Used Spraying Machine for sale (65,518)

Condition: used, Year of construction: 1997, turning speeds 3.000 U/min grinding wheel diameter 150 mm table-size 380 x 220 mm T-slots 1x 0 3~220 / 380 V total power requirement 0,37 kW weight of the machine ca. ca. 150 kg dimensions of the machine ca. 0,7 x 0,6 x 1,25 m Bjdpfxo Ahkgwe Adholp Turning Tool Grinding Machine GREIF - DHL K-0

Condition: used, Year of construction: 2016, weight of the machine ca. 5200 kg Bljdpfx Ado Ahklmohep

Condition: used, axle configuration: 3 axles, first registration: 09/2016, total length: 13,680 mm, total width: 2,550 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 9,500 mm, color: blue, Equipment: ABS, Total loading floor length, from front to ramp: 950 cm. Flat loading floor length: 810 cm. Internal height: 309 cm. Length from front: 370 cm. Height from front to roof: 261 cm. Sliding roof / Edscha roof. = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Double tires; tire tread depth left inner: 50%; tire tread depth left outer: 50%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Rear axle 2: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Bledpfozk H Uysx Adhep Rear axle 3: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 70%; tire tread depth right outer: 70% Weights Unladen weight: 9,200 kg Payload: 38,800 kg GVW: 48,000 kg Identification Model number: HYDRAULIC RAMP / FORK LIFT - MAC = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. Bljdpfjz D Efnsx Adhep (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: excellent (used), Year of construction: 2004, operating hours: 40,245 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,600 mm, workpiece weight (max.): 2,000 kg, total height: 3,000 mm, total length: 7,000 mm, total width: 5,500 mm, table length: 1,100 mm, overall weight: 22,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 32 W, Year of construction: 2004 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Maximum workpiece size (D x H) mm: H=1600 Max. workpiece weight kg: 2000 Table rotation speed rpm: 400 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool measuring arm Mist collector Machine running times Under power: 92687 Spindle Working: 40245 Basic machine dimensions / weight Length mm: 7000 Width mm: 5500 Height mm: 3000 Weight kg: 22000 Bodpfx Aj Agpx Tsdholp

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 508 x 406 x 394mm, Table 660 x 381mm, Spindle taper BT30, 11.2kW Spindle Motor giving 15,000rpm, HAAS Control, 20 Station ATC, Blode Agn I Depfx Adhsp Coolant.

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 911 kg traversing speed 80 m/min dimensions of the machine ca. 5600 x 2260 x 1960 mm 1. BodorPower 6 kW laser source 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed with tenon-and-mortise structure Bjdpfx Ads Agpg Ujhelp 5. Bodor servo motor and driver 6. Bodor oxygen control valve and nitrogen control valve 7. Bodor Lightning perforation technology 8. 21.5-inch touchscreen monitor 9. Automatic cutting gas pressure adjustment 10. Active anti-collision function 11. Intelligent vibration protection 12. Burn-resistant mineral cast housing 13. Bodor Mango® ergonomic remote control 14. Gas-saving nozzles with stable flow 15. Smart maintenance reminder 16. Wi-Fi internet connection 17. Smart alarm for anomalies 18. Water cooling 19. Wear parts kit 20. Exhaust system 21. Nitrogen proportional valve 22. Oxygen pressure gauge/nitrogen pressure gauge MAX. SHEET THICKNESS, CARBON STEEL (mm) 20 MAX. SHEET THICKNESS, STAINLESS STEEL (mm) 18 MAX. SHEET THICKNESS, ALUMINUM (mm) 14 RATED POWER (KW) 30.6 MAX. START-UP CURRENT (A) 58.1

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 1,100 kg, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Blodpozp E Sbsfx Adhjp Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: used, Year of construction: 2000, overall weight: 12,000 kg, Used machining center from AXA Type VSC-1-4000-M/E ISO 40 tool holder X / Y / Z = 4000 / 550 / 600 Bsdpfx As Ahnq Sodhslp Heidenhain TNC 430M CNC control 22-position tool changer Tools not included.

Condition: used, Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Machining Center - Universal Manufacturer: MIKRON Type: UCP 600 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 400 mm Bsdpfx Ads Ahrm Sohelp Y-axis: 450 mm Z-axis: 450 mm C-axis: 360° C-axis rotational speed: 30 rpm A-axis: +107° / -10.5° Spindle speed: 20,000 rpm Number of tool stations: 30 Condition: Used Technical features & accessories: - Oil/air lubrication system - Water cooler Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and information; prior sale reserved!

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 Bsdpfxs Ahn Hys Adholp total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: excellent (used), Year of construction: 2000, Sanding belt dimensions: 75 x 2000 mm Contact wheel width/diameter: 75/200 mm Sanding belt speed: 15/30 m/s Drive motor: 380 V, 4 kW Adjustable face grinding table: 75 x 430 mm Space requirement: 1000 x 450 x 1100 mm Weight: 95 kg Blsdpfx Adoznh I Nohsp

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Blodpsy N Du Dofx Adhjp Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 2019 automatic inline monoblock filling and capping machine for 5 litre bottles, with 8 filling heads. Supplied with infeed and outfeed conveyors. Listed as Canellitech Srl 8-1. The manual identifies the manufacturer as Rizzolio Equipments S.r.l., model RLV 8-1. Technical specification: ✅ Manufacturer - Rizzolio Equipments S.r.l. (listed as Canellitech Srl). ✅ Model - RLV 8-1 (8 x filling heads). ✅ Year of manufacture - 2019. ✅ Set up for - 5 litre rectangular PET bottles with push caps. ✅ Fitted with 32mm diameter vent tubes and filling nozzles. ✅ Capping - push capping head. ✅ Speed - up to 500 bottles per hour nominal. The manual states actual output depends on the operator. ✅ Electrical - 380V / 50Hz / 3 phase + neutral, 24V controls, electro-pneumatic. ✅ Power - 1.0 kW max absorption, 2 kW installed. ✅ Weight - 400 kg. Blodpjulpu Sjfx Adhep ✅ Dimensions - 2.7m L x 1.1m W x 2.45m H. Condition: , lightly used. Documents: EU Declaration of Conformity (Machinery Directive 2006/42/EC) included in the manual.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. Bsdpjzlt Ayofx Adhelp The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK Bljdpfswiikdsx Adhjp engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Year of manufacture: 2011 6 tool sets Round 22, radius 44 Round 42, radius 84 Bledpfx Ads Agu D Eshop Round 28, radius 56 Round 18, radius 36 Round 35, radius 70 Round 54, radius 108

Condition: used, Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D Powerline, workpiece height (max.): 1,580 mm, workpiece diameter (max.): 1,000 mm, total height: 3,394 mm, total length: 5,551 mm, total width: 3,375 mm, table width: 800 mm, table length: 1,000 mm, overall weight: 17,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho (DMG) DMC 100U Duoblock from 2008 with the Siemens 840D control. Technical specifications: Table dimensions: 1000 x 800mm Bodpfx Adj Agvh Tohslp Number of pallets: 2 Max. workpiece dimensions: ø1000x1580 mm Max. workpiece weight: 1000kg X-axis travel: 1000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm A-axis (rotation of the head): 130 ° (0,001 °) C-axis (work table rotation): 360° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 28/19 kW Number of positions in tool magazine: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: excellent (used), USED HARTFORD HB2190AG FANUC 21iMB YEAR USED - ORIGINALLY BUILT 2009 MACHINE SN 12842 DOUBLE COLUMN, BRIDGE TYPE VERTICAL MACHINING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS FOR ENHANCED CUTTING PERFORMANCE MACHINE CONSTRUCTION FEATURES & EQUIPMENT  ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION.  HEAVY DUTY HARDENED AND GROUND BOX GUIDEWAYS.  FULL HEIGHT SPLASH GUARDING.  MODIFICATION TO SPLASH GUARD TO ACCOMMODATE 4.1 M LENGTH OF PART.  INTERNAL SPIRAL CHIP CONVEYORS.  LINK TYPE CHIP CONVEYOR AND CHIP BUCKET.  Z-AXIS NITROGEN COUNTER BALANCE SYSTEM.  HARTROL-FANUC 21iMB CNC SYSTEM.  25 BAR THROUGH SPINDLE COOLANT.  COOLANT GUN.  CE MARKED TABLE Working Surface 2,100 X 1,740 MM Tee Slot (Size x Number x Pitch) TBA MM Maximum Table Load 7,000 KGS TRAVEL Longitudinal Travel (X-Axis) 2,000 MM Cross Travel (Y-Axis) 1,970 MM Vertical Travel (Z-Axis) 920 MM Distance from Spindle Nose to Table 160 ~ 1,080 MM Bsdpfx As Afnadsdhelp Distance from Spindle Centre to Column 430 MM Width between Columns 2,200 MM SPINDLE Spindle Nose Taper #50 - DIN69871 Maximum Spindle Speed 6,000 RPM GEARED Spindle Drive GEARED FEED Cutting Feedrate (X, Y & Z Axes) 1 ~ 7,000 MM/MIN Rapid Traverse (X-Axis) 10 M/MIN Rapid Traverse (Y-Axis) 10 M/MIN Rapid Traverse (Z-Axis) 10 M/MIN ATC Tool Storage Capacity ARM TYPE 40 STATIONS Maximum Tool Weight 15.0 KGS Maximum Tool Size Ø 125 X 350 MM Tool Shank DIN 69871 Pull Stud P50T-1 MOTORS Spindle Drive Motor (Fanuc) 26.0 KW POWER SUPPLY Electric Power Consumption 50 KVA Air Pressure 6.5 KG/CM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) TBA MM Height TBA MM Weight 28,000 KGS

Condition: new, Year of construction: 2024, NEW Pillar Drilling Machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop Bljdpfx Adjf S Tfnshop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical protection - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting capacity (dependent on pitch): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Overhang (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack and pinion - Spindle speeds, stepless (1/min): 20 – 2000 - Dimensions (mm): 430 x 715 x 1800 Further TECHNICAL DATA can be found in the product data sheet! OPTIONAL Drilling Package 4 (296593) - € 595.00 - Vise [felix] 2.0 120 - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) - Tapered mandrel B18/MK III - Reducing sleeve MK III/MK II - Reducing sleeve MK III/MK I 3 years warranty for single-shift operation Delivery: free to your door including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2007, Manufacturer: Stephan Model: UM44 Year: 2007 Condition: Used Serial number: 732266 Stock number: 3379 Bowl: 44 liters Capacity: max. 30 liters Knives: 3 speeds, max. 3000 RPM Power: 3 x 400V, 50Hz, 5.5kW Bsdpe Adqrmofx Adhjlp Dimensions: 550 x 800 x 1200 mm Weight: 150 kg With the option to add a vacuum pump.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,000 kg, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, Commissioned in 2013 with RS 3 circular tool magazine (3 pallets) Bedpj Agnwdjfx Adhjlp Control system: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Heidenhain infrared probe Blum laser measuring system 3D Quickset Air cleaner electric handwheel

Condition: good (used), Cable stripping machine, cable stripper, cable peeler, cable stripping machine, cable insulation machine, cable recycling plant -Manufacturer: Yngves MEKANISKA AB, cable stripper cable peeler -Type: K74-1 -Motor: ABB 2.2 kW Blodpfsz Dua Iox Adhsp -Dimensions: 1600/1200/H1600 mm -Weight: 314 kg

Condition: used, total length: 6,500 mm, total width: 3,450 mm, total height: 3,930 mm, Year of manufacture: 2002 Colour: Green Empty weight: 94.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Bledpe Agn Svsfx Adhsp - Year: 2002 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 385 - Drive system: CNC - Control system brand: Swebend - Control system type: 2021 Seven X CNC - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 163.0 - Max. sheet thickness [mm]: 77 - Max. prebending thickness [mm]: 65 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 700 - Bottom roll diameter [mm]: 700 - Options: Cone rolling, Plate support - Transport dimensions: 6500mm x 3450mm x 3930mm (l x w x h) - Transport weight [kg]: 94000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: SACMI / Pack Sud HPS20 Industrial Flowpack Packaging Machine Bjdpfxj Afamio Adhslp We are offering a SACMI / Pack Sud HPS20 horizontal flowpack packaging machine, manufactured in 2021. The machine is designed for automatic packaging of products in flexible film, creating sealed packages with one longitudinal and two transverse seals. Technical Specifications Manufacturer: Pack Sud S.r.l. – SACMI Group, Italy Model: HPS20 Year of manufacture: 2021 Serial number: HPS20-21044C Machine type: Horizontal Flowpack Packaging Machine Maximum capacity: Up to 150 cycles/minute Maximum film speed: 20 metres/minute Electrical supply: 400 V / 50 Hz / 3-phase Installed power: 3 kW Required compressed air pressure: 6 bar Machine dimensions: Approx. 4,100 × 1,278 × 1,622 mm Machine weight: Approx. 850 kg The stated capacity and dimensions are based on the manufacturer's standard HPS20 specifications. Actual performance depends on the product, packaging dimensions, and machine configuration. Applications Suitable for horizontal packaging of products using flexible packaging film, including applications within the food and industrial packaging sectors, subject to product compatibility. Documentation Available Original user and maintenance manuals Electrical schematics Control panel documentation CE Declaration of Conformity Additional Information The machine can be offered as an individual unit. Further technical information and documentation are available upon request. For more information, please contact: SACMI HPS20, SACMI HPS 20, SACMI packaging machine, SACMI flowpack, SACMI flow wrapper, Pack Sud HPS20, Pack Sud HPS 20, PackSud HPS20, Pack Sud packaging machine, Pack Sud flowpack, HPS20-21044C, Italian packaging machinery, used SACMI machine, used Pack Sud machine, 2021 packaging machine. English – Packaging Machines: Flowpack machine, flow pack machine, flow packer, flow wrapping machine, horizontal flow wrapper, horizontal flowpack machine, horizontal packaging machine, automatic packaging machine, industrial packaging machine, wrapping machine, automatic wrapping machine, flexible packaging machine, film packaging machine, horizontal form fill seal machine, horizontal form fill and seal, HFFS machine, HFFS packaging machine, pillow pack machine, pillow packaging machine, three-side seal packaging, longitudinal sealing machine, transverse sealing machine, rotary sealing machine, heat sealing packaging machine, plastic film wrapping machine, roll-fed packaging machine, food packaging machinery, product wrapping machine, individual product packaging machine, used packaging equipment, second-hand packaging machine, pre-owned flow wrapper, packaging machinery for sale.