Used Spraying Machine for sale (65,994)

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Lrsdpoya H Nkofx Ah Seu Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L102 Automatically operating hot water parts washing machine with basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters Lrjdedz Dy Hopfx Ah Sju - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Unladen weight: approx. 300 kg Wash time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and outer casing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking system Bath cover with fine filter (2,000 microns) 2 suction filters as pump protection Operating hour counter Steam extraction with condensate return Parts washing machine is in new condition (test system / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! This offer is non-binding and subject to change. Changes, errors and prior sale expressly reserved.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM Lrjdpfx Ajzb Ipzeh Sou 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Year of construction: 2025, operating hours: 50 h, condition: as good as new (ex-display), Spray-flood cleaning system – parts cleaning system for the highest requirements or precision and fine cleaning. Basket useful dimensions, loading basket: L x W x H 600 x 400 x 300 mm Maximum loading weight: 150 kg; loading trolley in front of the system included. 3-tank design: Cleaning (600 liters) Ledpog Itg Esfx Ah Ssru Rinse 1 (600 liters) Rinse 2 (600 liters) System electrically heated - Cleaning processes: Spraying, injection flooding, ultrasonic - Ultrasonic (rod transducer): 3,000 watts effective / 6,000 watts peak - 30 kHz - Basket remains stationary, oscillates, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Hot air and vacuum drying (vacuum pump, manufacturer Leybold, 300 m3/h) - Full filtration of all tanks (3), each with a Topline bag filter (manufacturer Eaton), filter fineness freely selectable - Automatic water replenishment per tank - Preparation for coalescing oil separator - Preparation for the installation of a closed-loop system for the treatment of rinse water Control: Siemens S7-1200 with 16 programs Year of manufacture: 12/2025

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Lrjdpfezvaz Dsx Ah Sju Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator Lsdpfx Ahshgh I Sj Sjru The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: used, Year of construction: 2023, The machine is ready for demonstration at the warehouse in Blomberg. The machine is ready for painting and is already equipped with 1 Bings Marple 8/25 high-pressure pump (up to 175 bar) and 4 Sames-Kremlin AVX Airmix spray guns. Machine equipped with a changeover valve for quick paint changes lever switchable to up to 3 paint circuits and 1 flushing agent pump (options) The machine is in an Ex-rated version. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width 1,200 mm (1,300 mm) - Single-gun drive - Dry extraction - Belt conveyor system - Feed speed continuously adjustable 2–8 m/min - With paint recovery - Gun control PLC, LS - Number of installed paint circuits: 3 - Number of spray guns installed: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system Lrsdpfxszf N Thj Ah Ssu - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25 up to max. 175 bar - Includes supply air filter hood - Suitable for water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Volts, Hz 400 / 50 - Color RAL 7035, light gray - Weight 3,100 kg _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Lredpfx Ajyzf Naoh Seu Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, automatically operated cleaning system that meets high standards regarding cleaning, degreasing, and drying results. Lodpfxogrm Dfs Ah Seru The parts can be cleaned with the goods basket in a stationary, pivoting/oscillating, or rotating position. The nozzle system – several nozzle bars on the long sides and end faces – is permanently mounted in the processing chamber. Basket dimensions: L x W x H 470 x 320 x 200 (h) mm 2 baskets can be washed in parallel (simultaneously) Maximum load weight: 100 kg Spray pressure (washing): 4 bar, circulation rate: 360 liters/min. Control system: Siemens S7-1200 with KTP700 touch panel Includes hot air drying (12 kW) Includes compressed air impulse blow-off Includes steam extraction Includes external cladding made of stainless steel Includes preparation for retrofitting an oil separator Includes bag filter for media maintenance Includes 2 stainless steel goods baskets 470 x 320 x 200h mm System dimensions: L x W x H 1,425 x 1,920 x 1,980 (h) mm Dimensions including the open loading door Connection value (electrical): approx. 25 kW

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Lredjzav D Dspfx Ah Seu Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards Ledpjxz Dqgjfx Ah Ssru

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Lodpfx Aszuxn Teh Seru Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Lrsdpfx Aez Tf D Reh Ssu Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Lsdoyaywhjpfx Ah Sjru Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 Carnitech CT 2612 single-lane pin-bone removing and packing line for salmon and trout fillets. The pin-boner dates from 2000 and the packing line from 2023/24. Ledpoy Swi Hsfx Ah Sjru Technical specification: ✅ Manufacturer - Carnitech A/S ✅ Model - CT 2612 ✅ Lanes - 1 ✅ Pin-boner year of manufacture - 2000 ✅ Packing line year of manufacture - 2023/24 ✅ Capacity - up to 36 fillets per minute ✅ Fillet size - 0.5 kg to 4 kg ✅ Fillets are conveyed head end first, skin side down, on a PVC belt Condition: According to the seller, the line is in full working order, and the pin-boner has been refurbished, including new electrics. Video available.

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Ljdpszu Ni Uefx Ah Soru Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12 Lredpfsz S T Ubox Ah Sju

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, Lredpsq R Tnzsfx Ah Seu swarf auger.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070139, working width: 1,300 mm, suction capacity: 12,000 m³/h, overall weight: 5,000 kg, workpiece height (max.): 80 mm, Submitting a bid obligates you to collect the item by the deadline of June 22, 2026! TECHNICAL DETAILS Working width, max.: 1,300 mm Workpiece length, min.: 300 mm Workpiece thickness, max.: 80 mm MACHINE DETAILS Lrjdpjy Tvc Uefx Ah Sju Traversing system: CNC-controlled with oscillating arms Air supply, spray booth: 12,000 m³/h Extraction: 12,000 m³/h Fan power: 7.5 kW Spray guns: 4 pieces Power, main motor: 15 kW Voltage: 400 V Current consumption: 32 A Total power: 15.6 kW Working pressure, max.: 120 bar Dimensions & Weight Dimensions in assembled condition: 7,000 x 4,300 x 3,200 mm Dimensions (L x W x H): 11,000 x 2,400 x 2,400 mm Weight: 5,000 kg Transport packages: 4 pieces EQUIPMENT CE marking Spray gun Pump type: Wagner Number of spray booths: 1

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Model - Swift.  Date of manufacture - 2011.  Lrjdpfx Aoy Unmujh Sou Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 2019 automatic inline monoblock filling and capping machine for 5 litre bottles, with 8 filling heads. Supplied with infeed and outfeed conveyors. Listed as Canellitech Srl 8-1. The manual identifies the manufacturer as Rizzolio Equipments S.r.l., model RLV 8-1. Technical specification: ✅ Manufacturer - Rizzolio Equipments S.r.l. (listed as Canellitech Srl) ✅ Model - RLV 8-1 (8 filling heads) ✅ Year of manufacture - 2019 ✅ Set up for - 5 litre rectangular PET bottles with push caps ✅ Capping - push capping head ✅ Speed - up to 500 bottles per hour nominal. The manual states actual output depends on the operator. ✅ Electrical - 380V / 50Hz / 3 phase + neutral, 24V controls, electro-pneumatic ✅ Power - 1.0 kW max absorption, 2 kW installed ✅ Weight - 400 kg ✅ Dimensions - 2.7m L x 1.1m W x 2.45m H Condition: , lightly used. Ljdpfx Aeulpu Sjh Sjru Documents: EU Declaration of Conformity (Machinery Directive 2006/42/EC) included in the manual.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Lsdpfjzxgglex Ah Ssru Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Lrodezrg T Eopfx Ah Sou Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Lrodpsulpmzsfx Ah Ssu Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: used, New 2013 Table size 1474 x 356 mm Lredpsyhdi Rofx Ah Sou X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg