Used Second Bank for sale (4,860)

Year of construction: 2004, condition: used, 2004 Kuntz 626 Single Bank Spotting Unit With Touchscreen Control Table Dimension 430 x 400mm. With Safety Light Guards, Spare Parts & Manual. (2004). Prjdpfx Aajz E Rwfozsb

Condition: good (used), functionality: fully functional, Steinheil KONTUR 408-2/D Optoelectronic Contour and Shaft Measurement System High-precision Steinheil KONTUR 408-2/D optoelectronic contour and shaft measurement system with high-quality Jenoptik optics The system is designed for non-contact, high-precision, and rapid measurement of rotationally symmetric components (e.g., shafts, camshafts, turned parts) The device scans the measurement object non-contact using the shadow image principle. Rotational measurements are recorded with up to 1,440 measurement points on the circumference per measurement location. Evaluation and quality control are performed directly via integrated SPC (Statistical Process Control) software based on Windows NT, featuring clear tolerance bars and diagrams The system is housed in a closed aluminum profile enclosure with a transparent protective cover and is safeguarded by professional safety light curtains System Overview Operating Principle: It scans workpieces non-contact using the shadow image principle. Main Application: Fast and precise measurement of complete workpiece contours and shafts in industrial settings. The Measuring Unit (KONTUR 408): Vertical measuring setup with integrated IR LED illumination and sensor technology Measuring range: Diameters from 4 to 85 mm, workpiece lengths up to 400 mm Drive & scales: Brushless servo motors and high-precision Heidenhain scales The device is housed in a sturdy aluminum profile frame with transparent protective panels and Sick safety light curtains. The control& IT Infrastructure: A rugged 19-inch control cabinet (Rittal) houses the VME bus process computer. A separate PC workstation controls data analysis and visualization (historically designed for Windows NT). A wide range of standard interfaces on the rear panel (including RJ-45 network, serial COM ports, parallel LPT2 printer port, AUI interfaces, and BNC coaxial connectors) Technical Specifications: Manufacturer: Steinheil Model: KONTUR 408 Diameter measurement range: 4 mm to 85 mm Length measurement range: up to 400 mm Diameter resolution: < 0.5 µm Length resolution: 0.5 µm Prodpfx Aajzz Hwvozsb Rotation resolution: 0.018° Measurement Accuracy (at 20°C): Diameter: ± 2 µm; Length: ± [5 + L [mm] / 100] µm Sampling Rate (Scans): 2,000 per second / 5,000 per mm Measurement Times: 10 to 50 seconds (depending on the number of test features) Measuring Systems / Scales: High-quality Heidenhain scales (length & rotation) Drive System: Brushless DC servo motors (controlled via Elmo NBA 10/200RH amplifiers) Process Computer: VME bus computer in a Rittal cabinet Data Analysis/Visualization: PC workstation (designed for Windows NT) Illumination: IR LED system (service life approx. 50,000 hours) Protection rating: IP 54 Operating temperature: +10 °C to +45 °C Dimensions (W x H x D): approx. 590 x 900 x 380 mm Weight: approx. 100 kg (plus peripherals/cabinet) Installation: Desktop unit / tabletop setup “Everything from a single source: We’d be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Air Purification System The system incinerates gaseous pollutants and odors from production exhaust air in order to release clean air into the environment. Extraction: Process air containing solvents or odors (e.g., from painting facilities, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to extremely high temperatures. Combustion (Oxidation): In the combustion chamber, the natural gas feed (the support burner) ignites the air. At temperatures of up to 850°C, organic pollutants (VOCs) decompose completely into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The cleaned, hot air subsequently flows through a second ceramic bed, releasing its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as very little additional gas firing is required after the start-up phase. Prodpjzrl Ibjfx Aazob System specifications Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Serial number: 15212 Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / Calorific value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Flow pressure: 200 – 1,500 daPa Max. combustion chamber temperature: 850°C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current draw: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Prsdozw Ukcjpfx Aazeb Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 600, number of blades: 20, rotational speed (max.): 1,475 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Prjdpfx Aasz Ebbbszob Main engine power: 22 kW Speed: 1,475 rpm Hydraulic unit power: 3 kW Oil tank capacity: 48 l Number of axles: 1 Opening width: 600 mm Opening length: 250 mm Screen perforation: 15 mm Number of fixed blades: 20+ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,350 x 2,400 mm Number of transport packages: 3 Note: The magnet is not included in the offer.

