Used Teak Bank for sale (1,366)

Year of construction: 2004, condition: used, 2004 Kuntz 626 Single Bank Spotting Unit With Touchscreen Control Blodpfx Alsz E Rwfs Aen Table Dimension 430 x 400mm. With Safety Light Guards, Spare Parts & Manual. (2004).

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Bjdpfx Alozvh Dyj Aoln Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: used, This listing is for a Immucor Galileo ECHO Automated Blood Bank Analyzer The Galileo Echo a microprocessor-controlled instrument designed to fully automate irnrnunohernatology in vitro diagnostic testing of human blood. The Galileo Echo automates test sing, result interpretation and data management functions. The Galileo Echo is designed to automate standard imrnunohematology assays using a microstrip-based platform. Assays include A60 grouping and Rh (D) typing, detection1 identification of IgG red blood cell antibodies, compatibility testing and red blood cell phenotyping. The Galileo Echo is a closed system intended for use only with the reagents specified in the Galileo Echo Operator Manual. All of the Galileo Echo functions are fully automated, including: sample and reagent handling, pipetting, incubation, washing, shaking, centrifugation, reading and interpretation of results. Automated process controls and error detection mechanisms significantly reduce or eliminate opportunities for user error and invalidate suspect results. Advantages: Full Automation. Continuous Access. Fast Turnaround Time. STAT Priority. Broad Test Menu. User Friendly Interface. Error Free Processes. Reflex panne. Test Menu Assays include: ABO Type Reverse Type Donor Confirmation ABO Type Newborn Rh and Kell Phenotype Weak D Antibody Screen (3-cell) Antibody Identification (3 panels) Crossmatch DAT (IgG) Bljdpfx Aoxzhw Djl Aen

Condition: like new (used), Year of construction: 2002, functionality: fully functional, nominal power (apparent): 1,100 kVA, continuous power (apparent): 1,100 kVA, Choice of 4 - Piller 1100 KVA Gensets- Ex Bank data center standby generators, Piller generator V16 MTU 16V4000 engines, have only done test hours, as new. Contact us for further details Bodpfx Aezxy Ucel Ajln

Condition: used, This listing is for a Labcold Blood Bank RDBB11601 Laboratory Refrigerator. Bedjxx Awtopfx Al Asln The unit is in full working condition and is ready for immediate release. .

Year of construction: 2009, condition: used, BANG CRANE LIFTING BOOM CAPACITY 3.2t Bjdpfxewar Dbe Al Aeln ARM LENGHT 5000mm ARM LENGHT OF STROKE 4000mm MADE IN GERMANY

Condition: excellent (used), Year of construction: 2015, Henneken HT520 steaker  / lacerator in superb condition. This machine is perfect in ham production - gives larger surface area, improved protein activation, improved binding, shorter tumbling/mixing time, improved product tenderness and reduction of cooking loss. Blsdpfoxxd E Esx Al Ajn

Condition: excellent (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 2 UNITS AVAILABLE. Key specifications: Bljdpfx Ajx R Szuol Asn - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 3,000 kg, permissible axle load (axle 2): 3,000 kg, first registration: 07/1995, loading space length: 5,470 mm, loading space width: 2,340 mm, total width: 2,460 mm, wheelbase: 880 mm, color: other, Year of construction: 1995, Axle configuration Rear axle 1: Max. axle load: 3000 kg Rear axle 2: Max. axle load: 3000 kg Weights Empty weight: 1.640 kg Carrying capacity: 4.360 kg GVW: 6.000 kg Functional Height of cargo floor: 55 cm Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good Identification Registration number: WN-80-YX = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Blsdjz Ihpkepfx Al Aon Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, This listing is for the The unit is in full working condition and is ready for immediate useThe Labcold RDBG2320MD Upright Bloodbank Refrigerator is a medical-grade refrigeration unit designed specifically for the safe and compliant storage of blood and blood products in laboratories, hospitals, and clinical environments. Bedpjyrg S Njfx Al Ajln Engineered for reliability and temperature stability, this upright blood bank refrigerator maintains the strict temperature range required for blood storage, helping to ensure the integrity and safety of stored samples. The unit features precise digital temperature control, uniform internal cooling, and built-in monitoring systems that help laboratory staff maintain regulatory compliance. Its upright design provides efficient use of laboratory space while offering ample internal capacity for organised blood storage. Clear internal shelving and robust construction make it suitable for high-demand medical and research environments where reliability and consistent performance are essential. The refrigerator is equipped with alarms and safety features designed to protect valuable biological materials by alerting users to temperature deviations or operational issues. This makes it an ideal solution for blood banks, research laboratories, hospitals, and clinical facilities that require dependable cold storage for sensitive biological products. Typical applications include: Blood banks Hospitals and clinical laboratories Medical research facilities Sample and blood product storage

Condition: good (used), Year of construction: 2014, Dustomat P-20 Mobile Dust Extractor with Flexible Extraction Arm The ESTA DUSTOMAT P-20 mobile dust extractor is a unit specifically designed for professional dust extraction, meeting the highest air purity standards in industrial and commercial settings. With its robust construction, compact design, and ease of use, this model offers a reliable and efficient solution for removing both fine dust and coarse particles. Compared to similar dust extraction systems, the unit stands out due to its high air volume flow, generously sized dust collection bin, and the long service life of its filter elements. Areas of Application: Single- and multi-station extraction in industry and skilled trades Free-flowing dusts Dry chips/shavings Particularly suitable for wood dust Welding fumes and metal dust Metal chips and grinding dust Key Features: Automatic jet-pulse filter cleaning Integrated pre-separator (baffle plate) Cleanable permanent filter cartridges (Dust Class M) Test certificates: H3 (HO 113002); GS (HO 113001) Testing standard: GS-HO-07 (01/2010) Residual dust content H3 < 0.1 mg/m³ Your benefits at a glance Compact and powerful Bodpfxsz E D D Es Al Aeln Low operating costs Easy dust disposal Can be used as a mobile single-workstation extractor or a central extraction system Suitable for almost all types of dust, especially wood dust* Optional certification mark available for special applications Technical data: Manufacturer: Esta Type: P-20 Supply voltage: 400 V, 50 Hz Drive power: 3.0 kW Rated current: 6.4/16 A Nominal air flow: 1,832 – 2,600 m³/h Negative pressure: 2,300 – 3,400 Pa Compressed air (max.): 4 – 6 bar Filter area: 20 m² Number of filter elements: 2 Filter cleaning: Jet-Pulse Intake nozzle: 180 mm Dust container: approx. 200 liters Dimensions (L x W x H): 1,650 x 830 x 1,980 mm Weight: 370 kg Year of manufacture: 2014 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity Bsdpfxoz Agv Ue Al Asln - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Bjdpfx Aloz Agw Es Ajln - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Blodpfjz Ag Rrsx Al Ajn - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, mileage: 231,482 km, power: 175 kW (237.93 HP), first registration: 04/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 10,350 mm, total width: 2,590 mm, loading space length: 8,040 mm, loading space width: 2,440 mm, loading space height: 2,530 mm, Year of construction: 2013, Tail lift: BAR CARGOLIFT, tail lift WDB9630031L743748 Cool unit brand: Carrier = More information = Number of cylinders: 6 Engine capacity: 7.698 cc Empty weight: 10.720 kg Carrying capacity: 8.280 kg GVW: 19.000 kg Cooling engine: diesel and electric Price: On request Registration number: 91-BBS-1 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) Bodjz Ihutepfx Al Aeln BIC/SWIFT: INGBNL2A

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Bjdozz Rpcspfx Al Aeln - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Bledpfxez Hm Ips Al Aon Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Padelttherm HGU 9408/800 Hearth Furnace with Recirculating Air For sale is a professional Padelttherm heat treatment system / hearth furnace with recirculating air, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth furnace with air circulation. Two chain conveyors are also part of the documented overall system. Technical data: Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth furnace with recirculating air / heat treatment system Material processed: Aluminum housings Temperature / Heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. gross load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower calorific value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Recirculation - 4 burners, each 130 kW - 2 with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per recirculator - 2 hot gas recirculation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas recirculators: 2 × 4.0 kW - Combustion fan: 7.5 kW - Lift-up door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch Blsdpfoz Hvzrex Al Aen - Control behavior: PID - 10 programs - Display / Operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Internal dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth including track: 10,165 mm - Height including door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), mileage: 295,097 km, power: 177 kW (240.65 HP), first registration: 06/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,350 mm, total width: 2,590 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 8,140 mm, loading space width: 2,440 mm, loading space height: 2,540 mm, Year of construction: 2013, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, = Additional options and accessories = - Central lubrication system - Radio/CD player - Rear doors - Side door - Sun visor - Tailgate = More information = General information Number of doors: 2 Colour: Purple Cab: single Registration number: 56-BBV-3 Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Front axle: Max. axle load: 7500 kg; Steering Max. rear axle load: 11500 kg Weights Empty weight: 10.820 kg Carrying capacity: 8.280 kg GVW: 19.000 kg Max. towing weight: 32.000 kg Functional Tail lift: BAR CARGOLIFT, tail lift Cooling engine: diesel and electric (11367 operating hours diesel) Condition Technical condition: very good Visual appearance: very good Financial information Bsdpfxsz Ihu Ho Al Aeln Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW Bsdpouubctefx Al Asln 2 steps of +/- 125kW Other steps possible in consultation External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. 20Ft container

Condition: excellent (used), mileage: 630,553 km, power: 169 kW (229.78 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 8,150 mm, loading space width: 2,490 mm, loading space height: 2,340 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, power mirror, spoiler, tail-lift, = Additional options and accessories = - Aluminum fuel tank - Enhanced engine brake - Radio/CD player - Roof Spoiler - Side door - Sun visor - Tailgate = More information = General information Number of doors: 2 Cab: single Registration number: 2KBC055 Axle configuration Front axle: Steering Rear axle: Double wheels Weights Empty weight: 7.670 kg Carrying capacity: 8.130 kg GVW: 15.800 kg Functional Tail lift: dhollandia DHLM 20, tail lift, 2000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Bjdpfxoz Ihngo Al Aeln If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, Folding bench ZGR3000/0.8 of prod masz company local to the try out and equal to the take. You get professional instruction on the spot. Folding bench ZGR3000/0.8 Working width 3140 mm Thickness 0, 8 mm Bending angle up to 145° Gas pressure spring Scala of degree of Velocity for preset bending angle Hanger depth stop Tray for sheets Bsdszbmzcepfx Al Aoln Weight approx. 450kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand Accessories Rollenschere(bis 0,8mm) 350EUR All prices are with plus 19% VAT. Certificate CE Warranty: 12 months Pickup 360EUR shipping within Germany

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. Bjdpfxer Eyyce Al Aeln We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. We are looking forward to your request.

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. Bedpfx Aoydh Agol Asln 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: excellent (used), mileage: 261,666 km, power: 70 kW (95.17 HP), first registration: 11/1977, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, number of seats: 3, total length: 4,540 mm, total width: 2,190 mm, total height: 2,980 mm, Year of construction: 1977, Equipment: trailer coupling, = Additional options and accessories = - 3 chairs = More information = General information Number of doors: 2 Cab: single Registration number: SLS2322 Bledsz Ezb Iopfx Al Asn Technical information Engine capacity: 5.638 cc Front axle: Steering Weights Empty weight: 4.500 kg Carrying capacity: 3.500 kg GVW: 8.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A