Used Small Punching Press for sale (16,893)

Condition: used, Single column eccentric press MÜLLER GEFREES type PDET 5 S/EK Machine No. Year of construction 1988 pressure force 5 ton. throat 125 mm head clearance 170 mm table area 280 x 220 mm waste hole Ø 90mm ram surface 160 x 100 mm stroke adjustment 4 to 40 mm ram adjustment 30 mm Installation height largest stroke top max. 210 mm Ihjdpsik Srwofx Addjt Stroke rate 200 strokes/min. Clamping spigot bore Ø 25 mm Table height above floor 900 mm motor power 0,55 kW mains connection 380 volt, 50 Hz - pneumatic clutch-brake combination - electric foot switch - switch cabinet at the machine space requirement L x W x H 900 x 600 x 1700 mm weight 530 kg very good condition

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel Iodpfxedzqlve Addeht - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Isdpfx Ash U Dtuoddoht Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min Ijdpevu E I Djfx Addeht total power requirement 20 kW

Condition: used, Year of construction: 1980, pressure 25 t Ihjdpsvu E Iqefx Addet no. of strokes 1500 Hub/min total power requirement 20 kW

Condition: used, ROVETTA Transfer Press Type: S4-15000-5500x2500 Ihjdpfx Ajxnxlfjddst Press force: 1,500 t Strokes: 8–24 spm Stroke length: 763 mm Slide adjustment: 400 mm Shut height: 1,200 mm Table area: 5,500 x 2,500 mm Slide area: 5,500 x 2,500 mm Opening between uprights, lateral: 3,400 x 1,900 mm

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Iedjwkd Efjpfx Addjht Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: used, Year of construction: 2004, pressure 80 t throat 515 mm connected load 11,0 kW stroke 70 mm 640 x 550 mm no. of strokes 38 Hub/min hole diameter in sheet thickness mm weight of the machine ca. 1,95 t Ijdpfx Ajvki Dueddoht dimensions of the machine ca. 1,6 x 1,55 x 1,9 m ith a wide range of accessories See pictures

Year of construction: 2004, condition: ready for operation (used), An NDC hydraulic punch is available. Weight: approx. 1750kg. An on-site inspection is possible. Iedpfexfbcnox Addoht

Condition: used, throat 750 mm punch diameter max. 75 mm max. sheet metal thickness 4 mm weight of the machine ca. 250 kg dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m Isdpjtqqp Sefx Addoht max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm

Condition: used, Year of construction: 1984, Punch power 400 kN table surface area ca. 1250 x 700 mm Iodpfjvb I Imsx Addjht throat 500 mm hole punching press: capacity (dia. x thick.) 100 x 3 mm hole punching press: capacity (dia. x thick.) 75 x 4 mm hole punching press: capacity (dia. x thick.) 30 x 10 mm x-travel 700 mm y-travel 470 mm total power requirement 4 kVA weight of the machine ca. 2 t dimensions of machine L x W x H 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies

Condition: used, Year of construction: 1985, Punch power 400 kN throat 500 mm Ihsdsv Achkjpfx Addet hole punching press: capacity (dia. x thick.) 100 x 3 mm hole punching press: capacity (dia. x thick.) 75 x 4 mm hole punching press: capacity (dia. x thick.) 30 x 10 mm x-travel re. 1280 / li. 650 mm y-travel 465 mm total power requirement 4 kVA weight of the machine ca. 2,2 t dimensions of machine L x W x H 2,54 x 1,65 x 1,90 m - with DRO on Y-axis Accessories: with various punches and dies

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min Ihodpfon Nxw Dsx Addjt MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Iodpfow Suwysx Addsht Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Isdpjw U T Uvofx Addjht

Condition: used, functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, table length: 2,000 mm, table width: 1,000 mm, input voltage: 410 V, overall weight: 7,500 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, Amada Aries 245 in good working condition, supplied with tools (9 tools with various clearances for different sheet thicknesses). Iedpfx Ajxyzu Hjddoht

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Ihsdjvu E Iwepfx Addjt total power requirement 5,5 kW

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. Ihjdpfx Adjt Hwz Njdjt * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Ihsdpfx Adot Amdredet

Condition: ready for operation (used), Schüco Tool Pressing Tool Punching Tool, Ihjdpfx Asd Sc D Soddot Item No.293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5pc. Without number

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 13,549 h, laser power: 3,200 W, punching force: 22 t, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting Ihjdpfxsvzrb Ds Addst - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: used, Year of construction: 2001, Combined punching machine with shear and automatic loading/unloading system – FINN-POWER SG + TRS6FB _____ Brand: FINN-POWER Isdpfew Iflmsx Addsht Model: SG + TRS6FB Year of manufacture: 2001 Machine weight: 22,000 kg Punching force: 300 kN Shearing force: 250 kN Max. working pressure: 300 bar Description: CNC combination punching machine + corner shear, complete with: • automatic loading system with sheet metal storage • CNC rotary turret • integrated corner shear • conveyor belts for unloading • soundproof cabin and safety guards • dedicated Finn-Power CNC The machine is currently installed and can be inspected by appointment. Condition: • Immediately available 📍 Location: Italy _____

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics Iedpfxev Am Two Addsht - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes Ihodpfsw E Emaox Addjt If you have further questions, we will be happy to answer them.

Condition: used, Year of construction: 1992, machine/vehicle number: 9802, pressure:80 t no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm Ihsdsh Ra N Rjpfx Addjt ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar :43 kw weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m