Used Spindle Hours for sale (23,236)

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: Lodsyhc Swspfx Abvehd - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. Lhedpfx Ajyhc Sdebvsd - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt Lodpfx Abeyhc H Ujvehd - Flavour drum - Gas powered oil heater and oil pump. More information to follow.

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Ljdpfxetttige Abvohd Sale individually or in a package possible .

Condition: ready for operation (used), Grinding wheel Ø: approx. 175/190 mm Grinding wheel width: 30 mm Grinding wheel speed: 2800 rpm Lsdefnbgyepfx Abvohd electr. Connection: 380 V, 0.6 kW Space requirement: 670 x 400 x 1140 mm Weight: approx. 120 kg

Condition: good (used), for spindle taper: MK 3 Drilling Ø: 10 mm Thread cutting: M 5 / M 8 min./max. Spindle distance: 35/120 mm Case diameter: 170 mm Case length: 218 mm weight: Ledpfx Aod R Atcobvehd

Condition: ready for operation (used), Pitch: 10 mm Ljdpfx Abjd Atq Rsvohd Thread length: 1460 mm thread Ø: 30 mm Spindle nut mounting: 60 mm Ø

Condition: ready for operation (used), Pitch: 20 mm Thread length: 2330 mm Ljdpfsd Atq Eox Abvehd Thread Ø: 38 mm Nut length: 130 mm

Condition: ready for operation (used), Pitch: 10 mm Thread length: 1165 mm Lhjdpsd Atq Tefx Abvjd thread Ø: 30 mm spindle nut mounting: 28 x 49 mm Ø Total length of spindle: 2170 mm

Condition: used, Year of construction: 1971, height of centers: 265 mm center distance: 1500 mm max. circulation-Ø over bed: über Bett 540 mm Ljdpeurirdefx Abvshd spindle boring: 65 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 9 - 1800 rpm forwarding feed: längs/plan 0,063-2,24/0,032-1,12 mm/U thread pitch: 0,35 - 560 mm electrical connection: 380 V, 11 kW space needed: 4580 x 1250 x 1330 mm weight: 3200 kg

Condition: good (used), Center height: 205 mm Center distance: 1500 mm Swing diameter: over bed 410 mm Spindle bore: 47 mm Spindle mount: size 6 Tailstock taper: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/transverse 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Ledpfx Asv Du Ixebvohd Space required: 2800 x 1100 x 1600 mm Weight: 1330 kg

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module Lhsdsxpuu Espfx Abved 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Tailstock taper: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Lhsdpfx Abjvzn E Sovod Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Condition: good (used), Centre height: 195 mm Distance between centres: 1250 mm Max. swing diameter over bed/cross slide: 400/265 mm Spindle mount/bore: Camlock D1-6"/54 mm Tailstock quill taper: MT 5 Spindle speeds steplessly adjustable in 3 ranges: 0 - 2500 rpm Longitudinal feeds: 0.018 - 1.2 mm/rev Lhodpfx Ajxlg Dwobved Cross feeds: 1/2 of longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 imperial (inch) threads: 2 - 56 TPI 20 module threads: 0.2 - 3.5 module 20 diametral pitch threads: 8 - 56 DP Electrical connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Condition: used, height of centers: 250 mm center distance: 1500 mm max. circulation-Ø over bed: über Bett 500 mm spindle boring: 56 mm Lhedpfeuritbjx Abvjd spindle retainer: Gr. 8 retainer taper tailstock: 6 MK spindle speed: 11,2 - 1400 rpm forwarding feed: längs/plan 0,027-3,8/0,013-1,9 mm/U thread pitch: 0,5 - 36 mm electrical connection: 380 V, 2 x 5,5 kW space needed: 3600 x 1250 x 1300/1600 mm weight: 3000 kg

Year of construction: 1980, condition: good (used), pression: 140 t spindle diameter: 140 mm table supporting surface: 650 x 650 mm tappet area: 545 x 400 mm max. distance between table and tappet: 700 mm Ledpohi D I Sofx Abvehd engine: 380 V, 11 kW weight: 3300 kg

