX Elements software installed. VX Remote 10 Inch Tablet 3D Scanner External Battery Bank- 72wh Handyscan 3D Scanning Turntable with bag Gbjdj Ahy Huopfx Aanow Positioning Targets - Magnetic - Pack of 750 in metal tin Positioning Targets - Adhesive - Pack of 500 - box of 34 units (17000!) Scraper for targets - 1 unit Extra Spare USB 3.0 Cable for HandySCAN700 - 4 meters AESUB blue scanning Spray - 1 can Rugged Custom built freight case for Scanner box (18mm structural Plywood)

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand large-format scanner, the “Contex HD Ultra RB67G” Gbede Akdazepfx Aanew Item for sale: 1x Contex HD Ultra RB67G Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2023, operating hours: 2,470 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1257.01, Wood scanner Luxscan EasyScan Smart NEW OptiCore AI Software Laser cameras 4 Colour cameras 4 3D & scatter lasers 4 Dot lasers (softwood) 4 Automatic camera positioning fix widths LED lighting devices 4 Ingoing lengths min./max. 1800 - 6000 mm Ingoing widths min./max. 40 - 155 mm Ingoing thicknesses min./max. 15 - 60 mm Ingoing widths min./max. (W210) 35 - 210 mm Width tolerance (per board – per bundle) +/- 3 mm Thickness tolerance +/- 3 mm Max horizontal field of view for top/bottom cameras -10 / +40 mm Max vertical field of view for left/right cameras -5 / +15 mm Maximum productivity: 30 boards of 2000 mm per minute 17 boards of 3600 mm per minute Gedpfeyrpaijx Aanobw 10 boards of 6000 mm per minute Max real speed 180 m/min. 3rd generation of the high-speed optimizing cross-cut saw OptiCut 450 Quantum Operating device OptiCom Pro 15.6" Sawblade diameter 400 mm TCT-sawblade Sawblade bore 30 mm Ingoing lengths min./max. 1800 - 6300 mm Ingoing widths min./max. 40 - 200 mm Ingoing thicknesses min./max. 18 - 60 mm Cross sections generally rectangular Nominal cross sections (without board bend) min. 40 x 18 mm max. 200 x 50 mm max. 190 x 60 mm Feed speed infinitely variable max. 450 m/min. Acceleration max. 50 m/s² Motor power saw 7.5 kW (10 HP) Motor power feed system 15.0 kW (20 HP) Outfeed conveyor with 7 quick ejectors,

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Gsdezl Uzwepfx Aansbw Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2016, operating hours: 2,400 h, functionality: fully functional, • Product type: Long-range/high-resolution fixed laser scanner. Gjdpfe Agcw Nsx Aanjbw • Manufacturer part number: 932500002. • Version/Model: Focus 2 (High Resolution, dual-laser version).

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: type plate available, Nikon MCAx30+ 7-Axis Measuring Arm with H120 Laser Scanner – Complete System Nikon Metrology MCAx30+ | 7-Axis | 3.0 m | H120 Scanner | Year of Manufacture 2017 Godpozxz Ikofx Aansbw For sale is a Nikon MCAx30+ 7-axis measuring arm with an H120 laser scanner, manufactured in 2017. The system is in very good technical and optical condition and has been regularly maintained. The laser scanner has a current calibration. Ideally suited for 3D measurement technology, quality control, reverse engineering, component measurement, CAD comparison, prototyping, and mobile 3D data acquisition. Equipment Nikon MCAx30+ 7-axis measuring arm Measuring range approx. 3.0 m Nikon H120 laser scanner FOCUS software Current calibration of the H120 scanner Transport case for the measuring arm Separate transport case for the scanner Probe 3 mm Probe 6 mm Reference probe Calibration sphere Calibration rod Calibration plate for the laser scanner Complete, immediately ready-to-use system Condition The measuring arm and the H120 scanner are in very good condition. The system has been carefully handled and, due to the current calibrations, can be used directly for professional measurement tasks. The MCAx30+ offers high flexibility in mobile 3D measurement technology due to its 7-axis kinematics and 3-meter measuring range. In combination with the H120 laser scanner, the system is suitable for both classical tactile measurement and the rapid, non-contact acquisition of larger components. Thanks to the extensive accessories and the two transport cases, the system is offered as a complete measurement package. Inspection and functional testing are possible after prior arrangement. The sale is preferably as a complete system. If you have any questions about the equipment, software or technical condition, please do not hesitate to contact me.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Intraoral scanner Cara Medit i700w, manufactured in 2022, with a high-end desktop PC. The scanner comes with 3 batteries and a charger, as well as a calibration device. The PC features an Intel i9 11900KF processor, 64 GB of RAM, a 12 GB graphics card, a 1000 GB SSD hard drive, Windows 11, a medical-grade mouse and keyboard, and a 24-inch Viewsonic touch monitor. Everything is ready for immediate use. Gbjdpfx As Ah Dzzoanjw

Condition: used, Industrial X-ray scanner for automated quality control and foreign object detection in packaged food products. Manufacturer: OCS Type: SC-3000-C Machine type: X-ray inspection system / X-ray scanner Year of manufacture: 2010 Voltage supply: 230 V AC Frequency: 50 Hz X-ray tube: MXR-160HP/20 X-ray tube housing: MOR-160 Application: Inspection of packaged food Inspection functions: Foreign object detection and shape defect control Operation: Integrated touchscreen control panel Display: Graphical representation of inspection results and reject image history Gbedpfo Akd Etox Aanow Operating mode: Automatic operation Product rejection: Separate rejection system for foreign objects and shape defects Housing: Stainless steel Conveyor system: Integrated conveyor belt Integration: Integration into automated packaging and production lines

Condition: used, Year of construction: 2015, Forel High Speed Hot -Melt IGU Line, comprising: Forel VW 2000 6 brush glass washer. Serial no: P15080 (2015) 2000 x 3500 (max) Forel / Soft Solution scanner. Serial no: LSC20150291 (from cabinet) Forel SQD 202. Serial no: P15081 (2015) 2 - Forel TSS 20D automatic spacer applicators. Serial no: P15082 (2015) Serial no: P15083 (2015) with guarding Forel Georgian assembly rack with Sick guard 2 - Forel CT 2000 corner tape applicators. Serial no: P15084 (2015). Serial no: P15085 (2015) Forel AFG 20D gas press / coupling press. Serial no: P15086 (2015) Forel SAHM 20D automatic heat sealing hot melt robot. Serial no: P15087 (2015) Gbsdpfx Aao Afwtgenew Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: like new (used), functionality: fully functional, machine/vehicle number: BC120058, Year of construction: 2022, operating hours: 260 h, repeat accuracy: 0.01 mm, As-new 3D scanner, model VL500 from Keyence, available at a competitive price. The device is in perfect working condition and will be offered for sale at the end of March 2026. The ideal cost-effective solution for surface scanning of technical components. Resolution: 0.001 mm; repeatability: 0.002 mm; measurement accuracy: ±0.01 mm. Original purchase price was over €80,000. Gedpfxex Dy Iaj Aansbw

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, Gbsdszmh Awopfx Aanew - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Year of construction: 2024, condition: used, CoolTemper PowerJet TCF-GTH-96.144-PJ4 Convection Flat Glass Tempering Furnace Serial no: H358 (2024) Maximum temperature: 750 degree / Operating temperature 700 degree, Min Glass Size 120 x 320mm, Max Glass Size (4-5mm) 1650 x 2400mm, (6mm) 2150 x 3650mm, (8-19mm) 2440 x 3650mm with Roller Loading/Unloading Tables, Cooltemper GlassScan heat map scanner, Overhead Platform/Fan Room, Cooltemper SMART IMMI Control Godpfx Ae Afwrbsanjbw Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Weight: 4,400 kg Voltage: 230/400 V Frequency: 50 Hz Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. Godpfxs Ahiuae Aansbw The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) • Original acceptance test report • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Gbedszpwg Rjpfx Aanjw Please feel free to contact us if you have any questions!

Condition: good (used), Year of construction: 2022, functionality: fully functional, 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measuring range: Up to approx. 120 mm Volume capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High resolution, no additional color cameras required Interface: USB 3.0 Type B Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision mechanics, reverse engineering, cultural assets, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: Up to 400 kg Max. table size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: Via vertical clamp or quick-release clamp Mobility: 4 swivel castors with total lock Installation aid: Roller strip for sliding the plate into the control cabinet Godpfxexvyius Aanebw Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: used, Year of construction: 2019, Vitronic Barcode Scanner RA1941 Gjdek Abl Eopfx Aanjbw Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imageFORMULA DR-G2140” document scanner Item for sale: 1x Canon imageFORMULA DR-G2140 with the following features: Includes duplex scanner Meter readings: Total: approx. 43.200 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Gbodpfjz Az Sbex Aansw For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 Gjdpfx Aas Ab Uzaenobw • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 1 months, positioning accuracy: 5 mm, Equipment: documentation/manual, The official FARO distributor is selling a demo unit – the FARO Orbis Premium mobile scanner. The package includes: - FARO Orbis Premium mobile 3D laser scanner - Datalogger portable control unit - 2 batteries - Battery charging station - Connection cable - Monopod tripod - Phone mount - FARO calibration certificate - Durable original case The unit is from 2025, comes with a calibration certificate, and has a valid warranty. It has been lightly used – for customer demonstrations and at trade shows. Gbsdpfxozzdpvo Aansw The mobile scanner is in excellent condition. It provides 3D laser scanning with 5mm accuracy, allowing for very fast scanning of large areas, buildings, and rooms. The stationary Flash mode allows scanning with 2mm accuracy. Technical specifications: - Accuracy: 5mm (2mm in Flash mode) - Scanning distance: 120m - LIDAR channels: 32 - Camera: 72MP - Operating time with 1 battery: 3-4 hours The unit is located in Riga, Latvia, and can be viewed in person or remotely.

Year of construction: 2015, condition: used, DATALOGIC POS system Magellan 9800i with Bizerba scale CS 300 MA 9803, scanner cash register Manufacturer: MAGELLAN Model: various Year of manufacture: from 2015 Designation: POS system Weight: approx. 8 kg (with power cable) Connection by qualified technician Price for collection from warehouse 47441 Moers Packaging and shipping costs net €29 Currently 10 units in stock. Further questions welcome by phone or on site. All offers from warehouse 47441 Moers. All dimensions are approximate (photos similar/for reference) Gbedpoy I T Dljfx Aanow