Used Spraying Machine for sale (66,015)

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Ledpoxtaxwofx Ah Sjhn Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, all stainless steel belt width 400 mm mobile mesh width 5 mm adjustable speed Lhjdpfx Ahoz Sy Hqj Sjn with air knives with batter pump outside dimensions (l x w x h) : ± 1.400 x 800 x 1.300 mm

Condition: good (used), Year of construction: 1985, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 315 mm bore stroke 180 mm turning speeds 130 - 3500 U/min table-size 615 x 470 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 mm/U spindle taper MT 4 MK engine output 2.0 / 2.4 kW weight 450 kg range L-W-H 800 x 650 x 2100 mm Features: Lhjdpfsz S N Drex Ah Sen - Heavy-duty column drill press - With extended column (200 mm) - Drive: "VARIO" V-belt * Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) * with electromagnetic engagement - pole-changing motor - clockwise rotation of the drill spindle - adjustable fixed drill depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Machined base plate - Coolant system in the machine base - Machine light - Emergency stop button on the front - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 55.0 mm throat 335 mm bore stroke 200 mm bore spindles - Morse Taper MK 4 turning speeds 60 - 1.530 U/min table: 740 x 620 mm feed 0.15/0.2/0.3/0.36 mm/U total power requirement 2.6 / 3.1 kW weight of the machine ca. 850 kg range L-W-H 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition (!!) Ljdsz S N Dxepfx Ah Sjhn Features: - Heavy-duty/robust bench-mounted drill press - Drive: "VARIO" V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots * Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâ??s manual

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, operating hours: 15,034 h, machine/vehicle number: 1.500, roller (bottom) diameter: 220 mm, roller (top) diameter: 300 mm, working width: 3,000 mm, sheet thickness (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 8 mm Max. pre-bending thickness: 8 mm Max. working width: 3,000 mm Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 300 mm Diameter of lower rollers: 220 mm Lhodpfxoz Niq Tj Ah Ssn MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 6 kW Operating hours: 15,034 h Dimensions & Weight Dimensions (L x W x H): 7,700 x 2,300 x 1,700 mm Unladen weight: 10,000 kg

Condition: used, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Year of manufacture: 2005 Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Ledpfx Aozkkrvoh Sohn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Used machine Used Hettich Blue Max drilling and countersinking machine Lhjdpfx Ahew I Um Ts Sjn Motor power: 0.8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch Punch die is missing!! Availability: by arrangement Location: Solingen

Condition: used, total length: 2,100 mm, total width: 1,000 mm, total height: 2,450 mm, Colour: White Empty weight: 4.600 kg Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: Yes - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Notching width [mm]: 200 - Shearing width [mm]: 500 - Max. plate thickness shearing [mm]: 2.5 - Options: Length stop - Transport dimensions: 2100mm x 1000mm x 2450mm (l x w x h) - Transport weight [kg]: 4600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lhjdpfj Aatr Uox Ah Son Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), MOSCA KPM 131 Pallet Strapping Machine with Swivel Turntable / Roller Conveyor Description For sale is a used MOSCA KPM 131 pallet strapping machine with an integrated swivel turntable roller conveyor and pallet centering system. The system is designed for the automatic strapping of palletized products and features an integrated swivel turntable roller conveyor with a diameter of approximately 1,800 mm. The swivel turntable allows the pallet to be rotated within the system and positioned according to the desired strapping direction. The machine is suitable for Euro and industrial pallets with pallet runners in the direction of travel. A strapping head is adjustable, allowing for different strapping positions. Machine Data • Manufacturer: MOSCA • Type: KPM 131 • Year of Manufacture: 1996 • Control System: Siemens S5 • Throughput Width: max. 1,200 mm • Throughput Height: max. 1,600 mm • Integrated Swivel Turntable Roller Conveyor: Ø approx. 1,800 mm • Pallet Centering System • Adjustable Strapping Head Strapping Technology • Band Tension: continuously adjustable: 200–2,000 N • Band Speed: 4.6 m/s • Sealing Method: Friction Weld Seal • Band Guide Positions: 440 mm / 625 mm Press • Pressing Force: up to max. 50,000 N • Pressing Force adjustable via potentiometer • Drive via pole-changing geared brake motor • Rapid Traverse Speed: 150 mm/s • Pressing Speed: 37 mm/s Control Panel • Width: approx. 1,200 mm • Depth: approx. 650 mm • Height: approx. 850 mm Condition / Inspection / Integration Before delivery, the machine will be assembled in our workshop in Velbert and completely inspected mechanically and electrically. The strapping head and all relevant machine functions will be tested. Necessary wear parts will be replaced after technical inspection and in accordance with the agreed scope of services. After completion of the work, a functional test of the complete system will be carried out. Upon request, we will also take over the assembly, commissioning and integration of the MOSCA KPM 131 into the customer's existing production or conveyor line. This can include, among other things, the implementation of the necessary electrical interfaces, signal exchange and adaptation to the existing conveyor technology after prior technical coordination. Lhodpfxsypwm Eo Ah Ssn A functional test or pre-acceptance at our plant in 42551 Velbert is possible by appointment. Transport, assembly, commissioning and integration can be offered separately. Subject to prior sale and errors.

Condition: used, Year of construction: 1990, functionality: fully functional, weight 4 t X - Y + Z-axis each 410 mm kN Ljdpfsuu S R Ujx Ah Sohn control Fanuc Axis 4

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,800 kg, table width: 800 mm, table length: 920 mm, overall weight: 14,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 33, Control system: HEIDENHAIN iTNC 530 with smarT.NC Tool interface: HSK-A63 Lhjdpfx Aho Aba Thj Sjn Machining: 3-axis simultaneous Special equipment: - 3D touch probe system - Tool measurement - Electronic handwheel - Roller-type roof guard FREE DELIVERY!

Condition: used, Year of construction: 2018, This system consists of anautomatic spraying machine with part detectionand, in addition, a glass detection system. Roller conveyor is installed in front of and behind the machine. Technical data: Item 1 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width 1,438 mm - Working width 1,300 mm - Working height 940 mm ± 20 mm - Roller diameter 80 mm Ledpfx Ao Aba U Eeh Sjhn - All rollers with hose cover - Roller pitch 150 mm - Motor power 0.75 kW - Feed speed 0.7 – 3 m/min via frequency inverter Item 2 Automatic spray painting machine - Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Control panel on the right - Suitable for solvent-based and water-based paints - Price for reconditioned machine - As-is condition, machine not overhauled - Spray gun drive in Duo configuration - Dry extraction - Extraction nozzle diameter 400 mm - Exhaust air flow rate 7,000 m³/h - Feed speed continuously variable ~ 1.5 – 4 m/min. - Light curtain, part detection type LS 25 and glass detection system - Touchscreen control - Paper belt transport system - 1 paint circuit installed - 1 pump stand - Air atomisation system - Number of paint pumps: 1 - Length: 3,630 mm - Width: 3,575 + 990 mm - Total power consumption: 13 kW - Paint finish: RAL 7035 light grey and 9005 black - Location: not in stock - Voltage fluctuations: max. +/- 5 % Item 3 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width: 1,438 mm - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Roller diameter: 80 mm - All rollers fitted with hose covers - Roller pitch: 150 mm - Motor power: 0.75 kW - Feed speed 0.7 – 3 m/min via frequency converter

Condition: used, Year of construction: 1969, functionality: fully functional, overall weight: 5,500 kg, arm length 1600 mm Lhjdpfxex H Txtj Ah Son taper MK 5 Würfel

Condition: used, total width: 2,700 mm, total height: 2,900 mm, total length: 1,700 mm, Year of manufacture: 2003 Colour: White Empty weight: 3.000 kg Lhedpfx Aezkkd Ssh Sen - Year: 2003 - CE marking present: Yes - Serial number: 0312101 - Drive system: Conventional - Wet/dry: Dry - Number of stations [pcs]: 1 - └ Station type 1: Abrasive belt - Power [kW]: 32 - Max. working width [mm]: 550 - Transport dimensions: 1700mm x 2700mm x 2900mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Lhodpfx Ajzix Nmeh Sjn Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Lhsdpfozfy Ivex Ah Sen Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Keyence Lhodpfxozii Dne Ah Sen KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units – Behringer HBE 321 A dynamic new machines, available for immediate delivery from stock. Attention: You can receive up to 15% in funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (item no. 33) Active cutting monitoring (item no. 22) BEHRINGER screw-type chip conveyor (item no. 105) Automatic bar-end detection (item no. 535) Ledpe Adpvqsfx Ah Sshn Lighting (item no. 941)

Condition: used, The Eillert GWB 4 500 vegetable washing machine is suitable for washing both light vegetables (leafy vegetables, baby leaf, arugula, lamb's lettuce) and heavy vegetables (carrots, peppers, cabbage, tomatoes). The machine is equipped with a single water screw propulsion system (immersion washing), which submerges the products along the entire length of the washing tank. The water pressure can be adjusted using valves. After the washing process, the products are discharged via a mesh conveyor belt equipped with an air blower. The optimal washing performance and mixing action allow for washing various product combinations, such as salad mixes, raw vegetable mixes, stir-fry vegetables, and soup vegetables. This machine is ideal for medium-sized and large fruit and vegetable processing companies. The entire machine is made of stainless steel. Technical Specifications: Production capacity: 1,500 kg/h (depending on product type, washing time, feeding, and discharge conditions) Effective washing section (W x D x H): 4000 x 500 x 450 mm Air blower on the mesh conveyor belt Ljdpfxo Aa Rhyo Ah Sohn Product infeed height: 1040 mm Product discharge height: 910 mm Voltage: 400 V (3+N, 50 Hz) Power: 3.47 kW Weight: 1000 kg Year of manufacture: 2006 Machine dimensions (W x D x H): 6650 x 1290 x 1560 mm

Condition: used, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Year of manufacture: 1996 Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Ledoz R N Ddepfx Ah Sehn Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Serial number: 11676-FBZ - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 4000 - Y-axis travel [mm]: 935 - Z-axis travel [mm]: 1000 - Table length [mm]: 4500 - Table width [mm]: 800 - Tool holder: ISO50 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 2,000 mm, total width: 1,600 mm, total height: 2,350 mm, Colour: White Empty weight: 3.000 kg - Drive system: Conventional - Model: vertical - Number of axes [pcs]: 3 - Power [kW]: 5.5 - Max. stroke [mm]: 250 - Max. reach [mm]: 365 - Table diameter [mm]: 500 - Table length [mm]: 500 - Table width [mm]: 500 - Table depth [mm]: 500 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 250 - Min. stroke speed [rpm]: 22 - Max. stroke speed [rpm]: 112 - Transport dimensions: 2000mm x 1600mm x 2350mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lhjdpfxsz R Dr Uj Ah Sen Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,500 mm, total width: 1,400 mm, total height: 1,400 mm, Year of manufacture: 1980 Colour: Green Empty weight: 2.500 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 802315 - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 5.5 - Shaft diameter [mm]: 105 - Moment of resistance [cm³]: 30 - Top roll diameter [mm]: 275 - Bottom roll diameter [mm]: 275 - Capacity diameter round [mm]: 60 - Options: Extra rolls - Transport dimensions: 1500mm x 1400mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg Lhsdjzx Undopfx Ah Ssn - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 7,100 mm, total width: 1,300 mm, total height: 1,300 mm, Year of manufacture: 1987 Colour: Green Empty weight: 4.000 kg Price: On request - Year: 1987 - Serial number: 301/405 - Drive system: Conventional - Folding machine model: Semi-automatic - Drive system: Hydraulic - Power [kW]: 2.2 - Bending direction: Upward bending - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 6020 - Max. opening [mm]: 150 - Stop type: Manual - Angle adjustment: Manual - Max. bending angle [°]: 135 - Options: Long folding machine - Transport dimensions: 7100mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information Lhodpfx Ajzrhtyjh Sen VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Ljdpjzy E Taefx Ah Sehn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 Lsdpezkudcefx Ah Sohn - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum