Used Scrapers for sale (636)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System Ljdozqr Skspfx Afwsaf • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Lodpfezavyfsx Afwjaf

Condition: ready for operation (used), Year of construction: 2011, Offered is a vertical three-axis machining center. Travels X/Y/Z: 1524mm/660mm/610mm, table: 1675mm x 660mm, spindle speed: 12000rpm, tool holder: SK40, tool changer: 24 positions, spindle hours: 1937h (spindle replaced 10/2019), chip disposal: scraper conveyor, control system: WinMax. Equipped with 3D probe Renishaw, scraper chip conveyor, coolant system, spindle cooler, coolant spray gun, chip splash protection enclosure, flushing system for chip removal, electronic handwheel, rigid tapping, DXF software, cooling air through spindle switchable. Weight: approx. 8400kg, overall dimensions X/Y/Z: approx. 4650mm/3470mm/3030mm. Inspection possible by arrangement. Lodey Ulmlspfx Afwoaf

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Ledozf Nbxepfx Afweaf

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Ledst Iw Ryepfx Afwoaf

Year of construction: 2022, condition: ready for operation (used), A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible. Lajdpfx Afsudm Dtjwof

Condition: ready for operation (used), Year of construction: 2008, Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement. Laedpfx Afey T N H Howof

Year of construction: 1994, condition: ready for operation (used), A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible. Lasdpfx Afowv Umqswjf

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Ljdpfew R Uziox Afwsaf

Condition: ready for operation (used), Year of construction: 2007, A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible. Ledpfeyn Nz Esx Afwoaf

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,802 h, spindle speed (max.): 10,000 rpm, total height: 4,500 mm, total width: 10,500 mm, overall weight: 41,500 kg, table width: 1,000 mm, table length: 1,250 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, product length (max.): 10,500 mm, table load: 3,000 kg, number of axes: 5, This 5-axis DECKEL MAHO DMC 160 U Hi-Dyn was manufactured in 2002. It features an impressive X-axis travel of 1600 mm, Y-axis travel of 1250 mm, and Z-axis travel of 1000 mm. The machine includes a tool changer capacity of 60 slots and a maximum load of 3000 kg on the pallet table. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 160 U Hi-Dyn universal machining centre we have for sale. Contact us for further details. Laodjzqcz Nspfx Afwjf - Tool Changer Capacity: 60 slots in rack magazine- Gripper Type: Double gripper- Operating Hours: 78,814 hours (as of 11/2024)- Program Run Hours: 20,802 hours (as of 11/2024)- Spindle Hours: 21,295 hours- Enclosure: Full protection cabin- Internal Coolant Supply (IKZ): 40 bar through spindle center (theoretical pump capacity)- Air Blast: Through spindle center, retrofitted (Original DMG)- Chip Conveyor: Scraper belt conveyor- Coolant Tank Capacity: 900 liters- Pallet Changer: Duo-Block pallet changer with 2 pallets- Pallet Table Surface: 1250 x 1000 mm- Clamping Grid: 100 x 100 mm, M20 thread- Milling Head: Universal milling head with controlled B-axis for 5-axis positioning and simultaneous machining- Universal Touch Probe: Heidenhain TS642- Calibration Kit: 3D Quick-Set in case- Operating Mode: Mode 4 capable- Cleaning Equipment: Wash-down gun with pump Technical Specification Taper Size SK 50 Through-spindle Coolant Yes

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Laedpfx Ajzpzy Uofwjf Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication Lodpozpzy Isfx Afwsaf - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. Laedpfx Afey Urtfowsf The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), functionality: fully functional, tank capacity: 73 l, usable tank capacity: 50 l, total length: 1,200 mm, total width: 1,500 mm, total height: 2,000 mm, Process system for the production of creams, ointments, and suppository masses Design for foaming products The heated container is vacuum-resistant up to -1 bar and pressure-resistant up to 2.4 bar. TECHNICAL DETAILS Temperature range, container interior, max.: 95°C Jacket temperature, max.: 140°C Usable volume: 50 L Total volume: 73 L Minimum filling volume: 10 L Homogenizer Model: Brienz RF 112 M-2 Power: 4 kW Speed: max. 2,850 rpm Mixer/Scraper Lasdpfezrfbbex Afwef Gearbox: SEW FAF 37 Speed: max. 28 rpm MACHINE DETAILS Space requirement: 1,200 × 1,500 × 2,000 mm

Condition: used, Suitable for steam heating capacity 1.600L. all stainless steel double jacket tiltable drum Laodpfozi Dfaex Afwef stirring system with spring-mounted scrapers high pressure steam (max. 10 bar) dimensions (l x w x h): ± 4.000 x 2.000 x 2.300 mm + "Berief" Loader for 200L eurobins, Type L25

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Lsdpfxjzqz Hwo Afwjaf Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm Lasdpst Ac Efjfx Afwef A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: excellent (used), Year of construction: 2001, x-travel 2200 mm y-travel 3200 mm z-travel 1250 mm Control FIDIA C20 c-axis +/- 200 ° milling-head swivable +/- +90 ° milling-head swivable +/- -100 ° feeds X-axis 50 m/min feeds Y-axis 50 m/min feeds Z-axis 50 m/min tool taper HSK A63 tool change unit 16 Pos. spindle turning speed range 18000 U/min distance between columns 4060 mm dist. milling spindle - table surface 1796 mm connected load 238 kVA weight of the machine ca. 45 t dimensions of the machine ca. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be viewed under power by arrangement with the seller. Description: Jobs LinX6 Type: 5-axis milling machine with movable gantry and fixed table Ledpfoxa Hl Rjx Afwjaf Control: FIDIA C20 Year of manufacture: 2001 Travel X: 2200 mm Y travel: 3200 mm Z travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height between table and portal: 1807 mm Clearance height between table and spindle nose: 1796 mm Milling head: T2K D.01.06 Tool holder: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40KW Spindle speed: 250 - 18000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors in all axes - JIMS / preparation for semi-automatic motor spindle change - Replacement spindle as spare part - External coolant supply / 1000L tank - Minimum quantity coolant dosing - Scraper conveyor - Renishaw TS27 tool measuring system - Ethernet connection - Manual control module Other: Complete documentation available Machine weight: approx. 45 tonnes Space requirements: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm Ledpexa Hl Dofx Afwoaf table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Travel distance X: 2500 mm Travel distance Y: 800 mm Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21071601, input voltage: 380 V, power: 6.05 kW (8.23 HP), Sinmag mixer, entirely made of stainless steel, with a 100L capacity. Lajdpfx Afezpfnpowof Equipped with a bowl, a whisk, a spiral beater, a paddle, and 1 scraper.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 2,700 mm, total width: 1,950 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25,000 W, product length (max.): 3,308 mm, number of axes: 3, This 3-axis DECKEL MAHO DMP 60V was manufactured in 2003. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 425 mm. The machine is equipped with a spindle speed range of 20 to 18,000 rpm and a tool changer with 25 magazine positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMP 60V vertical machining centre we have for sale. Contact us for further details. Laedpfjznc T Hex Afwof - Control Unit: Siemens 840D / SINUMERIK 840D powerline- Spindle Speed Range: 20 to 18,000 rpm- AC Main Drive Power: 35/25 kW (40/100% ED)- Tool Changer / Capacity: 25 magazine positions- Tool Holder Taper: HSK-A 63- Worktable Type: Swivel / Pallet Changer- Clamping Surface Area: 2x 660 x 400 mm- Internal Coolant Supply (IKZ): 40 bar / 23 l/min / 600 L tank- Coolant / Filtration System: Interlit Kompakt-Filteranlage (Type: SPB 3/600, Filter surface: 0.7 m², Tank capacity: 600 l, YOM: 2003) with gravity paper belt filter unit- Coolant / Chip Management: Scraper belt chip conveyor (1000 mm discharge height) with auxiliary 200 L coolant tank- Accessories: Electronic handwheel, integrated blow-off/spray gun attached to front cabinet- Machine Dimensions (Height): 2700 mm (Machine height), 2645 mm (Transport height)- Machine Dimensions (Width): 1950 mm (Without control panel), 2990 mm (With control panel / door open), 1950 mm (Transport width)- Machine Dimensions (Length): 3308 mm (Machine length), 3850 mm (Transport length with swivelled control)- Required Floor Area: 6000 x 4000 mm (Standard), 6000 x 5200 mm (With chip conveyor), 6000 x 5300 mm (With chip conveyor and coolant system)- Transport Dimensions (L x W x H): Approx. 3400 x 2000 x 2700 mm- Documentation Included: Machine Handbook

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 20,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. Lasdpjzdzmwsfx Afwjf - Spindle Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle)- Tool Taper: SK 40 according to DIN 69871 (Optional HSK-A 63 according to DIN 69893)- Tool Magazine: Chain magazine with double gripper, 60 tool pockets (SK40 / HSK-A63)- NC Swivel Rotary Table: Integrated in rigid table, 800 mm x 650 mm- Control System: CELOS with Siemens 840D sl Operate, including 21.5" ERGOline Control with Multi-Touch Screen- Features: MPC (Machine Protection Control), Chip flushing, Integrated coolant tank 500 l- Coolant / Chip Disposal included: * Production Package: Scraper belt chip conveyor with coolant system 600 liters, paper band filter, discharge height 950 mm, width 670 mm * Internal Coolant Supply (IKZ): 40 bar / 20 l/min through spindle center (AD) * External Coolant Supply: 4 bar / 40 l/min * Washdown Pistol with pump (2 bar / 10 l/min) * Oil and Emulsion Mist Extraction System: Mechanical filter, airflow rate 600 m³/h- Measuring / Monitoring: * Infrared Measuring Probe: Heidenhain TS 649 (SK40 / HSK-A63) * 3D quickSET: Tooling check and inspection of kinematic accuracy for 4/5-axis machine configurations Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: 221-0404, Please refer to the images for the description. Manufacturer: JAUDT Dosiertechnik Maschinenfabrik GmbH Lajdpfx Aozhmilofwof Type: 6305 (scraper wheel lock) Year of manufacture: 2021 Order number: 221-0404 Serial number: 0463888 Dimensions: 350 × 350 mm (according to drawing ZSR 350x350/670) Weight: approx. 350 kg Motor: SEW-Eurodrive DRN100L8, 1.1 kW, IE3 Complete documentation in German is available. If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Lajdpfx Afjqqi Dkowof Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty