Used Second Operation for sale (28,262)

Condition: used, PLC, control panel, operator panel, control machine Iedpfsdpmmyex Aadjan -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS -Type: Sinumerik 810D/840D PCU50 -Dimensions: 482/310/H140 mm -Weight: 11.5 kg

Condition: used, PLC, control panel, operator panel, control machine -The front of the control panel comes from: a Hitachi Seiki type HC400 machining center -Manufacturer: Hitachi Seiki -Control: FANUC -Dimensions: 400/310/H100 mm Ijdpfx Aasdryd Eedsan -Weight: 3.8 kg

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel -Manufacturer: SIEMENS, Operator Panel OP20/240-8 -Type: 6AV3520-1EL00 -Dimension: 310/220/H135 mm Iasdpfx Ajhzzcveadon -Weight: 2.8 kg

Condition: used, Simatic panel, operator panel, machine control, interface panel, control unit, control unit, control panel -Manufacturer: SIEMENS, Operator Panel Coros OP15-C1 -Type: 6AV3515-1MA20-1AAO -Dimensions: 240/50 / H170 mm Ijdpfx Aeg S Dk Aeadjan -Weight: 1.2 kg

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below Ijdpjxz Ulzjfx Aadjan - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, From our own operation – used until recently, immediately ready for use, collection only – test run possible Iajdpfoyg N D Dsx Aadjn

Condition: excellent (used), For sale: Original Ziegler FP 8/8 (DIN 14420) portable fire pump with the legendary Volkswagen air-cooled engine – 1192 cm³ displacement, 34 HP. ✅ Key specifications: • Manufacturer: Albert Ziegler Giengen/Brenz (Germany) • Model: FP 8/8 • Year of manufacture: 1974 • Engine: Volkswagen Type 122 – 1.2 petrol, 34 HP at 3600 rpm • Pump capacity: 800 l/min • Head lift: 80 mWS • Rated speed: 4000 rpm • Weight: 190 kg • Gear ratio: 1:1.45 • Operating hours: 16.3 h – practically like new! ✅ Condition & features: • The fire pump is complete and in fully original condition. • Nameplates and markings are intact. • The VW engine starts easily and runs smoothly. • Mobile design, easy to transport. • Ideal for a museum, collection, display, or as a reserve unit for a volunteer fire department. 🔥 Unique – VW Beetle engine in fire service! Volkswagen engines used in Ziegler pumps are highly valued today – reliable, easy to service, and collectible. 📦 Collection in person or transport upon arrangement. Isdpfxjxa En Re Aadean

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Ijdpjqvuicjfx Aadoan

Condition: used, Year of construction: 2016, functionality: fully functional, The device is fully operational. A second identical DC 1000i printer for spare parts included FREE of charge. Iajdpfx Asykafmjadjn Photos and additional information coming soon.

Condition: ready for operation (used), Mitsubishi MB974A Operation Board SN:9404007, used, normal signs of use, 100% functional, scope of delivery as per photos Iaedpfx Aasi Eb Npoden

Year of construction: 2017, condition: like new (used), functionality: fully functional, Infoterminal – Indoor Terminal for 24/7 Continuous Operation Kiosk System ISIS 21.5" Touchscreen by eKiosk Indoor kiosk system (freestanding unit) Elegant design with curved front Very shallow installation depth (60mm) Access via security lock Standard color: Black; profiles in anodized aluminum Floor mounting or freestanding installation Touchscreen 21.5", Full HD (1920x1080); 16:9: Industrial quality for continuous operation Multitouch (DUAL Touch, projected capacitive) Protective glass panel – flush surface (no dirt edges) G: RAL 9005 GM Deep Black P: Silver anodized Equipped with industrial PC Dimensions (HxWxD): 163x63x53 cm The eKiosk is the modern alternative to traditional bulletin boards – information for visitors, announcements, etc. Information terminal – information via display Price / details available on request All technical specifications are subject to errors and omissions. Iajdpfx Ajwlqvasadjn We sell exclusively to countries within the European Union.

Condition: excellent (used), Year of construction: 2016, operating hours: 28,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 550 mm Max. daylight 1250 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 55 mm Ls/D ratio 23 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 87 kN Ijdpfexz Tq Njx Aadsan Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,10 x 2,10 m Total machine weight 11500 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads Additional Options: - Electrical plasticizing motor - Accumulator - 2 x Air valves - 2 x core pulls on movable plate - 1 x core pull on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: like new (used), Year of construction: 2021, operating hours: 44 h, load capacity: 2,000 kg, lifting height: 1,724 mm, fuel type: electric, mast type: duplex, construction height: 1,390 mm, mileage: 44 km, AS GOOD AS NEW Iajdpsxhdhxefx Aaden This 2021 Still electric DUO stacker is in excellent condition; Capacity: 2,000 kg; The stacker lifts up to 1,724 mm; Drive-through height: 1,390 mm; Equipped with INITIAL LIFT, making it ideal for uneven floors; ONLY 44 hours on the clock! The 2021 battery features an automatic filling system and an external charger; Schedule an appointment for a test drive. Watch the video on YouTube.

Condition: ready for operation (used), many parts overhauled and renewed Iedpfx Asxxb Ukjadean

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 000929, saw blade diameter: 350 mm, pivoting range: 35 °, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC TYPE TD1200 CA - CE RULES - N.2 motors 2 hp - Blade diam. 350 mm - Min/max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Complete with manual and CE declaration - With automatic loader - Serial no. 000929 - Year: 2001 - CE rules Iasdpfjx Rvmbsx Aadon

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm Iajdpfx Aaov Svc Tsdjn stroke 260 mm weight of the machine ca. ca. 750 kg

Condition: as good as new (ex-display), functionality: unexamined, Ferwood Code: RS0003033 - Manufacturer Code: 0058060-1110 - Condition: Like new (display item) - Functionality: Untested - If interested we offer a revision service, contact us. Iasdpjv Azafofx Aadsn

Condition: excellent (used), Perconta Contomat High-Performance SB Coin Settlement Terminal Contomats are relieving bank employees of more and more routine tasks. Iedpfx Aasivd E Todean The trend that set the standard with automatic cash dispensing and statement printing continues in coin processing with the Contomat. If you are looking for a solution for the customer-oriented deposit of hard cash, the Contomat self-service terminal is the perfect choice. You can find more coin processing terminals in other sizes - new and used - in our store! International shipping costs on request!

Condition: refurbished (used), Various Crane / Depa pumps, various designs and sizes, cpl. refurbished and available at short notice Iaedpofcy A Iefx Aadjn

Condition: refurbished (used), Various Almatec pumps, plastic version, all sizes of the A series, some also E series, cpl. reconditioned, immediately available Ijdpjfcy Anjfx Aadsan

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Iodpofv Av Defx Aadjan Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm Iedpfx Asfv Av Ieadean weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: like new (used), STOCK AVAILABLE AT Type: KFV-400-3-A15 Manufacturer: SMW Condition see pictures (in stock) Description: • Power operated 3-jaw special wedge hook chuck. • Designed for external and internal clamping • Centrically clamping • Spindle side mounting according to DIN 55026, size A15 • With individually adjustable base jaws • Top jaw side interface with 3/32 "x90° pointed teeth • Chuck outer diameter: 400 mm (Swing: 430mm) • Adjustment range / jaw: +/- 1.5 mm • Center position is indicated by indicator pin • Chuck actuation stroke: 42mm • Jaw stroke: 10,7 mm Iaodpfxshg Tdde Aadon • Max. actuating force: 72 kN • Max. Clamping force: 180 kN • Max. Speed 2000 1/min.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 3-jaw power chuck KNCS-NBX 1000-262, B20, Iasdpfx Aasx Azmnjdon with quick jaw change, SMW Autoblok, incl. additional threads on front side of chuck,

Condition: ready for operation (used), Year of construction: 2010, operating panel for Lisec machines Iasdpol Dwrpefx Aaden