Used Scrapers for sale (727)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,714 h, This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information. Additional equipment • Jointing cutter • Radiant heater • EVA gluing unit • Roll magazine for edge material • Cutting unit • Flush milling top/bottom Nkjdpfx Afoyaqbwohot • MFA with 2 motors for radius r2, servo-controlled • Profile scraper unit • Surface scraper unit • Buffing unit Machine Benefits Technical Machine Benefits • Feed speed: 20 m/min Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2001, This HOMAG Optimat KL 78/A20/S2/Z was manufactured in 2001. A robust single-sided edge bander, it features a comprehensive setup including joint milling, a glue premelter, pressure zone, snipping, and flush trimming units. It also boasts advanced contour and groove trimming, profile and surface scrapers, and a buffing unit, all controlled by the Homatic NC 21 unit. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Nedpfx Afoyap Tlshekt • Single-sided edge banding machine with workpiece return • Joint milling • Gluing section with glue premelter • Pressure zone • Snipping unit • Flush trimming • Contour trimming unit fk 13 with automatic tool changer 8-fold • Groove trimming unit • Profile scraper // surface scraper • Buffing unit Extra Information Machine still under power

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST Nodsw U U S Njpfx Afhskt throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm feed 5 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm Nkjdpfoulnb Dsx Afhet capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 capacity 30 degrees: flat 170 x 335 15 - 150 m/min workpiece weight max. 250 kg/m kg 3,0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 turning speeds 50 - 12000 U/min Nkedpfx Afsv S Irtehjt no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - IKZ 15 bar - SK40 mounts - Operating instructions The following repairs were carried out in 07/2022: - X-axis guide carriage - Various pneumatic hoses - Safety glass on loading doors - Various push buttons with indicator lights - Door safety switches - X-axis cover (slats) - IKZ filters (4 pieces) - Filter cabinet - Z+Y-axis toothed belts - Door scrapers with dampers - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles for external cooling - 2x falcon bars for the Y-axis - 1x set of door rollers with rail (6 meters) - 1x Klüber grease with cone reamer

Condition: ready for operation (used), Year of construction: 2019, operating hours: 336 h, functionality: fully functional, total length: 4,764 mm, edge thickness (max.): 8 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edgebanding machine with only 336 operating hours & extensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control system: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edgebander configuration: • Flush trimming/scraper units, radii: 1 mm and 2 mm • Spray unit for final edge finishing • Spray unit for delicate edges • Flat scraper "RC-V" • Brushing unit "SP-V" • "SAVENERGY" kit • "EASY SIZE" adjustment unit • Interior lighting for the cabin and edge banding area • Ceramic infrared lamp Nkodpfx Asydc Abjfhst • Electronic positioning of pressure rollers • Spare glue pot "SGP" with NC dosing • Additional glue pot "SGP" with NC dosing • Manual feed • "Nesting" tracing rollers • Diamond tools H=64 for pre-milling unit, 2 teeth • Base frame ADDITIONAL EQUIPMENT • SAC TS110 spindle moulder • Wagner EM40-15 lacquering device (year of manufacture 2018) • SCM FS 7 surface planer/thicknesser (year of manufacture 2022) • Aircraft A-K-MAX 15-10 VS screw compressor (year of manufacture 2022) • Schmalz vacuum lifter • Martin T24 spindle moulder with power feed and Aigner fence (year of manufacture 1977) • Concord AFKH surface planer • Kölle F50 spindle moulder incl. power feed • Kölle KFS 40 panel saw (year of manufacture 1980)

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) Nkjdeyailzjpfx Afhet • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: new, Year of construction: 2025, - FANUC 0i-MF Plus "NEW" - 10.4" LCD color screen - Diagonal, MANUAL GUIDE i Machine Table - Table size: 1,120 x 560 mm - Load capacity: 1,000 kg - T-slot width: 18 mm - Number of T-slots: 5 - T-slot spacing: 100 mm - Table height from floor: 900 mm Travel paths and distances - X / Y / Z travel paths: 1,050 / 560 / 560 mm - Spindle nose to table surface: 150 - 710 mm - Spindle center to column: 600 mm Linear axis guides & speeds - Flat guides in X / Y / Z axes - Rapid traverse X/Y/Z: 36/36/34 m/min - Milling feed: 1 – 10,000 mm/min - Minimum increment: 0.001 mm Tool magazine (CAM type) / tool changer - Tool holder: BBT-50 (optional SK-50) - Number of magazine positions: 24 - System: random - Max. tool diameter: Ø 105 mm - Max. tool diameter with free adjacent positions: Ø200 mm - Max. tool length: 300 mm - Max. tool weight: 15 kg Spindle - Spindle taper: BTT-50 BIG-PLUS® (optional SK-50) - Drive type: 2-stage gearbox - Speed level 1: 80 - 1,500 rpm - Speed level 2: 1,500 - 8,000 rpm - Drive power (30 min/continuous): 11 / 7.5 kW - Torque (30 min/continuous): 236/161 Nm up to 369 rpm - Lubrication: Grease Nedpfxswkf Izj Afhskt - Inner bearing diameter: Ø80 mm - Spindle cooling: Oil Coolant, chip, and compressed air management - Coolant system including 400-liter tank and pumps - External coolant around the spindle - Internal cooling 50 bar - Bed flushing, 0.85 kW / 130 l/min., (optional) - Chip spirals on the right and left side of the machine bed Chips are conveyed to the front of the machine - Chip spiral (optional: belt or scraper belt chip conveyor) Chips are conveyed to the left side of the machine - Compressed air nozzle on the spindle (M32/M33) - Compressed air through the spindle (M38/M39), (Optional) - Compressed air and coolant gun Other Equipment - Pivoting control panel - Electronic handwheel (wired) - Central oil/air lubrication system - Spindle oil cooler - Fully enclosed housing - Work light - Heat exchanger on the control cabinet - Auto-Power OFF function - Hand tool set - Signal light - Transformer 400 VAC, 50 Hz - CE Declaration of Conformity

