Used Spraying Technique for sale (1,938)

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Iisdjw Rpxcspfx An Nef Emergency push-button Discharge hopper

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW Iiedpfxjzubtlo An Nof • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1.811-943.0, high-pressure hose length: 45 mm, pressure: 230 bar, fuel: diesel, power: 6.8 kW (9.25 HP), temperature: 95 °C, For sale is a well-maintained and fully functional Kärcher HD 1000 DE hot water high-pressure cleaner, manufactured in 2020, from our commercial cleaning business. The machine is in good used condition and is ready for immediate use. It has been thoroughly cleaned and serviced before sale. The engine oil and the oil of the high-pressure pump have been replaced, and the air filter has been cleaned. The high-pressure cleaner features a robust Yanmar diesel engine and a diesel-fired hot water generator. The high-pressure pump, engine, and hot water operation function perfectly. An operating hour meter is not installed on the machine, therefore, operating hours cannot be specified. Reason for sale: The machine is being sold solely because we have now installed an equivalent hot water high-pressure system permanently in one of our vehicles. Therefore, this mobile unit is no longer needed. Inspection and a detailed test run under operating conditions are possible and expressly encouraged after scheduling an appointment. Iedpfx Aeztut Ajn Noif Technical data Manufacturer: Kärcher Model: HD 1000 DE Article number: 1.811-943.0 Year of manufacture: 2020 Drive: Yanmar diesel engine Displacement: 435 cm³ Engine power: 6.8 kW at 3,600 rpm Working pressure: approx. 190 bar Max. pressure: 230 bar Flow rate: 15 l/min (900 l/h) Max. water temperature: 98 °C Burner output: 59 kW Weight: approx. 197 kg Operating hours: not readable / no operating hour meter available Extensive Kärcher accessories included The machine is sold as a complete, ready-to-use package: * Kärcher EASY!Force Advanced high-pressure gun * High-pressure lance with pressure regulation * Kärcher EASY!Lock system * 30 m high-pressure hose * additional 15 m high-pressure hose * coupling to connect both hoses - allowing up to 45 m hose length * Rotating nozzle / rotor nozzle * Flat spray nozzle * Kärcher eco!Booster TR 50 * integrated hose reel Especially the combination of the 45 m high-pressure hose, EASY!Force Advanced, and the different nozzles makes the machine interesting for larger areas and professional applications. Maintenance performed before sale: * Engine oil replaced * High-pressure pump oil replaced * Air filter cleaned * Machine completely cleaned * High-pressure function tested * Hot water / burner function tested * Functional test performed The machine is in perfect technical condition and ready for immediate use. Suitable for, among other applications: Commercial cleaning, facade cleaning, industrial and hall cleaning, construction companies, agriculture, agricultural machinery cleaning, municipal services, and other professional high-pressure and hot water cleaning tasks. Location: 45966 Gladbeck, North Rhine-Westphalia Inspection and test run: Possible and expressly desired after prior appointment. Sale by a commercial enterprise. An invoice with VAT will be issued.

Condition: ready for operation (used), Wagner paint unit Paint and lacquer pump MODEL T.371 Iisdpfx Aoyaqpbon Njf

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Iijdpfx Aozb Il Non Nsf Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. Iijdpfx Asv N D Ewon Nof - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: E21MI19102784225, This is a combination oven/steamer, model CMP 201 in electric version, from the premium manufacturer Rational, manufactured in 2019, with only 1982 operating hours. Iiedjzkkg Hjpfx An Njf The unit features an automatic self-cleaning program!! The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection. It will be sold with a 6-month warranty. These are current, original photos!!! The combination oven/steamer is expected to be available from week 30. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational equipment model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI19102784225 Year of manufacture: 10/2019 Condition: Used, inspected and fully functional. Further details: Possible applications: Steam mode: from 30° C to 130° C Convection mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Bringing pre-prepared and chilled dishes to the optimal serving temperature under ideal conditions. Automatic separation of fat for clean cooking chamber air Semi-automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of sensor Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V Iiodpfx Aozgwzven Nef - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 20-19/2010, total length: 5,000 mm, total width: 2,800 mm, total height: 1,200 mm, input voltage: 400 V, Equipment: CE marking, Horizontal washing machine (standalone unit, positioned before the Benteler edger) Width: 2600 mm 1 pre-wash zone – spray zone 1 main wash zone with 4 brushes Ijdpfx Aszqtk Isn Njif including 1 m inlet/outlet

Condition: good (used), Year of construction: 2014, Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system Iiodpfx Anjzuk Sds Nof -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 mm -Transport dimensions: 1640/850/H1560 mm / 2230/800/H200 mm -Weight: 555 kg

Year of construction: 2020, condition: used, functionality: fully functional, This is a combination steam oven, model CMP 201, in an electric version, manufactured by the premium brand Rational in 2020, with only 1361 operating hours. The unit features a fully automatic self-cleaning program!! The combination steam oven is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, wiring diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI20022814159 Year of manufacture: 2020 Condition: Used, inspected and fully functional. Further information: Possible applications: Steam mode: from 30° C to 130° C Convection mode: from 30° C to 300° C Ijdpfx Ajzqthmon Nsif Combination mode: from 30° C to 300° C Finishing®: bringing prepared and chilled dishes to the ideal serving temperature in the optimal climate Automatic separation of fat for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food Ventilated double-glazed door (swiveling for easier cleaning) Cooking chamber lighting Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray nozzle with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2020, condition: good (used), Lode Valiant 2 Sport Treadmill (2021/2022) – Lightly used in a clinical research setting – Includes a 1-month warranty. Smooth start at 0.0 km/h with precise control from 1.0–25.0 km/h in 0.1 km/h increments. The low-profile front cover leaves the athlete’s stride unobstructed and provides space for a mirror or camera at the front for real-time technique monitoring. Generous running deck: 70 × 190 cm standard; incline 0–25% for versatile protocols. XL option: 80 × 200 cm deck for larger subjects or high-speed work. Use cases: Sports medicine labs, CPET/stress testing, gait analysis, and high-performance training, where fine speed control and seamless device integration are essential. Also included: A comprehensive set of safety and usability features designed for continuous clinical use. Speed: Max: 25 km/h (15.5 mph) Min (operational): 1.0 km/h (0.6 mph) Adjustment step: 0.1 km/h (0.1 mph) Incline: Positive incline: 0–25% Adjustment step: 0.5% Iiodpfx Anszhicus Nof Optional decline: down to −10% (with accessory) Accuracy: Speed accuracy: ±5% Incline accuracy: ±0.5% Comfort / Capacity: Max user weight: 225 kg (496 lb) Certification: CE class Im (MDD 93/42/EEC) With optional SpO₂: CE class IIa With optional BPM: CE class IIa IECEE CB: certified

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Operational) For sale is a complete, fully operational paint booth machine dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional coating applications. System Components: 1 pc. belt conveyor • Length: approx. 1,900 mm • Belt width: 1,400 mm • Conveyor speed: 1.7 – 10.7 m/min 1 pc. CEFLA EASY 2000 automatic spraying machine Condition: Used, fully functional Regularly serviced Immediately ready for use Field of application: Ideal for industrial coating and drying processes, e.g. furniture or wood processing sectors. Iijdpsxdwi Iofx An Nsf Other information: Viewing possible by appointment

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate Iiodpfx Aneq Ewgke Nof ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: used, Year of construction: 2023, Edge banding machine Manufacturer: Biesse Type: Akron 1440 A Year of manufacture: 2023 Technical data - Panel height*: 10-60 mm - Edge height: 14-64 mm - Edge thickness from roll: 0.4-3 mm - Edge thickness in strip form: 0.4-12 mm - Panel overhang over the chain: 25 mm - Panel length: 140-3200 mm - Minimum panel width (at a length of 140 mm): 85 mm - Minimum panel width (at a length of 250 mm): 50 mm - Chain feed speed: 12 m/min - Distance between panels: 450-650 mm - NC axis package for automatic machine setup - Mounting kit for workpiece return * Minimum panel height: 8 mm at a maximum edge thickness of 1.5 mm. Depending on the selected processing units. Maximum permissible feed speed: 12 m/min. Units Anti-stick spray unit ADZ02 Pre-milling unit RT02 - two high-frequency motors, each 1.8 kW, 12000 RPM Gluing unit VC-511 - Processing of EVA and PUR granular adhesive - Filling volume: 1.5 kg Pressure zone - 1 driven pressure roller 100 mm, with independently adjustable pressing pressure - 2 and 3 pressure rollers, not driven, 60 mm, with anti-stick coating, arranged conically in relation to each other and pneumatically adjustable Trimming unit IT-70-S - two high-frequency motors, each 0.8 kW, 12000 RPM - The trimming can be performed straight (0°) or at an angle in a range of 0 to 15°. - Anti-static/coolant spray device after the trimming unit Flush trimming unit RF02 - two high-frequency motors, each 0.65 kW, 12000 RPM Corner rounding unit - two high-frequency motors, each 0.65 kW, 12000 RPM - Corner rounding is possible for both workpieces with a straight edge profile and for postforming and softforming profiles at 90° and 180° corners. Edge scraping blade RB02 - Switching between two processing profiles is done manually. Glue line scraping blade RC02 Polishing unit SZ02 - two motors, each 0.37 kW, 2800 RPM Hot air blower PH-501 - Power: 2 kW - Infinitely adjustable temperature control Iiedpfxszuyk As An Nsf Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system Iedpfxjzf N H Uo An Nsif - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2000, machine/vehicle number: A 00 12 006 / 0100, with new ASCOM gunl control, PLC, light curtain, and touch panel, mounted at the inlet of the automatic sprayer. - Manufacturer: Venjakob - Type: VEN SPRAY Duo - Retrofit 2026 (year of manufacture: 2000) - Working width: 1300 mm - Right-hand operation - Price for reconditioned machine - Current condition, in the reconditioning phase - Duo pistol drive - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm Isdpfxox Ihvpo An Neif - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The photos show only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Year of construction: 2020, condition: used, functionality: fully functional, This is a combination steamer, model CMP 201, in an electric version, manufactured by the premium brand Rational, built in 2020. The unit features an automatic self-cleaning program! The combination steamer has only 982 operating hours. The combination steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible options for shipping or self-collection. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow, and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI20022814161 Year of construction: 2020 Condition: Used, inspected and fully functional. Further information: Possible applications: Steam operation: from 30° C to 130° C Hot air operation: from 30° C to 300° C Combination operation: from 30° C to 300° C Finishing®: prepares pre-cooked and chilled dishes to the optimal serving temperature in an ideal climate. Iedpfezmu Akex An Neif Automatic separation of fat for clean cooking chamber air. Automatic cleaning program. 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food. Ventilated double-glazed door (swivels for easy cleaning). Cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic rinsing and emptying). Handheld spray nozzle with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Here are 3 combination steamers, convection ovens from the manufacturer Convotherm, model OGS 20.20, gas-powered version, direct injection, no boiler. Offers for export in a package are preferred. Our ID Nos. 9361 + 9362 + 9363 The units are set for natural gas; they can also be converted to propane gas. The combination steamer is equipped with a trolley for 20 x 2/1 GN or 40 x 1/1 GN and with insert racks 2 x 1/1 GN. The units are sold in a package, without inspection and warranty, as returned by the customer; inspection work will certainly be necessary for a new start-up. Wiring diagrams and documentation are included. Only frozen ready-made meals have been heated/regenerated in the units. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality brand-name equipment at fair prices Iodpfszvd H Dox An Neif Professional overhaul / inspection & expert cleaning checked & fully functional Flexible options for shipping or self-collection Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Inserts: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Condition: Used, no inspection Additional information: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (icon) for quick selection of defined cooking recipes Tray Timer / staggered loading Start time preselection in real-time mode Night baking Delta-T baking (multi-point core temperature sensor required) Cook & Hold Programmable with 250 cooking recipes, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking recipes Disappearing door: more space and work safety Double-glazed door with integrated door stop antibacterial door handle latch with ventilation position and safety function Door handle latch with closing function Motor brake when opening the cooking chamber door: less steam release Fan with autoreverse operation Handheld spray nozzle with stepless adjustment Multi-point core temperature sensor Height-adjustable device feet Easy operation via menus/icons Bright graphic display Digital setting rocker for easy adjustment of temperature, time and core temperature Modular processor control with clear display and module self-monitoring RS232 interface Storage of all device settings and cooking recipes in an additional memory module Permanent self-diagnosis for error detection System with full-text error description Safety program mode: operation of the device with limited functionality possible Basic prison version Robust construction in stainless steel Seamlessly welded cooking chamber Rounded cooking chamber corners Intake plate easily removable Hygienic socket seal Cooking chamber lighting with shock-resistant glass cover Including loading trolley with condensate collection tray Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints Iijdpfx Asx Ihvvjn Nef - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, Year of construction: 2025, functionality: fully functional, maximum load weight: 200 kg, warranty duration: 24 months, Available ex-stock Switzerland – immediate delivery! 24 months warranty Net capacity: Cleaning area: D=900 mm Internal height: 530 mm Loading weight: 200 kg Machine body, internal piping system, control cabinet and washing basket made of stainless steel - 2 washing pumps for efficient cleaning - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking mechanism - Removable filter plate Accessories: Ijdpfx Asw Ic Hnon Noif 1x transport trolley with pull-out basket Steam extraction Automatic level top-up Oil skimmer, model WE Draining device / floor flushing with hoses and manual ball valve

Condition: used, Year of construction: 1992, functionality: fully functional, total length: 6,500 mm, total height: 2,800 mm, total width: 3,000 mm, type of input current: three-phase, input voltage: 400 V, inner dimension length: 6,000 mm, Equipment: lighting, Complete powder coating system for sale. Consisting of a curing oven manufactured by Wurster, a coating booth with extraction system manufactured by Intec, and sliding rails and a moving system. Spray system for chemical pretreatment. Coating equipment and a large quantity of coating powder can be purchased separately. Approximately 200 cartons are available, 50% filled, totaling approximately 2 tons. Naturally, some of the powder is older. The price for the powder is 2500 euros net for collection. Isdpfxozmup Ds An Noif

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 404 mm, total height: 590 mm, total length: 556 mm, overall weight: 35 kg, table height: 100 mm, table length: 350 mm, table width: 170 mm, space requirement width: 404 mm, space requirement height: 590 mm, working height: 100 mm, space requirement length: 556 mm, working width: 350 mm, Professional Laser Engraving Machine Magic L3 30W - Great Opportunity! For sale is our high-quality Magic L3 laser engraving machine with a 30W fiber laser source. TECHNICAL DATA: • Model: Magic L3 30W (Red Technology) • Laser Type: 30W Fiber Laser • Original Price: 15,490 EUR (see manufacturer's website) Iiedpfx Anoznncto Nsf • Working Area: 350 x 100 x 170 mm (W x H x D) • Engraving Speed: up to 4000 mm/s • Dimensions: 556 x 404 x 590 mm • Weight: approx. 35 kg ✅ CONDITION & USAGE: • Period of Use: February 2022 to September 2025 • Low Usage: Used only a few times per day for short periods • NO industrial continuous operation! • Well-maintained and fully functional • Automatic safety cover functions perfectly • Adaptive cooling system runs quietly and reliably IDEAL FOR: • Jewelers and goldsmiths • Engraving on gold, silver, stainless steel, aluminum, brass • Various engraving techniques: hatching, contour, blackening • Serial numbers, logos, texts, graphics SCOPE OF DELIVERY: • Magic L3 laser engraving machine • MagicArt 7 software (easy to use!) • Original accessories • Additional accessories available (see my other listings) ⭐ SPECIAL FEATURES: • Automatic safety cover (closes before laser operation) • Exhaust set connection available • Supports DXF, PLT, SVG, DGN, JPEG, PNG, BMP • Automatic number generation for series • Very low maintenance and long-lasting • German software interface possible PRICE: 8999 EUR (negotiable) A fair offer for a professional device in top condition! CONTACT & INSPECTION: • Inspection and demonstration possible by appointment • Pick-up only / Shipping by arrangement • VAT can be shown on request If you are interested or have any questions, please contact me! Keywords: Laser engraving, fiber laser, engraving machine, jeweler, goldsmith, jewelry engraving, metal engraving, Red Technology, Ingraser, marking laser

Condition: good (used), Year of construction: 2017, NNP Rotary moulder Iodpfx Ansuanp Nj Nsif Stainless, belt dimensions 2250mm x 650mm, 650mm rotary moulder, previously used for pizza bases, with top mounted oil spray nozzle

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Iodpfow R Enmox An Njif Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.