Used Series Hole Punch for sale (8,091)

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm Lodpfx Abjw Dccvs Nsah -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm -Weight: 207 kg

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm Ledpfx Aexzk I Ssb Neah sheet width 40 mm

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9174, total height: 3,400 mm, ram adjustment: 100 mm, installation height: 530 mm, total width: 2,150 mm, total length: 1,450 mm, pressing force: 100 t, clearance between the columns: 830 mm, overall weight: 15,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 100 t, The machine is completely overhauled and finished, including new Siemens S1500/MTP1000 press control. Upright spacing: 830 mm Distance table to ram: 530 mm Stroke adjustment: 10 - 120 mm Ram adjustment: 100 mm Ram strokes/minute: 30-120 Ledpfxsx U Ucps Ab Neah Delivery time: immediately Price on request

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Shimadian, Thyristor power controllers -Type: PAD36-Series Lajdpfeyhblcjx Ab Nsh -Number: 2x power controllers available -Price: per piece -Dimensions: 430/260/H255 mm -Weight: 18.4 kg/pc.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Lajdpfx Absw E H E Ro Njh Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Center height: 410 mm Lodpfjw H Arvjx Ab Noah Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table top; T-slot design can be freely selected) Ram size: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020.

Condition: used, Offer 41414 Ledoxhfhmepfx Ab Njah Guide unit for punching tool suitable for AMADA type EMK 3612

Condition: used, Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA50-150 -Projection: 150 mm -Dimensions: 275/80/H140 mm -Weight: 10.3 kg Lsdpfxov Rlwks Ab Neah

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Laodpfx Absyxpaws Neh Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN Laedpsxvch Tsfx Ab Nsh YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, total width: 2,440 mm, total length: 3,320 mm, total height: 2,130 mm, overall weight: 8,200 kg, input frequency: 50 Hz, input current: 30 A, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, space requirement width: 2,440 mm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Lsdpfex Hzm Sjx Ab Neah

Condition: used, Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Ledpfex Rdc Rsx Ab Noah Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Daumenloch Druchmesser 20mm Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Thumb Cut 20mm  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm Laedpfx Aow I Um Heb Noh with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lodpfoyilgdsx Ab Njah

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg Laedpszzk Dmefx Ab Njh

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Laedpezr Ha Eofx Ab Neh

Condition: used, Year of construction: 2005, Punching capacity 220 kN plate thickness 8 mm working area 2535x1280 mm sheet thickness for stainless steel 4-6 mm Lasdpezk Rfijfx Ab Nsh

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Intermediate block -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm Lodpezm Samjfx Ab Nsah -Weight: 6.8 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Stamping tool: die holder -Hole: Ø 35 mm -Dimensions: see photos -Dimensions: 235/105/H130 mm -Weight: 11.1 kg Lsdpfx Abszm Satj Nsah

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block -Dimensions: see photos Lasdpfxszm Sd Sj Ab Noh -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm Ledpfx Aboznafys Noah -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1085x885 mm, height 2185 mm -Wall thickness: 70 mm Lsdpfxszav Dws Ab Njah -Threaded holes: M20 -Dimensions: see photos -Number: 2x mounting brackets available -Price: per piece -Dimensions: 885/1085/H2185 mm/piece -Weight: 2280 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK AEM-1080Q is a fully automatic, high-performance die-cutting machine with a stripping station, specifically designed for the precise processing of cardboard, solid board, and corrugated board. It is ideally suited for the production of high-quality packaging with exact die-cut contours and clean removal of the die-cut waste. Thanks to its robust construction, high die-cutting force, and modern automation, the KMK AEM-1080Q offers maximum productivity while maintaining the highest precision. It is the perfect solution for packaging manufacturers who rely on speed, reliability, and first-class quality. ### Highlights * Fully automatic die-cutting machine with integrated stripping station * Die-cutting force up to 350 tons * High production speed of up to 6,500 sheets per hour * Precise die-cutting accuracy of ±0.1 mm * Suitable for cardboard, solid board, and corrugated board * Automatic feeder and delivery system * High production reliability and ease of operation * Robust industrial design for continuous operation * Short setup times and high cost-effectiveness ### Applications The machine is ideally suited for the production of: * Folding cartons * Food packaging * Cosmetic packaging * Pharmaceutical packaging * Shipping packaging * Displays * Packaging made of cardboard and corrugated board * Labels and special packaging ### Technical Data * Maximum paper format: 780 × 1,080 mm * Minimum paper format: 360 × 400 mm * Maximum die-cutting format: 770 × 1,075 mm * Internal dimensions of the die: 790 × 1,100 mm * Die plate format: 780 × 1,080 mm * Minimum gripper margin: 8 mm * Die-cutting accuracy: ±0.1 mm * Maximum die-cutting force: 350 t * Production speed: up to 6,500 sheets/hour * Feeder stack height: 1,550 mm * Delivery stack height: 1,400 mm * Material thickness, cardboard: 0.1 – 2.0 mm * Corrugated board: up to 4 mm * Main motor: 11 kW * Total power: 17.8 kW * Machine weight: approx. 17,600 kg * Machine dimensions (L × W × H): 5,880 × 2,100 × 2,350 mm (plus pre-feeder and operator platform) ### Standard Equipment * Automatic high-stack feeder * Precise die-cutting system * Integrated stripping station Laedpfozg E Siox Ab Neh * Automatic delivery system * Robust die plate * User-friendly machine control * High-quality safety and monitoring systems ### Included in the Scope of Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ Machine commissioning on site ✅ Free instruction and training for your operating personnel ✅ Comprehensive after-sales service and technical support, even after installation ### Delivery Time Approx. 6–8 weeks after order receipt ### Machine Type Fully automatic die-cutting machine with integrated stripping station KMK AEM-1080Q

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2MOBG00099, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, This lot consists of five JUKI MO-6900 series industrial overlock / safety-stitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI MO-6900 series is JUKI's high-end overlock platform, valued worldwide for high sewing speeds, excellent seam quality and long service life in continuous industrial operation. The lot includes both 1-needle overlock (MO-6904) and 2-needle safety-stitch (MO-6916) configurations. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched set with common operating principles, shared spare parts inventory and simplified maintenance. These machines are ideally suited for denim manufacturing, jeans assembly, workwear, knitwear and other applications requiring fast, durable overedging and safety-stitch seams. Bundle Contents Machine 1 Model: JUKI MO-6916R Internal Reference: 62B-V109 Machine 2 Model: JUKI MO-6916R Class: FF6-50H Internal Reference: 9-NoNr Machine 3 Model: JUKI MO-6904S Class: OF6-300 Internal Reference: 89B-7190 Manufacturing Number: 2M0BG00099 Machine 4 Model: JUKI MO-6916 (MO-6900 Series) Year: 2009 Internal Reference: 123A-H79 Machine 5 Model: JUKI MO-6916-12 Year: 2009 Internal Reference: 132A-K536 Technical Specifications Manufacturer: JUKI Corporation Model Series: MO-6916R (2 machines) / MO-6904S / MO-6916 / MO-6916-12 Machine Type: Industrial Overlock / Safety Stitch Sewing Machine Country of Manufacture: Japan 1-Needle Overlock and 2-Needle Safety Stitch Configurations Maximum Sewing Speed: Up to 7,000 stitches per minute (model-dependent) Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched MO-6900 series production set • High-speed overedging and safety-stitch seaming • Excellent seam quality on denim and heavy fabrics • Reliable performance during continuous production • Common spare parts across the production cell • Proven Japanese engineering and long-term durability Why Purchase This Lot • Five professional JUKI MO-6900 series machines • Matching machines from one factory • Complete safety-stitch capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion • Excellent investment for denim and workwear manufacturers Applications • Jeans production • Denim manufacturing • Inseam and side-seam safety stitching • Seam serging and overedging • Workwear manufacturing • Uniform production • Knitwear and jersey garments • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Ljdpfxoznz Shs Ab Noah Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Lasdozmv Dvjpfx Ab Nsh Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.