Condition: good (used), Year of construction: 2000, FANUC LR Mate 200i automation robot + R-J2+ handheld controller The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a variety of manufacturing and system processes. The tabletop design of the LR Mate 200 allows it to be used in a variety of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design encloses all cable routing to prevent snagging, and absolute serial encoders eliminate the need for power-up calibration. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i has a wrist-integrated end effector connector, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an integrated, internally mounted solenoid valve package. In addition, the 200i can achieve axis speeds of up to 480 degrees per second. Areas of application: Assembly, material handling, material removal, parts transfer Robot specifications Axes:6 Payload:3.00 kg H-reach:700.00mm Repeatability:± 0.0400 mm Robot mass:39.00kg Structure:Articulated Year built 2000 Robot movement speed J1180 ° / s (3.14 rad / s) J2180 ° / s (3.14 rad / s) J3225 ° / s (3.93 rad / s) J4400 ° / s (6.98 rad / s) J5330 ° / s (5.76 rad / s) J6480 ° / s (8.38 rad / s) Robot movement range J1± 160 ° J2+ 150 ° - 35 ° J3+ 165 ° - 150 ° J4± 190 ° J5± 120 ° J6± 360 ° Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Prsdpfx Aewbqvfsazob More items - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 26, functionality: fully functional, input voltage: 400 V, total height: 1,700 mm, total length: 6,100 mm, total width: 1,450 mm, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of units: 7 1. Unit: Pre-milling unit Tools included 2. Unit: Gluing unit 3. Unit: Crosscut unit Tools included 4. Unit: Rough milling unit Tools included 5. Unit: Edge rounding unit Tools included 6. Unit: Radius drawing unit Tools included 7. Unit: Flat drawing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 39.5 A Fuse rating: 50 A Number of transport packages: 1 Dimensions & Weight Dimensions (L x W x H): 6,100 x 1,450 x 1,700 mm Weight: 2,500 kg EQUIPMENT Tools for pre-milling unit Tools for crosscut unit Tools for rough milling unit Tools for edge rounding unit Tools for radius drawing unit Tools for flat drawing unit Pjdpfx Ajz Eahgjazsrb CE marking

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 4912, functionality: fully functional, cutting height (max.): 500 mm, cutting width (max.): 770 mm, overall weight: 1,200 kg, saw band length: 5,540 mm, saw band width: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting length up to feed roller: max. 225 mm Cutting length up to stop: max. 210 mm Cutting width up to column: max. 770 mm Cutting height: max. 500 mm Saw blade width: max. 80 mm Saw blade length: min. 5,380 mm Saw blade length: max. 5,540 mm Wheel diameter: 800 mm Table width: 1,200 mm Prodpfez Ea Iaox Aazsb Table length: 800 mm Table: Adjustable MACHINE DETAILS Dust extraction port diameter: 120 mm Voltage: 400 V Power consumption: 31 A Fuse: 63 A Main motor power: 15 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,800 x 2,100 x 2,380 mm Weight: 1,200 kg EQUIPMENT Adjustable table CE marking Feed rollers, automatic, electric

Condition: excellent (used), Bosche volume scale 3D Silence 600 Volume and weight recording for master data recording and master data maintenance in the warehouse Precise volume and weight measurement for warehouse management and order picking. Non-contact measurement with laser sensors Weighing range up to 150 kg Easy integration into IT systems Ideal for precise freight calculation and master data recording ✔ Professional weighing technology ✔ Original BOSCHE quality Fast - Accurate - Reliable Features of the volumetric scale Static volume measurement of parcels Fast, non-contact dimensional measurement of packages Measuring frame made of powder-coated steel Low construction height for easy placement of parcels Weighing range 30 kg, 60 kg or 150 kg (weighing accuracy up to 10 g) Reliable weighing thanks to three calibratable, laser-welded load cells Three high-quality laser distance sensors with laser class 2 Measuring accuracy up to 1.5 mm Maintenance-free and wear-free design of the weighing technology Simple handling with high ease of use Easy integration into merchandise management and shipping systems Direct connection to existing PC systems via USB interface (or optionally via W-LAN) Data transfer to higher-level IT systems or WMS (warehouse management systems) in modern languages (SQL, CSV, REST) Simple process integration thanks to WINDOWS 10 operating system (WINDOWS network client) Intuitive software provides all data at a glance Weighing platform (powder-coated steel) 3 high-precision load cells (BOSCHE) Digital cable box with interface output Power supply via mains adapter Measuring stops for measuring non-cubic objects Area of application Prsdpfx Aaevtmp Tjzsb Parcel measurement => length x width x height => girth => volume measurement (accuracy to 1.5 mm) Master data acquisition - freight checkpoints Air freight control - Freight acceptance Packaging planning - calculation of packaging sizes for optimal shipping Capacity planning - planning of storage locations Profitability check of storage space and packaging processes Optimized forklift trips Best possible storage space utilization for trucks Master data acquisition in seconds: height, length, width, weight Weighing technology - measurement technology The scale platform is connected to a Windows PC via an interface. The software included in the scope of delivery visualizes weight and dimension data directly on your Windows computer. The calculated volume and volume weight are also displayed. Construction The extremely flat weighing bridge substructure made of powder-coated steel is extremely robust. It is equipped with three laser-welded load cells. Volume measurement is provided by three high-quality laser distance sensors of laser class 2, which measure the length, width and height of the package to an accuracy of 1.5 mm. For optimum integration into your processes, the BOSCHE 3D scale is available in three different sizes. Weighing range: 30 kg, 60 kg or 150 kg. Supplied without software HxWxD = 1000 x 780 x 780 mm Product video Volume scale 3D Silence: List price € 8,663.00 gross Software VolumeScannerProfessional: 1.236,00 € gross Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, number of blades: 63, rotor width: 1,150 mm, rotational speed (max.): 1,470 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rotor width: 1,150 mm Number of rotating knives: ± 63 Screen perforation: 20 mm Opening width: 2,580 mm Opening length: 2,180 mm Stroke of hydraulic slide: 1,000 mm Oil tank capacity: 75 l MACHINE DETAILS Prjdoz Eba Repfx Aazob Main motor power: 30 kW Speed: 1,470 rpm Hydraulic unit power: 3.4 kW Number of axles: 1 Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,850 x 1,550 mm Unladen weight: 5,000 kg Transport packages: 2 EQUIPMENT Hydraulic slide

