Used Schaublin 150 for sale (54)

Condition: good (used), functionality: unexamined, machine/vehicle number: 160378, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 375 mm, center height: 160 mm, turning length: 750 mm, total length: 2,500 mm, total width: 1,000 mm, total height: 1,500 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 38 rpm, overall weight: 2,500 kg, - Operating voltage: 380 V - Largest workpiece diameter over cheek: 375 mm - Largest workpiece diameter over cross support: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine feeds longitudinal and transverse: 0.015 to 0.21 mm/rev - Longitudinal and transverse feeds: 0.025 to 0.35 mm/rev - Cross support path on the cheek: 750 mm - Tool slide path: 120 mm Ndjdpjv Irh Djfx Ah Usf - Cross slide path: 215 mm - Center height above tool slide: 32 mm - Steel cross section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill path: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Incl. documentation - Matching workshop cabinet including accessories

Condition: excellent (used), Center height 125 mm Distance between centers 500mm Spindle speeds 40-3000 rpm Ndsdpolyrcijfx Ah Uef Several accessories MARCELS MASCHINEN CH

Condition: used, manufacture Schaublin In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Nsdpfx Ahjw A Ap Tj Uedf subject to prior sale!

Condition: ready for operation (used), Table clamping area: 1100 x 255 mm Ndsdjv Dh Irepfx Ah Uef Table movement x: 700 mm Table movement y: 250 mm Table movement z: 430 mm Spindle speeds: 38 - 1500 rpm Feeds longitudinal and transverse: 12 - 1000 mm/min Feeds vertical: 1.75 m/min Electrical connection: 380 V, approx. 4 kW kW Space required: 1700 x 1600 x 1650 mm Weight: 1650 kg

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Nodetzxh Tspfx Ah Usdf Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: used, Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet holder: type W25 -Drawing: with the photos -Dimensions: 450/360/H170 mm -Weight: 11kg Nedpfxsd Riw Hs Ah Uodf

Condition: excellent (used), functionality: fully functional, Any accessories can be discussed on site Ndedpfx Ajv Natwoh Uof

Condition: good (used), Digital read-out With milling and drilling head Nedpfxew Nnuto Ah Uedf Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: used, turning diameter over bed 310 mm turning dia. over slide 160 mm control BOSCH CNC ALPHA 2 centre distance 340 mm centre height 148 mm spindle tunring speed 3.000 U/min x-axis 220 mm z-axis 400 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Nedpfxjw Sx Uco Ah Uedf Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, centre height 102 mm centre distance 450 mm Ndedowbi Hpepfx Ah Ujf spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Nedpow Iq Umefx Ah Uedf Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: good (used), Year of construction: 1997, turning diameter over cross slide: 60 mm, spindle bore: 24 mm, spindle motor power: 7,500 W, rotational speed (min.): 30 rpm, rotational speed (max.): 5,000 rpm, total height: 1,660 mm, total length: 1,700 mm, total width: 1,240 mm, overall weight: 1,420 kg, Turning capacity Ø 200 mm, travel X/Z 180/400 mm, tools turret 8 places VDI 20 (16x16 mm), spindle 7,5 KW, 30 – 5000 rpm, spindle nose A2-4, chuck collet F38, bore Ø 32 mm, control FANUC Series T-20, manuals Njdpjvu Tvpjfx Ah Uedf

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system Ndjdpfx Ajwvq Tmeh Usf >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: excellent (used), Sub-spindle, C-axis FANUC 18i-TB control Turning diameter max 300mm Turning length -366mm Spindle speeds main spindle 30-5000 rpm Spindle speeds sub spindle 30-6000 Nsdpowufdqefx Ah Uodf Turret head: 12 driven positions C-axis Dividing 0.001 degrees Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive Ndsdpfxecug H So Ah Usf L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Thread cutting Largest pitch with standard change gear set 4 mm Machine plate for 20 metric pitches 0.25 - 4 mm Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Ndsdpfx Asbxkl Toh Usf Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Lathe on box base, approx. 550 kg

Year of construction: 1998, condition: ready for operation (used), Connected load: 24kW. Nodpfx Aong E Tyeh Usdf

Condition: used, TECHNICAL DETAILS - max. diameter over bed : 270 [mm] - max diameter over slide : 130 [mm] - distance between centers : 440 [mm] - spindle nose : CAMLOCK D1-3' - max bar diameter : 28 [mm] - power : 7.5 [kW] - spindle speed : 0-5000 [rpm] with variator - strokes X x Z : 180 x 400 [mm] - work feeds : 0-5000 [mm/min] with variator - quick feeds : 7500 [mm/min] - supply : tri 380V 50Hz 14kW - size : 1700 x 1226 x 1660 [mm] - weight : 1415 [kg] EQUIPMENT - numerical control FANUC 20-T Nsdpfxjuhcare Ah Usdf - quick change turret Multifix 'A' - collets chuck SCHAUBLIN B32 - tail stock with capstan - coolant tank with pump

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm Njdpfx Ascpznhoh Ujdf reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: used, Tip height 125 mm Tip width 500 mm speed 45 - 3000 rpm feed rate 4 - 260 mm/min spindle nose Camlock D1-3" Tailstock cone MK 2 Nedpfxjbzlgls Ah Ujdf Turning diameter over bed 250 mm Turning diameter over cross slide 120 mm top slide travel 100 mm cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] Njdpfx Ahouhbw Ns Uedf - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Ndodpjd Htvdsfx Ah Ujf Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: used, TECHNICAL DETAILS - see photos Nsdpfx Aow Ihtysh Uodf

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Ndsdpfed Dgdysx Ah Uof Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Ndodpfscuhvusx Ah Uef Different "Schaublin 102" models in stock!