Used Schaublin 120 Vm for sale (53)

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Bjdpfxsyxgyhe Amisdc Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.

Condition: good (used), Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm Bdedpfxeyizh Te Amiec -Weight: 5.3 kg

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm Bdjdpfsy Hnucex Amiec - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube - Machine mounts - Complete documentation including original brochure

Condition: excellent (used), Very good condition Bdjdoy Al Uxspfx Amiec Digital, Multifix, collets W32

Condition: excellent (used), Center height 125 mm Distance between centers 500mm Spindle speeds 40-3000 rpm Several accessories MARCELS MASCHINEN CH Bdjdpfolyrcijx Amiec

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Bedpfx Amew Iq Umjijdc Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: used, machine/vehicle number: 1023, Manufacturing origin Swiss Voltage 380/50/3 Netweight 740 kg Dimensions 155x110x160 cm Total power 2,1 kW Customs position 8459.6930 spindle ISO 30, with digital read-out Sony LM31 - 3 axes TECHNICAL DATA Geometrical characteristics VERTICAL RECTANGULAR TABLE - working surface 740x200 mm - number of T-slots 2 - width of T-slots 12-H7 mm - distance between slots 120 mm FIXED ANGULAR TABLE (accessory 13-5.421) - working surface 700x250 mm - number of T-slots 5 - width of T-slots 12-H7 mm - distance between slots 40 mm - provision for lateral traverse 250 mm in all INCLINABLE UNIVERSAL TABLE (accessory 13-5.300) - working surface 600x210 mm - number of T-slots 4 - width of T-slots 12-H7 mm - distance between slots 40 mm - provision for lateral traverse 350 mm in all Angular setting in all 3 planes, in either direction (horizontal-lateral-transverse) 30°-45°-30° SPINDLE INTERNAL TAPER - horizontal spindle head Iso 30 (40) - vertical spindle head Iso 30 (40) - universal high-speed head Schaublin E20 + ES 20 SWIVEL IN VERTICAL PLANE - vertical spindle head 360 ° Strokes and traverses  LONGITUDINAL STROKE : HANDWHEEL-OPERATED/AUTO. - table 320x300 mm - 1 turn of the wheel equals a long. traverse of 5 mm VERTICAL STROKE : HANDWHEEL-OPERATED/AUTOMATIC - knee 375/355 mm Bdsdpfsfnrxwex Amioc - 1 turn of the wheel equals a vert. traverse of 2 mm TRANSVERSE STROKE : ADJUSTING HANDLE - horizontal spindle head 150 mm - 1 turn of the wheel equals a cross traverse of 5 mm QUILL STROKE - vertical spindle head 60 mm ACCURACY ON READING ON MICROMETER VERNIERS - in all 3 traverses 0,02 mm Drive, motors, power feeds Main motor 1,5 kW 1500 rpm Approach-feed motor (rapid feeds) 0,45 kW 3000 rpm Coolant-system motor 0,15 kW 3000 rpm Spindle speeds (stepless) - 1st range 58-375 rpm - 2nd range 330-2000 rpm Working feeds - longitudinal or vertical 12-400 mm/min - 10 feeds, values in mm/min 12-18-26-38-57 85-125-185-270 400 Approach feed (rapid feed) - longitudinal or vertical 1200 mm/min errors and omissions, excepted data given without obligation Inventory Nr. 2180233 machine equipped with : 1 fix table with 4 T-slots 1 digital read-out Sony LM 31 - 3 axes 1 cooling device 1 lighting 1 chips vat 1 Rest 1 Mill fitter long long ISO 30 Ø 13x97 mm avec pivot 1 do Ø 16x97 mm 1 do Ø 22x137 mm 1 do Ø 27x156 mm 1 Mill fitter short ISO 30 Ø 16x29 1 do Ø 22x14 1 do Ø 22x37 1 do Ø 27x60 1 Mill fitter short ISO 30 for plates 1 Mill fitter cylindrical ISO 30 Ø 20 mm 1 do Ø 12 mm 1 do Ø 6 mm 1 Collet fitter ES-32 ISO 30 1 Set of 29 collets ES-32 various 1 Reduction sleeve Alesa ISO 30 / MT3

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm Bjdsdr R Tcspfx Amisdc - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Bdedpfey Avyxox Amijc Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: good (used), Tailstock for lathe, counter bearing for dividing head, dividing head Bedpfx Amod Riw Heiedc -from: Schaublin 102 -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm Bdodpfx Amewbi Hpsijc spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: good (used), Swing over bed 270 mm Center Height 125 mm Distance between centers 600 mm Spindle speeds 30-5000 rpm Control: FANUC 18i Manual Guide Misc. accessories MARCELS MASCHINEN CH Bodpfx Ajtwpyasmisdc

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Bjdotzxh Topfx Amijdc Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: refurbished (used), For sale is a Swiss Schaublin 13 precision milling machine in fully refurbished condition—better than new. The machine has been completely overhauled in Switzerland. Its geometry has been reworked and the electrical system brought up to the latest standard. Bjdpfx Amjyw A Hzoiodc All guideways are finely scraped and in perfect condition. All wear parts and spindles have been replaced. Belts are renewed, etc. The machine has not been used since the overhaul. In this condition, it is an absolute rarity and already considered an investment piece. Ideal for high-precision applications or collectors who appreciate a perfect machine tool.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Bdedpsx H Szyjfx Amiec Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Year of construction: 1987, condition: used, Schaublin 102N lathe with various tools Bdsdpjyhyt Asfx Amisc

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: Bdedpfxjw Uc Nps Amioc - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Bodpfecpznhox Amiodc Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder Bedsd Htvdopfx Amisdc 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Bdjdped Dgdyofx Amijc Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Bdsdpfx Aecuhvuomijc Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH Bedpfeu Eqixsx Amisdc

Condition: good (used), Digital read-out With milling and drilling head Working travels 330 x 400 x 475mm Bdsdpjw Nnutofx Amisc Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Bdedpjxtnn Tjfx Amijc Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Condition: used, TECHNICAL DETAILS - max. diameter over bed : 270 [mm] - max diameter over slide : 130 [mm] - distance between centers : 440 [mm] - spindle nose : CAMLOCK D1-3' - max bar diameter : 28 [mm] - power : 7.5 [kW] Bdsdpfeuhcarjx Amisc - spindle speed : 0-5000 [rpm] with variator - strokes X x Z : 180 x 400 [mm] - work feeds : 0-5000 [mm/min] with variator - quick feeds : 7500 [mm/min] - supply : tri 380V 50Hz 14kW - size : 1700 x 1226 x 1660 [mm] - weight : 1415 [kg] EQUIPMENT - numerical control FANUC 20-T - quick change turret Multifix 'A' - collets chuck SCHAUBLIN B32 - tail stock with capstan - coolant tank with pump