Condition: good (used), axle configuration: 3 axles, first registration: 06/2012, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65, wheelbase: 8,750 mm, color: white, Year of construction: 2012, Refrigeration unit brand: Carrier = Further information = Axle configuration Tyre size: 385/65 Suspension: air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 45% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 65%; Tyre tread right: 65% Weights Unladen weight: 8,750 kg Payload: 30,250 kg gross vehicle weight: 39,000 kg Functional Reefer engine: Diesel and electric (8,850 operating hours diesel) Condition Technical condition: good Lhedpfx Abswitn Hevsd Visual condition: good Additional information Please contact Maarten Busser or Niels Busser for more information.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,971 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: electric, mast type: other, construction height: 2,780 mm, battery capacity: 930 Ah, remaining battery capacity: 88 %, battery voltage: 80 V, DGUV certified until: 03/2027, fork length: 1,800 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Lifting capacity: 4,000 kg Lift height: 4,100 mm Overall height: 2,780 mm Year of manufacture: 2019 Operating hours: 1,971 STILL 4.0 ton electric forklift with full cabin and heating, very low hours, very good battery, good tires (rear tires new), telescopic full free lift mast, fork positioner with side shift by Meyer, mini-levers, two-pedal control, Blue Spot front and rear, lighting, fork length 1,800 mm, charger included. The following options/upgrades are available upon request (price on request): - Single-pedal instead of two-pedal control - Different fork lengths - Lighting per StVZO (German Road Traffic Licensing Regulations) Ex-works price, including 1,000-hour service according to STILL manufacturer's guidelines and valid FEM (UVV) safety inspection at time of sale. Inspection, demonstration, and test drive available by appointment. Sale to commercial customers only. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift economically with our own low-loader with ramps (transport costs on request). For more information and offers, please visit our newly designed website. Lsdpfx Aeyhu Uwsbvohd

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,882 h, load capacity: 3,500 kg, lifting height: 6,050 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, battery capacity: 775 Ah, remaining battery capacity: 94 %, battery voltage: 80 V, DGUV certified until: 03/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-35 Electric Forklift with the following specifications: Operating hours: 2,882 Lifting capacity: 3,500 kg Lift height: 6,050 mm Overall height: 2,750 mm Year of manufacture: 2019 STILL 3.5-ton electric forklift with full cabin and heating, low hours, as-new battery, very good front tires, new rear tires, triplex mast with full free lift, fork positioner with side shifter, single-pedal control, 4+ joystick, road-legal lighting (StVZO compliant), fork length 1,200 mm, new charger. The following options/upgrades are available on request (price on application): - Two-pedal operation instead of single-pedal - Different fork length Ex works price, including major service as per STILL manufacturer’s specifications and valid UVV safety inspection. Viewing, demonstration, and test drive are available by prior telephone appointment. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own low-loader ramp trailer (transport costs on request). Ljdpex Rxyqofx Abvjhd For more information and offers, please visit our website!

Condition: used, For sale: Vaccari Press 330T. The machine is currently not in operation. Ideal for refurbishment or spare parts. For more information or if interested, feel free to send a message. Lhedeyvia Sopfx Abvod

Condition: used, Year of construction: 2016, operating hours: 27 h, total length: 3,900 mm, total width: 1,600 mm, total height: 2,300 mm, Weight: 6.650 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 27 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 7.5 - Number of axes [pcs]: 4: Y1+Y2+X+R Lhjdpoyrn Edsfx Abved - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2600 - Throat depth [mm]: 300 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 140 - Crowning system: CNC-controlled - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3900mm x 1600mm x 2300mm (l x w x h) - Transport weight [kg]: 6650kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1982, Center height: 400 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Ledpfx Aevzn Itjbvehd Spindle mount: Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Lhjdpfx Ajvi I Nmjbvod Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Lhsdpfxeyu R Nko Abvod Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Ljdpfsyu R H Nex Abvjhd Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg