Used Spline Shaft for sale (6,363)

Condition: new, Spare parts for Doppstadt Rotaro for sale: - various sieve baskets - 2 pcs of afterpress units - flywheels Rcsdpfx Aox E T Dyjh Uek - control cabinets with Schneider control - control cabinets with frequency inverter

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Condition: Single-shaft shredder is equipped with a good set of blades. -Manufacturer: Vecoplan, Side-mounted mill cutting mill Redpfxjxlcqte Ah Usck -Type: VAZ120/105 -Processing capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter blades: 1 piece -Inlet cross-section: 1240 x 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Rcedpfx Asxrtt Eoh Usk Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Rodpfxox Nkhqe Ah Uock Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Rcjdpfx Ajx H Aa Teh Uok Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer.

Condition: excellent (used), Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base Rodpfx Ahjwfh Imo Ujck

Condition: excellent (used), Habegger ( Burri / Petermann) Can & Spline Slotting Machine Redpfx Ajwwmr Ijh Ujck Swiss made

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft Rsdegxnkkopfx Ah Ueck -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: used, GENERAL Impeller diameter: 200 mm Agitator: Propeller Other: Total length approx. 1,060 mm Location: Bremen Shaft diameter: 35 mm Shaft length: 910 mm Rcodjx Dlnrjpfx Ah Ujk Product-contact material: V4A 1.4401/04 (AISI316) Condition: used

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - 450 kW DC power – with ABB frequency inverter including DTC control - Bevel helical gear unit – roller speed up to approx. 32 rpm / variable via belt drive and inverter control - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Infinitely variable speed control - Tooth type: form C3 trapezoidal tooth, 174 mm - Wear-resistant armor plates on the roller - Hydraulically adjustable counter comb – cutting gap adjustment via display - 4 comb cylinders - Central lubrication system - Hydraulically opening comb hatch - Pre-assembled main control cabinet - Local operator panel at the machine - Start-up warning system - Engine compartment lighting - Paint finish: RAL 2011 deep orange The machine is equipped with the following additional features: - Mounting strip for limiter Rsdpfex I A Akox Ah Ueck - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine frame height: 1,200 mm - 3-sided hopper extension, left or right - Flashing light module - Solenoid valve for water spraying device - Radio remote control (EU) - Profibus integration - 2 additional power outputs on the control cabinet, up to 7.5 kW each - Control cabinet container / air-conditioned, LxWxH 5,000x2,400x2,600 mm The machine can receive comprehensive reconditioning at our factory upon request. - OPTIONAL ONLY: Discharge conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Miscellaneous: - Display in German; English available - Stickers and operator panel labeling in German; English available - Warning stickers in German; English available - Operating manual in German (print and digital) (can be translated for local requirements)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm Redpfx Ahjx Rc Tbj Ujck - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, subframe/base divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Rcjdpev Hr Nxsfx Ah Uek

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Redpfx Ahex Hnz No Ujck Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, all stainless steel Rcjdpfexxva Ujx Ah Ujk 2 front discharge guards 2 mixing directions safety lid overall dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: GSE 30602103001, ZERMA shredder Type: GSE 300/600 + DUST CYCLONE Includes spare parts, knives, counter-knives. Like new, only used for a few hours Rcsdpfjvdkw Njx Ah Uek

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Shredder located in Carlisle. Rcedexp Nm Nepfx Ah Uek

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER: 6591 TECHNICAL DATA - Maximum cutting height: 250 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Minimum blade diameter: 300 mm - Maximum blade diameter: 400 mm - Maximum infeed material width: 860 mm - Minimum workpiece length: 1,500 mm * From above: - Kickback devices - 2 pneumatically pressed, metal, toothed feed rollers - Kickback devices - Pneumatically pressed, metal, toothed feed roller - Pressure unit - Saw shaft - Pressure unit - 2 pneumatically pressed, metal, toothed feed rollers * From below: - Metal idler roller - Guide - Kickback devices - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter: 4–40 m/min - Main motors: 2 × 75 kW - Feed motor: approx. 3 kW - Electric body lift (up/down): 0.55 kW - Electric adjustment of saw shafts: 2 × 0.18 kW - Centralized lubrication - Extraction connector diameter: 2 × 300 mm - Dimensions (L × W × H): 3,400 × 2,650 × 2,200 mm - Weight: approx. 7,500 kg Rcodpfxjx Rc Nvo Ah Uek ADVANTAGES – Czech manufacture – Double-shaft – DTR technical documentation – Used multi-blade saw, very good condition Net price: 275,900 PLN Net price: 65,690 EUR Net price based on exchange rate 4.2 PLN/EUR (price subject to change in case of significant exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, drive power: 250 kW, control cabinet with star-delta starter. Rotor length: 1200 mm, rotor diameter: 800 mm, number of knives/rotor: 36 pcs, number of knives/stator: 4 x 6 pcs. 2 hydraulically swiveling stators with 2 rows of counter-knives each. Hydraulic pusher, bearing temperature monitoring, central lubrication for rotor bearings. Net weight: 29,800 kg. Year of manufacture: 2005, overhauled in 2025, all wear parts have been replaced. Rsdoxiw Hwjpfx Ah Ujck

