Punching press

Mubea HP 1000/760

Condition: good (used), functionality: fully functional, Weight: 3.5 tons Pgedjztknpspfx Ahpor Punching force: 1000 kN Reach: 760 mm Can punch, for example, a 40 mm hole in 22 mm steel Drive power: 8.5 kW Height (approx.): 2.15 m Width x Depth (approx.): 0.8 x 2 m Stroke release via foot switch.

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. Pedpfxju Icmhj Ahpogr *

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW Pgsdpszn Ahkjfx Ahper weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm throat 760 mm total power requirement 8,5 kW weight 3.600 kg Pgsdsyv Nrzepfx Ahpsr Accessories / equipment: - punching table

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t Psdpfx Aefn Aqnjhpsgr dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Pgjdpev Ip Sgefx Ahpor

Condition: excellent (used), pressure 125 t throat 400 mm Pjdot Eix Ropfx Ahpegr stroke 6 - 125 mm ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled Pgjdpotqm Dmjfx Ahpjr - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm Pjdpfx Ahelp U Ddspogr ram surface 560x355 mm hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm Podpfx Ahelp U D Ejpsgr tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm