Used Scm Record 220 for sale (639)

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Tedozmfg Tepfx Al Aoc Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Tjdpozxzgmsfx Al Aoc Machine is still in operation and in very good condition available at location

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015406, functionality: fully functional, operating hours: 14,808 h, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 200 mm, working length: 3,110 mm, No minimum price – guaranteed sale to the highest bidder! The machine is still in operation and can be inspected while powered on. TECHNICAL DETAILS Working area X-axis: 3,110 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Maximum travel X-axis: 3,500 mm Maximum travel Y-axis: 1,815 mm Maximum travel Z-axis: 440 mm Table length: 3,050 mm Table width: 13 mm Number of milling spindles: 1 Spindle speed: 600 - 24,000 rpm Number of controlled axes: 5 Horizontal drilling spindles: 6 Vertical drilling spindles: 12 Tool changer positions: 16 Tedpjzdy E Ssfx Al Ajc MACHINE DETAILS Main motor power: 11 kW Main motor power of the vacuum pump: 5.5 kW Capacity of the vacuum pump: 250 m³/h Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,450 x 2,850 mm Installed dimensions (L x W x H): 4,600 x 6,500 x 3,400 mm Shipping dimensions: 9,000 x 2,450 x 2,850 mm Empty weight: 4,000 kg Shipping packages: 1 unit Operating hours: 14,808 h EQUIPMENT Milling table: Beam table Tool clamping system: HSK-F63 Material clamping system: Pneumatic Drilling tool Saw unit System/Software: Xilog plus Safety feature: Safety mat Vacuum pump: Becker CNC options: Chip conveyor, Hand control CNC documentation: User key/licenses

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 19,857 h, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Z-axis travel: 180 mm Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots Tsdpfxox Sri Ie Al Ajc EQUIPMENT Worktable with traverse Auxiliary unit for heavy parts Pneumatic clamps for door and window production Vacuum pump 250 m3/h Automatic lubrication Waste conveyor

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system Tedpfx Asz D R S Tel Aec CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L 14 - Transverse conveyor at the outfeed SCM

Condition: excellent (used), Catalog number: 7878 TECHNICAL DATA - track width: 220mm - shaft width: 200mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with clearance: 1100mm - table length: 1640mm - from above: - row of pawls/ejectors - 1 metal feed roller - pawls - metal feed roller - shaft with blades - 2 metal feed rollers - from below: - guide rail - pawls/ejectors - track - stepless feed speed adjustment via a frequency inverter Todpfx Aljztadas Aec - feed motor: 1.1kW - main motor: 29kW - central track lubrication - dust extraction nozzle diameter: 180mm - overall dimensions (L/W/H): 2000x1600x1500mm - weight: 1480kg ADVANTAGES - Made in Italy - Multi-blade saw, used - Very good condition Net price: 27,900 PLN Net price: 6,488 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations.)

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Tsdpfxjz E Sgus Al Asc Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Mortiser: Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Tsdpewhi Sljfx Al Aec Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: used, Year of construction: 2015, machine/vehicle number: AE/034366, functionality: fully functional, power: 6.6 kW (8.97 HP), input voltage: 380 V, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, saw blade diameter: 380 mm, total length: 3,800 mm, total width: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used SCM SIGMA IMPACT 90 panel saw, year of construction 2015. Best Price: SCM SIGMA IMPACT 90 – CNC Panel Saw / Beam Saw Year of manufacture: 2015 Tedpfx Alsz Dw Uns Asc Serial number: AE/034366 Condition: Used Technical specifications Cutting dimensions: 3, 800 × 3, 200 mm Main saw motor: 9 HP / approx. 6.6 kW Scoring saw motor: 2.5 kW Main saw blade diameter: 380 mm 3 front air-cushion tables 17" touchscreen Control software: SCM WinCut 12 Cutting optimization software: Ottimo Cut Top+ / Easy Cut CE compliant Professional CNC-controlled horizontal panel saw suitable for cutting chipboard, MDF, plywood and other panel materials. Machine is still functional and available for inspection in Latvia.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AB / 162765, overall weight: 1,410 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, We offer this used SCM COMPACT XL 4-side planer, year of construction 2004. Serial number: AB/162765 Year of manufacture: 2004 year Weight: 1.410 kg Nominal voltage: 400 V Phases: 3 Current: 33 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or need more information, feel free to send us a message or give us a call. Tedpfez Hacyjx Al Asc

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16 Tjdpfx Aozvwnbjl Aoc

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Tedpoz Aquhjfx Al Asc Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Tjdpexg El Ajfx Al Ajc Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: AB00019454, functionality: fully functional, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, For sale, a fully functional CNC drilling machine, model SCM Morbidelli CX210, with high axis travel speeds, a very large drilling head, and a drilling head for Blum fitting spacing, as well as a saw for creating grooves. Very fast drilling, without an electro-spindle. Specifications: Min./Max. element length mm 200/3,050 Min./Max. element width mm 50/1,300 Min./Max. element thickness mm 8/95 Max. element weight kg 70 Max. feed rate in X-Y-Z axes m/min 70-40-30 DRILLING HEAD F31LTC Vertical spindles pcs. 21 Horizontal spindles in X axis pcs. 6 Horizontal spindles in X axis pcs. 4 Spindle speed rpm 4,500 Fixed saw in X axis, diameter mm, rpm 125 5500 Max. saw thickness mm 6 Motor power kW 2.2 ADDITIONAL OPTIONS Inverter for the drilling head to adjust the drilling head speed in the range of 3000-8000 rpm Drilling head for fittings with 45/9.5 spacing "eye-M PRO" console integrated with PC Device allowing CNC operation via provided programs. Supplied with: - system for monitoring machine status via an LED light bar - industrial PC: Fanless design, IP 53 protection - Intel I7 processor – 2.80/3.80 GHz - 8 GB RAM – DDR4 - 256 GB SSD hard drive - Windows 10 IOT – 64 bit program - QWERTY keyboard, English version Todpfxjzz Syvj Al Ajc - 3-function wired mouse - Ethernet RJ45 port - USB port: 1 available - nominal operating temperature +5°C / +35°C - color LCD monitor, 21 inches, full HD, 16/9 format, LED backlight, multi-touch system, 10-point Remote control Additional USB hardware key for the Maestro CNC program.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel Todpfx Aozuzfhsl Aoc - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Todpfx Alsz Hb Nbs Ajc

Condition: used, Year of construction: 2016, We are offering this used SCM STARTECH CN drilling machine, manufactured in 2016. Year of manufacture: 2016 Serial number: AB/226922 Type: F004 Model: STARTECH CN The advertised price is €14,500 net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us. Tjdpfx Aoz Afdkel Asc

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 Tsdpfx Alezzb I No Aec - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008659, X axis working area: 3000 mm Y axis working area: 900 mm Main Electrospindle power: 5.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Tsdpszvwnhofx Al Ajc

Condition: used, machine/vehicle number: 008657, Max. panel width: 3200 mm Max. panel length: 3200 mm Todpfezvwnnsx Al Asc Main saw blade projection: 115 mm No of Grippers: 8

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height Todpfxszydafj Al Aoc - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers Todpfx Ajzcmcvel Ajc 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Tjdpfx Asz Ebzhol Aoc Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 300 mm, type of input current: three-phase, workpiece width (max.): 220 mm, This machine is in very good condition, was not used as much as anticipated. Tsdpfezifmlsx Al Aoc

Condition: used, Year of construction: 2022, Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Technical data Position 1 RC 250-2620 working unit for rollers with a diameter of 250 mm - RA-250 steel grooved roller - Time-controlled oscillating blower for cleaning the sanding belt - Motor with 22 kW - PR-E pressure unit with 2 rubber-coated rollers at the inlet of the unit Position 2 TIE-5000 working unit for internal, adjustable cross sliding shoe Todpfjz E Uxtox Al Aoc - PE 32T PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Motorized rotary blower - Inverter-controlled motor, power up to 15 kW Position 3 SC-2620 working unit for superfinish sliding shoe - PE 32/C PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Time-controlled oscillating blower for cleaning the sanding belt - Inverter-controlled motor, power up to 15 kW Position 4 BSH 250 working unit for textured roller with a diameter of 250 mm - STY 250 brush roller with a diameter of 250 mm with Tynex bristles with a diameter of 1.27 mm - Pneumatic on/off switching of the brush roller - Inverter-controlled motor with 11 kW At the outlet SP/U 200 working unit at the outlet for cleaning rollers, diameter 250 mm - SPC 200 brush roller with a diameter of 200 mm - Motor with 1.1 kW - Time-controlled rotary blower for workpiece cleaning at the outlet of the brush unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.