Used Screw Manufacturing for sale (41,972)

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Chedozxhfiopfx Ab Djb Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2008, operating hours: 22,795 h, machine/vehicle number: 5039, overall weight: 600 kg, power: 18.5 kW (25.15 HP), type of cooling: air, Equipment: documentation/manual, type plate available, Frequency-controlled screw compressor with integrated heat recovery Cjdsw Trghspfx Ab Dshb Manufacturer: Kaeser Type: ASD 32 Delivery rate: 8 bar - 3.2 m³/min Motor power: 18.5 kW Compressed air connection: G 1¼ Max. available thermal output: 16.4 kW Includes complete documentation + CE certificate Next maintenance at 24,360 operating hours Weight: 600 kg Required space: 1350 x 921 x 1505 mm (L x W x H) The machine can be demonstrated on site. All information subject to change. Prior sale reserved.

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Codszlaa Eopfx Ab Dohb Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and Cedpfxjyhcghe Ab Dohb was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Barrel and screws are in a good condition.

Condition: used, functionality: fully functional, Complete screw conveyor made of stainless steel. Diameter: ø200mm Length: 4,800mm Chedpfezp U Acox Ab Dsb Manufacturer: DTS

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Cedpfxsyhcc Ao Ab Dshb Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: ready for operation (used), Year of construction: 2002, functionality: unexamined, Screw compressor, Atlas Copco GA250 250 kW Chedpjzymciofx Ab Deb 7.50 bar 42.32 m3/min Year of manufacture: 2002

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Chsdpfjzl A N Nsx Ab Dob Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 Codpfsztu Dbox Ab Dshb TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 2022, condition: good (used), Manufacturer: Clextral Model: Evolum EV032 M Year: 2022 Condition: Used Serial Number: B145 Stock Number: 3385 Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Compressed air: 6 Bar Steam injection: 2 - 6 Bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 working hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max 10 Bar Reservoir: 7.5 litre Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Clextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max 10 Bar Reservoir: 10 litre Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam kit Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 Bar Maximum pressure:10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Compressed air: 6 - 10 Bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pc. Tooltemp thermoregulator Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group plowshear mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 litres Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip feeding screw Csdszab Stopfx Ab Dehb Type: ELV 70/80-R Hopper: 150 litres Outfeed: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing unit Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling power: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW Chjdpfjzxr Uuox Ab Djb - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Year of construction: 2001, condition: good (used), Brand: Rollepaal B.V. Chedpfx Aezx Da Ajb Deb Type: A-Rex 90-33 Type number: E309.0001 Screw: Single Screw diameter: 90 mm L/D ratio: 33 Serial number: 230/400 Year of manufacture: 2001

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZR90 90 kW 7.50 bar 14 m3/min Year of manufacture: 2012 Chodpfezqvvasx Ab Dob Operating hours: 5735

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring Csdpfx Aezu Aibob Dehb - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage Chjdpfeztx Ansx Ab Djb -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) Cedpeyzh Ulofx Ab Dshb - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm Csdpfxezv Ei He Ab Dehb * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Year of construction: 1993, operating hours: 2,466 h, condition: used, Brand: Leistritz AG Model: Micro 27/40 D Codpfxozu Nk Se Ab Dshb Screw type: Twin screw Year of manufacture: 1993 Screw diameter: 27 mm L/D ratio: 40 Operating hours: 2,466

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is currently in storage at Plastima Used Machinery. The machine was manufactured in 1998. – Brand: Cincinnati – Model: Titan 45R-APC – Year of manufacture: 1998 – Conical twin-screw extruder – Screw diameter: 45 mm – Operating hours: 64,082 Chedjzu Nnqopfx Ab Dsb

Condition: good (used), Year of construction: 1995, Gebr. Kaeser screw compressor SK 19 Chodpfxozrhrve Ab Dob Motor power: 11 kW Year of manufacture: 1995 Permissible operating overpressure: 10 bar Air delivery rate: 1900 liters/min with Kaeser control relay Dimensions approx. L 785 x W 820 x H 1017 mm (dimensions without connections). Weight: 270 kg Location: available from warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications The system is built to handle heavy production environments with the following configurations: Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Chsdpozu Auwsfx Ab Deb Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Weight2,400 kg (5,291 lbs)

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 Chodpozwk Iwsfx Ab Dsb For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Chsdpfx Aoyl S Ebeb Deb

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design Cedpoyfm Spofx Ab Dshb The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Year of construction: 2003, condition: used, machine/vehicle number: 143912, Stainless steel screw conveyor in a plastic housing (made of stainless steel), manufactured by Bruynooghe in 2003. Screw diameter: ø500mm Length: approx. 10,250mm Cjdpozmfpbofx Ab Dohb Suitable for food processing applications.