Used Pot Tape Drilling Machine for sale (65,491)

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Lsdpow I Um Tofx Adterk Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Availability: by arrangement Location: Solingen

Year of construction: 1986, condition: used, - working length (mm): 3200 Ljdpfj Drmxex Adtjrk - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Lredpfxew I Uwxe Adtek Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Lredpfsw I Ugtex Adtok Weight 80 kg Availability: short term Location: Röllbach

Condition: good (used), Year of construction: 2008, functionality: fully functional, Types:801 Machine nr:112884 Stop 2,29 Kw Stop and feed Lodpfx Adeubxzrjtsrk

Condition: excellent (used), IM Very good condition. Lredpevcyznofx Adtjk

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, Ganomat Selekta and Case Clamp We are offering a Ganomat Selekta machine as well as a case clamp for sale. Both machines have only been used for a few days and are therefore in excellent, almost new condition. Location: Bosnia and Herzegovina For further information or pictures, please feel free to contact us. Lredpfx Adow U Nxwotsk

Condition: good (used), Year of construction: 1995, Pot hole boring machine Grass ECO Press Year of manufacture 1995 S/N 9502665 in good condition right and left linear guide (work table can be supplied ) weight approx. 45 kg 380 V - 50 Hz - 2,5 A pneumatic connection - max 6 bar Ledpfxsk D T Ncj Adtsrk CE marked

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. Lsdpfx Adeyy Rn Sjterk * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Lrjdpfx Adjy Akdxstsk Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, production capacity: 1,500 unit/h, TECHNICAL DETAILS Minimum panel width: 250 mm Maximum panel width: 3,000 mm Minimum panel length: 100 mm Maximum panel length: 900 mm Minimum panel thickness: 12 mm Maximum panel thickness: 60 mm Maximum panel weight: 50 kg Lrsdpfx Adeyzn Sdotsk Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 EQUIPMENT EASYTOOL software 5 split lower vertical drilling heads, automatically adjustable with NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (per side), independently arranged on two levels External reference: MMA004.003

Condition: ready for operation (used), functionality: fully functional, workpiece weight (max.): 50 kg, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, TECHNICAL DETAILS Panel width min.: 250 mm Panel width max.: 3,000 mm Panel length min.: 100 mm Panel length max.: 900 mm Lrsdpfx Ajyzn D Tjdtsk Panel thickness min.: 12 mm Panel thickness max.: 60 mm Maximum panel weight: 50 kg Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 EQUIPMENT EASYTOOL software 5 segmented lower vertical drilling heads, automatically adjustable via NC control, each with 26 independent spindles 3 segmented upper vertical drilling heads, automatically adjustable via NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (each side), independently arranged on two levels External reference: MMA004

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Lsdpfx Adsyzy T Tstsrk Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: excellent (used), Year of construction: 1996, Overhauled in 2005 Number of spindles: 2 Drilling capacity per spindle, steel: 1-6 mm Drilling depth: max. 350 mm Travel distance Z: 350 mm Travel distance W: 350 mm Drive power per spindle - 100% duty cycle: 3.7 kW - 50% duty cycle: 5.5 kW Spindle speed: 3,000 - 27,000 rpm Lrsdpfxoy Eykgo Adtjk Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow rate: 48 l/min Coolant volume: 1,000 l

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. Ljdev Rpf Sspfx Adtsrk A demonstration is available at any time in our showroom.

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Lredpoy D Hr Usfx Adtjk Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: not inspected (used), Year of construction: 1987, machine/vehicle number: 5755, functionality: unexamined, drilling depth: 120 mm, rotational speed (max.): 1,125 rpm, rotational speed (min.): 160 rpm, table width: 300 mm, table length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed range: 160 – 1,125 rpm Lrjdpfx Ajy D Sydodtek Drilling depth: up to 120 mm Table dimensions: 300 x 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 500 x 1,800 mm Machine weight: 250 kg FEATURES Vice External reference: 18

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 3, drilling depth: 120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 200 rpm, total width: 400 mm, total length: 600 mm, total height: 1,820 mm, table width: 320 mm, table length: 400 mm, Flott SB M3 ST 3-phase 380V motor runs smoothly. Lrodpfoy D Uihox Adtok Stepless speed adjustment via variomatic spindle drive. Spindle speed adjustable from 200 to 2000 RPM. MT3 spindle taper. Röhm Supra 3-16mm drill chuck included. Machine vice included. Spindle safety guard. Emergency-off switch. Drilling depth adjustable. Maximum drilling depth: 120mm Table size: 400x320mm Table height adjustable. Overall dimensions: 60x40x182cm Year of manufacture: 1987 Made in Germany Overall good condition. Contact us for shipping options! € 2,350.00

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW Lrjdpfx Ajfbh Akjdtok weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: good (used), Spindle: 130 mm Travel X: 5000 mm Lodpfx Asy D Tvgedtjrk Travel Y: 2500 mm Travel Z: 1000 mm Rotary table: 2000 x 2500 mm, approx. 30 tons With faceplate Vertical head Some tools included Without platen field

Condition: used, Machines for Export from Liquidation Stock No. 62506 = Double Mitre Saw RAPID Type DGL 5000 / 500 = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 58052 = Eccentric Press MÜLLER GEFREES = Weight approx. 4,700 kg = Special price EUR 2,400 Lredpfx Adjy Erzdetsk Stock No. 59408 = Eccentric Press Weingarten = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58984 = Eccentric Press Müller Gefrees = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58309 = Eccentric Press MÜLLER GEFREES = Weight approx. 1,000 kg = Special price EUR 1,000 Stock No. 60975 = Eccentric Press 16 tons (Year 2017) = Weight approx. 800 kg = Special price EUR 1,000 Stock No. 62267 (1) = Eccentric Press Weingarten 75 tons (Machine 1) = Weight approx. 4,800 kg Stock No. 62267 (2) = Eccentric Press Weingarten 75 tons (Machine 2) = Weight approx. 4,800 kg Stock No. 54183 = Hydraulic Press MÜLLER 10 tons, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = Hydraulic Press MÜLLER Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic Press – Hydraulic power unit standing alongside = Weight approx. 3,000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = Column Drilling Machine WEBO MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = Radial Drilling Machine WEBO Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines for immediate export available. For example: 10 units welding equipment CLOOS, ESS, etc. 2x CNC lathe HITACHI SEIKI

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min Lredjy Agpqepfx Adtjk column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm well-maintained condition (!!) current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German

Condition: used, total width: 1,300 mm, total length: 750 mm, total height: 2,900 mm, Empty weight: 1.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive system: Gear drive - Table type: Fixed table - Table length [mm]: 700 - Table width [mm]: 600 - Drilling depth [mm]: 220 - Drilling capacity [mm]: 50 - Min. spindle speed [rpm]: 61 - Max. spindle speed [rpm]: 1239 - Transport dimensions: 750mm x 1300mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lredsyznbrjpfx Adtjk Lukas van Rossum

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Carrier machining Lsdpfev Iamzex Adterk

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Lrjdpfx Ajvm Akgjdtok universal head portable radial