Condition: used, New, unused, sharpened and used end mills and drills for CNC machines as shown. Rsdpfx Ahevy Apie Ueck length: Miscellaneous diameter: Miscellaneous Shank: Miscellaneous mass: 12 kg Application: woodwork

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: MBUT1-9, Cable shredder Pre-shredder Chip crusher Shredder Two-shaft shredder Rotor shear Rotor knife Chip shredder 5 pieces available! Rcodjikm Nrjpfx Ah Ujk Manufacturer TBE Habermehl TYPE ZH400, BJ 2003 Power 400V 3KW with pumping station, without control The shredder can also be operated separately from the chip conveyor Dimensions complete LxWxH 200x85x120cm (motor), 110x55x31cm LxWxH (shredder), Opening about 45x40cm Ideal for pre-shredding cables with plugs, plastic, metal, wood etc. Warning - not a toy. The shredder eats almost everything. Very robust engine and transmission Used condition, function flawlessly until dismantling Collection only by appointment in 75053 Gondelsheim Shipping by forwarding agency possible, please inquire with zip code

Condition: used, overall weight: 1,500 kg, rotor diameter: 252 mm, total length: 1,800 mm, total height: 2,000 mm, total width: 1,200 mm, rotor width: 600 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 90 rpm, filling opening width: 600 mm, filling opening length: 800 mm, No. 3255 Single-shaft shredder WEIMA WL 4 Used Quiet-running and slow-running V-rotor system Motor power main drive 18.5 kW Rotor diameter 252 mm Rotor width approx. 600 mm Rotor speed approx. 90 rpm Hopper volume 0.6 m3 Inlet cross-section 800 x 600 mm LW Reversible blades, concave ground Automatic operation / manual operation Sieve perforation 15 mm Suction nozzle 160 mm Rjdpfsx Hhk Rsx Ah Ujck Transport dimensions approx. 1800 x 1200 x 2000 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2004, WE HAVE 24 OF THESE SHREDDERS CAN DO A PACKAGE PRICE FOR MULTIPLE PURCHASES Type: EH 400/1 Serial number: 901 Rcsdpfx Ahoxapr Hs Uok Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes 🛠️ Description of the device Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: good (used), comac Series 3000, Model 303 Heavy-Duty Profile Bending Machine | 3 Driven Rolls The Series 3000 – Model 303 is a powerful and precise profile bending machine designed for demanding industrial bending applications. With its robust construction, three driven rolls, and modular roll system, this machine is suitable for a wide range of profiles, pipes, and tubes. Equipped with a solid 3 kW motor, individually adjustable bending rolls, a free-standing remote control, and both vertical and horizontal operating modes, the 303 offers maximum flexibility and ease of use. The machine complies with the 2006/42/EC Machinery Directive and is built for long-lasting, trouble-free performance. Key features - Compliant with 2006/42/EC safety standards - 3 driven rolls for maximum grip and perfect material feed - Independently adjustable bending rolls for double pre-bending of symmetrical profiles - Lateral guide rolls with three-dimensional adjustment - Modular rolls suitable for most standard profiles - Alloy steel bending rolls, heat treated to 60 HRC - Free-standing safety remote control - Suitable for vertical and horizontal installation - One-piece steel frame for extreme stability - Torque limiter on the upper shaft - Shafts and gears mounted on rolling bearings for high dynamic loads - Spline-driven power transmission for optimal force transfer Technical Specifications - Shaft diameter: 50 mm (upper/lower) - Roll diameter: 180 mm - Motor power: 3 kW - Feed speed: 5.5 m/min - Weight: 720 kg Bending Capacities Profile Up to Minimum bending radius 60 × 10 mm – Ø 450 mm 25 × 5 mm – Ø 200 mm 80 × 20 mm – Ø 400 mm 32 × 32 mm – Ø 400 mm Ø 40 – Ø 400 mm Ø 60.3 × 2.9 – Ø 800 mm Rjdsx A Ivijpfx Ah Uock Ø 20 × 1.5 – Ø 220 mm Ø 48.3 × 4 – Ø 500 mm 60 × 30 × 2.5 – – 50 × 3 – – 60 × 6 – Ø 600 mm 30 × 4 – Ø 350 mm 50 × 5 – Ø 500 mm 30 × 4 – Ø 350 mm 60 × 60 × 7 – Ø 600 mm 50 × 50 × 6 – Ø 600 mm 70 × 70 × 8 – Ø 700 mm 80 × 45 – Ø 500 mm 70 × 40 – Ø 600 mm 80 × 42 – Ø 500 mm

Condition: used, Year of construction: 2017, Weima HWN-2-1000 chipper for shredding wood and similar materials such as plastics or cardboard. The machine features a robust design, a large feed hopper, and two powerful rotors for continuous material feeding. Optional new blades available at an additional cost. rotor diameter: approx. 354 mm rotor length: 1.000 mm Number of knives: 2 x 72 drive power: 2 x 18.5 kW Rcedpoxvzzxefx Ah Ujk Dimensions: 2.4 x 2 x 2 m sieve size: 10 mm

Condition: used, Overall length: 266 mm overall length: 266 mm D: 35 mm Available: 1 * Total length: 266mm, *D=35mm, Redpfxjlkciws Ah Ujck * Available: 1st