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 0-200-95-6633, functionality: fully functional, input voltage: 400 V, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Number of units: 6 1. Unit: Pre-milling unit Manufacturer: Nordson Tools available 2. Unit: Gluing unit Pedpfoz Eazysx Aazjrb 3. Unit: Pressure rollers Tools available 4. Unit: Rough milling unit 5. Unit: Cutting unit 6. Unit: Fine milling unit MACHINE DETAILS Voltage: 400 V Current consumption: 41 A Fuse rating: 50 A Transport packages: 5 Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Unladen weight: 3,500 kg EQUIPMENT Nordson unit, year of manufacture 2017 CE marking

Year of construction: 2010, condition: good (used), Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until 02/2022 Advanced AE immunoassay technology Meet clinical needs with acridinium ester (AE) technology that provides the flexibility and sensitivity needed for new and innovative assays. Comprehensive diagnostic clarification of various disease patterns thanks to a test menu with over 70 different assays. Simplified inventory management and reduced costs by using the same ready-to-use reagents on all ADVIA Centaur analysers. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded on the fly. Easier training and operation thanks to an intuitive, icon-based user interface. Less operator intervention as daily maintenance is low and the system does not need to be cleaned monthly or booted up daily. New and updated test definitions can be read in by the customer by simply scanning the 2D barcodes included in the usage information. Predpfxshr Rw Ie Aazeb Consistent, predictable turnaround time (TAT) and accuracy Up to 240 tests/hour for short turnaround time even during peak periods. Rapid prioritisation of emergency samples possible at any time thanks to a dedicated access (STAT port). Disposable pipetting tips prevent carry-over and contamination of samples. Automatically perform repeat and confirmatory testing for reactive hepatitis B surface antigen samples using Siemens Healthineers SMART algorithms. Direct connectivity Adapt to different sample volumes with easy connection to Aptio and VersaCell® X3 automation solutions. Efficient operation thanks to diagnostic IT including CentraLink® data management system Atellica Process Manager and Smart Remote Services for Diagnostics Direct pipetting from the automation solution through point-in-space technology. Shorter turnaround times for emergency samples thanks to a dedicated STAT port that allows front loading of emergency samples even when connected to an automation solution. Technical specifications Product specifications System type: Random access immunoassay system Throughput: Up to 240 tests per hour Time to first test result 18 minutes, further results every 15 seconds (method dependent) Method capacity on board: 30 test methods Indication groups§§ Allergy, anaemia, diabetes, fertility, hepatitis, HIV, immunosuppressants, infectious serology, cardiology, Bone metabolism, Liver fibrosis, Adrenal function, Oncology, Thyroid diseases, Sepsis, Therapeutic drug monitoring (TDM) Continuous operation Loading and unloading of samples and consumables at any time during continuous operation. This includes sample racks, emergency samples, reagents, ancillary reagents, reaction cuvettes, sample tips, calibrators, controls, wash solutions, water and waste. Samples and sample management: Sample tubes 3 ml, 5 ml, 7 ml and 10 ml tubes, 1 ml and 2 ml secondary tubes, micro tubes Financing through our bank is also available. komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Watson Marlow 120U/DV peristaltic pump *New price 9100 The 100 series pumps are the ideal choice to maximize yield in fermentation and cell culture applications. These pumps offer not only high performance and reliability, but also ease of use for single-use systems. A flawless tube change takes only a few seconds, further increasing the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series, with its exceptional speed range of 2,000:1, offers the flexibility and purity essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Technical data: Protection class housing IP 31 Maximum pressure 30 psi Model 120 U/DV Flow rate 0.001 to 170 ml/min at 30 psi Motor speed 0.1 to 200 rpm Temperature 5 °C to 40 °C Pump weight approx. 2 kg Torque 0.4 Nm continuous operation Noise level < 60 dB(A) at 1 m distance Standard CE, cETLus Power supply Supplied with 24 VDC mains transformer plug Podpfxjttzgds Aazorb Condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more laboratory devices - new and used - in our store! International shipping costs on request!

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory Podpfx Ajibh Tksazerb • Applicator Interface • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing through our bank is also available. komplett-konzept.leasingo.de Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 31 504, functionality: fully functional, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, overall weight: 700 kg, plate height: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 2,200 mm Maximum horizontal cutting height: 2,100 mm Maximum cutting width: 5,300 mm Prodsz Ea Imspfx Aazsb Maximum cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm MACHINE DETAILS Voltage: 400 V Current draw: 10 A Fuse rating: 16 A Power: 4.4 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 6,660 x 2,070 x 3,010 mm Weight: 700 kg FEATURES CE marking Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Prodjz Ebbzspfx Aazeb Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Oi-MC, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 510 mm Prjdpfx Aoz Ebb Ueazsb Table length: 1,200 mm Table width: 510 mm Orientation: Horizontal Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Tool positions: 24 MACHINE DETAILS Control: CNC Control system: Fanuc Oi-MC Number of axes: 3 Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Shipping packages: 3 Operating hours: 3,010 h EQUIPMENT Spindle cooling Documentation CE marking External cooling Tool magazine Chip conveyor Tools included

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, total width: 1,410 mm, overall weight: 2,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS UNITS Number of units: 10 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Edge rounding unit 7. Unit: Fine milling unit 8. Unit: Edge rounding unit 9. Unit: Radius drawing unit 10. Unit: Brushing unit ELECTRICAL DATA Voltage: 400 V Power: 16.2 kW MACHINE DETAILS Year of manufacture: 2020 Color: Gray CE marking: present Serial number: 20.082 Length: 6,000 mm Width: 1,410 mm Height: 1,670 mm Weight: 2,200 kg Transport length: 6,000 mm Transport width: 1,415 mm Transport height: 1,670 mm Transport weight: 2,200 kg Transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Psdez Eawzjpfx Aazsrb Tools for trimming unit Tools for rough milling unit Tools for edge rounding unit Tools for fine milling unit Tools for radius drawing unit Tools for brushing unit

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2012 1140, total width: 1,700 mm, total height: 1,500 mm, total length: 1,200 mm, empty load weight: 500 kg, Equipment: dust extraction, No minimum price – guaranteed sale to the highest bidder! For sale is a machine set consisting of a briquetting press and a dust extraction system! MACHINE DETAILS Prjdpfxoz Eaw Us Aazsb Transport packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,700 x 1,500 mm Unladen weight: 500 kg EQUIPMENT Briquetting press Dust extraction system

Condition: used, mileage: 547,604 km, power: 338 kW (459.55 HP), first registration: 08/2003, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, gearing type: mechanical, emission class: euro3, Equipment: parking heater, Well-maintained MAN 27.460 suction/flushing combination unit from Müller, Canalmaster F130 EG, with a remote control, a telescopic boom, and a Rottec Tec 200 vacuum pump with a Uraca high-pressure pump (P3-45/60). - Müller combination suction/high-pressure flushing unit - Canalmaster F130 EG - Rottec Tec 200 vacuum pump, rotary compressor vacuum pump, water-cooled - Max. 1500 rpm, 1170 m3/h max. flow rate with free passage - Uraca P3-45 high-pressure pump with 205 bar and 330 l/min - Piston extension – pneumatic - Combination cassette boom - Remote control Prjdpszuq U Esfx Aazsb - Tank capacity: 13,000 liters - 10,500 liters sludge - 2,500 liters fresh water - Discharge/emptying piston as an adjustable partition between sludge and water chamber (3-stage pneumatically adjustable) - Suction/emptying nozzle DN 100 (shut-off slide valve) - Ball valve as a second shut-off valve on the outside. Level indicator on the rear side - Flushing system: HD hose reel DN 25, hydraulically swivelable approx. 180° to the left - HD hose reel DN 13 - Cassette boom: Suction hose cassette DN 100, hydraulically extendable approx. 1250 mm - Approx. 17 m hose length, approx. 8 m lifting height. Connection arm fittings with tanker couplings (brass) DN 100 - Storage compartments: Hoses on both sides, tool/equipment cabinets with approx. 140 liters capacity - 6x2 drive axles - German vehicle, second owner - Leaf spring suspension - Air-suspended cab - Cruise control - Differential locks - Radio - Auxiliary heater - Bed - Dual H-shift transmission - Financing available through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer it on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, and errors. We strongly recommend and encourage an inspection and assessment to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and assessments are possible and expressly desired by appointment.

Condition: excellent (used), functionality: fully functional, mileage: 80,400 km, fuel type: diesel, empty load weight: 22,430 kg, overall weight: 22,590 kg, axle configuration: 6x6, wheelbase: 3,700 mm, axle spacing: 1,320 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 2, total length: 10,850 mm, total width: 2,500 mm, total height: 3,760 mm, Year of construction: 1990, Equipment: hill-start assist, tachograph, An authorized SUBARU dealer in Łaziska Górne offers for sale: TATRA T815 6X6 / 20 TON CRANE – a unique 1990 heavy-duty truck equipped with a professional BUMAR crane body. The vehicle is in good technical condition and has had only one owner. It is ideal for heavy construction and transport work. Thanks to its 6x6 drive, it is perfectly suited for operation in difficult conditions. We offer the option of installing a lattice boom (extension) that will increase the reach from 21m to up to 30 meters. The Tatra has two engines – one for the truck, in excellent condition, running smoothly and reliably. The second engine is a ZETOR, mounted on the crane. The price includes a complete set of documents for registration. If a UDT inspection is required, we can also perform it quickly and for a fee. We offer every form of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the vehicle away from the showroom immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Weights and dimensions: GVWR: 22590kg Unladen weight: 22430kg Crane lifting capacity up to 20 tons – depends on the installed pulley and the number of ropes. External dimensions: Length: 10850mm Width: 2500mm Height: 3760mm Wheelbase: 3700mm + 1320mm Engine type: T3-929.34 Capacity: 15825cm3 Power: 208kW Drive: 6x6 Equipment: Differential locks Fog lights Cabin heating Wipers Additional orange lighting 12V socket Tachograph with paper chart – a nice feature ☺️ Sunroof Spare wheel Predey S R H Eopfx Aazob Turn signals Additional lighting for the crane body Inspection report: The truck arrived from Slovakia under its own power without any problems. The crane was tested and is functioning correctly. The Tatra switches between drive modes, the engine runs smoothly, and the gearbox operates correctly. No significant signs of corrosion. The chassis is professionally preserved. The stated price is the net price of PLN 79,900 and applies to export and for businesses. A discount is possible for individual customers. We invite you to contact us directly by phone to get your best price :)

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Psdpfx Aozvwp Ejazsrb Max Panel Thickness: 35 mm Max feed speed: 30 m/min Distance between dogs: 320 mm

Condition: used, Year of construction: 2006, Operational condition. Podpfjxva Dlox Aazorb Lightning Head Left-to-Right PCB Transfer Direction 3mm (0.117") Edge Clearance HSC Nozzle Changer Kit Fixed 36 Slot Feeder Bank 4" Outbound Rear Single Lane Brd Support 30-SPINDLE HEAD PERFORMANCE KIT UPGRADE KIT, ACCURACY ENHANCED SPINDLE Second Rear Interface

Year of construction: 1981, condition: ready for operation (used), functionality: fully functional, empty load weight: 8,300 kg, filling opening length: 600 mm, filling opening width: 430 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Filling opening: 600 × 430 mm Prjdjz Ebdcopfx Aazeb MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,700 × 1,600 × 2,800 mm Unladen weight: 8,300 kg Frequency: 50 Hz Voltage: 420 V Motor power: 55 kW Current consumption: 95 A

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, sheet thickness (max.): 32 mm, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,500 mm Max. material thickness: 32 mm MACHINE DETAILS Drive system: CNC Control system: Beckhoff Prsdpfjz Ebclex Aazeb Resonator manufacturer: Hypertherm Resonator type: Powermax 105 Connected power: 16.8 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Shipping weight: 3,000 kg Shipping packages: 1 unit EQUIPMENT Various accessories Spare parts Note: The machine is sold without a dust extraction system.