Condition: used, Year of construction: 1993, 2 pallet changers and 4th axis Year of manufacture: 1993 X-travel: 1,020 mm Y-travel: 560 mm Z-travel: 400 mm Table-to-spindle distance: 550 mm Control: Yasnac M80 Table size: 1,200 x 660 mm 2 pallets: 1 pallet with 2 Chick clamps – 1 pallet with 4th axis Tsudakoma RNCV201 Table load: 600 kg Tool holder: SK 40 Rapid traverse X-Y axes: 25,000 mm/min Rapid traverse Z: 15,000 mm/min Spindle speed: 200–20,000 rpm Motor power: 11/15 kW Tool magazine: 40 Nedpfx Afjwxbg Aehjkt Internal coolant supply: 20 bar Coolant tank Timer Scraper conveyor Renishaw probe Spindle cooler Air cooler Electronic handwheel Machine weight: 9 t Required space: approx. 7 m x 4.5 m x 2.85 m Total power requirement: 40 kVA

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW Nsdpjxaaipofx Afhjkt weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Nodpfxexabrfs Afhjkt Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang Nkjdpfx Afoxfh Tmjhjt HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges -with 2 motors for cleaning from above and below -with oscillation -Swivelable Nkedpfeb Sgzdex Afhot - laterally adjustable -Height: adjustable -Number: 1x aggregate available -Dimensions: 400/370/H470 mm -Weight: 35 kg

Condition: good (used), Year of construction: 1987, Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm Nedpfecitlhsx Afhjkt -A conversion to a three-point attachment for tractors or drive-in pockets for forklifts and wheel loaders is possible for an additional charge -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine Nkodpfx Aogy T I Eefhjt -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable -Height: adjustable -Dimensions: 480/250/H490 mm -Weight: 29 kg

Condition: good (used), Year of construction: 1987, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow Nkedpfx Asdz U Spsfhet -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper blade, condition as shown in photos (one is missing) -Sign height: approx. 1100 mm -Conversion to three-point linkage for tractors or forklift pockets for forklifts and wheel loaders is possible for an additional charge. -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

Condition: good (used), serrated knife, scraper knife, machine knife, knife -Scraper knife: blade insert 6 pieces -Type: 721 B 218 -Hole diameter: Ø 6.5 mm -Number: 6x blades available -Price/Delivery:complete -Dimensions: 345/65/1 mm -Weight: 0.2 kg/piece Nksdpfxov Ahkwe Afhjt

Condition: excellent (used), Year of construction: 2025, Field roller, grassland roller, meadow roller, soil roller, roller -Meadow roller: Diameter: 1200 mm -Wall thickness of the pipe: 18 mm -Equipment: Water fillable, with scraper, warning signs -Total width: 3000 mm -Working width: 2650 mm -Bearings: polyamide bushings -Weight filled: approx. 5,000 kg - Empty weight: 2,200 kg Nodpfotlzdbsx Afhekt

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt rubber, for bucket elevator, rubber conveyor belt, rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat, rubber strip, rubber strip with fabric insert, scraper bar, rubber lip -Conveyor belt: rubber strip with fabric insert -Width: 250 mm -Length: 23.5 m -Thickness: 8 mm -Shipping/Price: complete Nkedoxc Ip Ajpfx Afhot -Transport dimensions: Ø 580 x 250 mm -Weight: 59 kg

Condition: used, Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm Nkjdocwdmgopfx Afhjt -Dimensions: 200/140/H170 mm -Weight: 12 kg

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine Nkedpfx Afscn Ibqehot -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -Motor: 1.1 kW -Speed: 2840 rpm -side: adjustable -height: adjustable -Number: 1x aggregates available -Price: per piece -Dimensions: 350/350/H500 mm -Weight: 32 kg

Condition: used, Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine Nkedpfxegx Am Ij Afhjt -Finishing unit: from BRANDT KM 36 edge banding machine -Motor: 0.18 kW -side: adjustable -Height: adjustable -Number: 2x aggregates available -Speed: 1x 1360 rpm, 1x 1250 rpm -Price per piece -Dimensions: 260/370 / H510 mm / 260/370 / H480 mm -Weight: 22 kg / pc.

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing device for disposal of glue residue on PVC edges Nkedjb Sc Sxopfx Afhst -with oscillation -Swiveling -side: adjustable -height: adjustable -Number: 4x units available -Price: per piece -Dimensions: 580/350/H460 mm -Weight: 28 kg

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine Nsdpjcghhfefx Afhskt -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available -Price: per piece -Dimensions: 400/160/H225 mm -Weight: 5.7 kg

Condition: used, Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine Nsdogy T Nfjpfx Afhekt -Finishing unit: from BRANDT KM 35 edge banding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm -side: adjustable -Height: adjustable -Dimensions: 350/230 / H415 mm -Weight: 20 kg